RHK STM100 Controller with ISA cards for PC Control, Software, Cables Lab

FB Fans & Blowers Ltd Centrifugal Fan Type 400 (350) SBSZ100 This was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order to 3250rpm It is in good cosmetic condition with minor marks.

This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition a (more)nd is ready for immediate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

The Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector utilizes air for pressure transmissio (more)n to guarantees clean and simple handling of a piston pump. Change in volume: 88 µl Adjustable total volume: 2,640 µl Max pressure: 20,000 hPa Dimensions: 175 x 60 mm Weight: 1.4 kg

Motic AE21 Series Trinocular Inverted Microscope with 3x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit has been tested and is in good working order. It is in very good cosmetic condition with minor marks It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

Labconco Glass Trap for CentriVap DNA Concentrator Liquid Trap prevent liquid from entering the pump (more). LiquidTrap Kit includes a borosilicate glass container that holds 240 milliliters ofliquid, an epoxy-coated steel bracket for attachment to the side of a CentriVapConcentrator or RapidVap Vacuum Evaporation System, 18" (45.7 cm) of 0.5ID (1.3 cm) vacuum tubing, and two vacuum tubing clamps. INCLUDED: The Labconco 7970500 Glass Trap for CentriVap DNA Concentrator includes: - Steel Bracket for Attachment to CentriVap - Vacuum Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System Features - Patented moisture sensor (more)protects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer System includes the Labconco 700801000 FreeZone 8L -50C Console Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV8 Vacuum Pump. The Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with stainless steel coil and collector is designed for lyophilizing moderate to large sample loads or numerous small container batches. The console features a front viewing window, interior space for a vacuum pump, and accommodation for a large tray dryer such as the FreeZone Stoppering Tray Dryers (pump and tray dryer sold separately). These models offer the broadest range of built-in options including a shell freezer. The upright stainless steel collector coil holds 6 liters of ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50° C (-58F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV8 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 8L -50C Complete Freeze Dryer System includes: - Labconco 700801000 FreeZone 8L -50C Complete Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV8 Vacuum Pump - All Vacuum Tubing - EMF20 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Hei-CHILL 1200 Chiller 115VFeatures - Designed for reliable continuous operation in the lab (more)oratory - Automatic start and shut down feature - Temperature range of -10°C to 40°C - Temperature stability of ± 0.5K - Maximum flow rate of 9L/min for models 600W and under, and 20L/min for models over 600W - Viewing window for thermal fluid level Clearly arranged control elements, with a large LED display, membrane keypad, and liquid level indicators Ventilation grille is held in place with magnets, allowing for very easy access for cleaning the air filter All Hei-CHILL models feature an RS 232 interface and alarm output for external communications The Hei-CHILL models with cooling capacities from 250 to 1,200 W are specifically designed for reliable continuous operation in the laboratory. The magnetic coupling of the pump and the electric motor prevents leakages. The large coolant reservoir to compensates for peak performance during the evaporation process. Other features include: clearly arranged control elements, large LED display, membrane keypad and window for monitoring the thermal fluid level. INCLUDED: The Heidolph Hei-CHILL 1200 Chiller 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty