Eppendorf CellTram Air 5176 Pneumatic Manual Microinjector

2 CP-8400 parts chromatograph autosamplers and an old VARIAN / BRUKER model For parts

Beckman Coulter Biomek NXp Laboratory Automation Workstation This item was removed from a university (more) lab where it was surplus to requirements. The unit powers on and is in good cosmetic condition with some surface wear. Without the software, the robotic functions were unable to be tested, so no further functional testing was conducted. Model: Biomek NXpSerial No.: A318400876 Additional Components:- DFMZ Design Filtration Microzone - Model: DA1-1x2-2 - Serial No.: 952213 Accessories Included:- Insert Pak 11mm Non-Sterile - Serial No.: 3364 - 2 x Top Plate, Multi-Config Peltier ALP - Part Number: A32165 REV AA - 15 x Reservoirs, 75 ml, Case Sterile - Lot: P61122MPI - Physical Manual: Version 3.3 Tutorial

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

Tecan Hydrospeed microplate washer. For 96-well and 384-well plates. Indexable 96-pin wash head. Was (more)h volume 50 - 3000 μl in 50 μl increments (96-well plates); 10 - 1000 µL in 10 µL increments (384-well plates). Dosing accuracy 3 - 4% uniformity across the entire plate. Dispensing volume 50 - 400 μl in 50 μl increments (96-well plates); 10 - 120 µL in 10 µL increments (384-well plates). Primer and rinse volume 100 - 800 ml. Residual aspiration volume <2 μl. Linear stirring at three different intensities. Wash/Waste Bottle Capacity 2 x 4 L wash bottles, 1 x 10 L waste bottle and 1 x 4 L foam trap bottle. Dimensions 388*430*288 mm; 15 kilos. User manual. The HydroSpeed is Tecan’s advanced plate washer, designed for quick, parallel washing of entire 96- and 384-well plates. This avoids time differences between the wells for uniform results. In addition, the HydroSpeed provides full control of wash power for optimized washing of cells, beads and ELISAs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Demo item. 12 months warranty.

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm&nbsp;Arbor Size: 32mmWheel RPM: 2830 RPM&nbsp;Vice cutting capacity: 80mm&nbsp;- 75mm diameter&nbsp;Safety features: Emergency stop, safety switch, electronic break&nbsp;Coolant connection size: 12.5mm&nbsp;Drain size: 32MM ID 34MM OD&nbsp;Coolant tank size: 23 Litre&nbsp;Power: 3 PHASE - No neutral&nbsp;Dimensions: : 800 x 550 x 450 mm&nbsp; Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

Ohaus Guardian 2000 e-G21STRDS Magnetic Stirrer, 115V The Ohaus Guardian 2000 Series Hotplates, Stir (more)rers, and Hotplate Stirrers are ideal for education and other lab environments that require affordable, everyday fast heating and reliable stirring up to 15L. All three sizes offer simple knob control to easily adjust the heating and stirring functions. The durable housing includes a built-in support rod holder which accepts the optional support rod. Stirring models include PTFE coated stir bars. The Guardian 2000 Series units feature powerful stirring and fast heating at an economical price. Safely heat up to 500°C and stir up to 15L with easy-to-use knob control for simple and reliable everyday heating and stirring in the lab. Designed to last - the rugged metal housing has a spill resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top plate is perfect for easy clean up. Safety is also of utmost importance, and the prominent hot top indicator light illuminates when the heater is above 40°C, keeping the end user safe during all heating applications. INCLUDED: The Ohaus Guardian 2000 e-G21STRDS Magnetic Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hersteller: Eppendorf   Modell: 5702 + ausschwenkbarer A-4-38 Rotor Beschreibung: Die Eppendorf 5702 (more) Centrifuge ist eine leistungsstarke Laborzentrifuge für die Trennung verschiedener Proben. Mit ihrem kompakten Design und einer maximalen Drehzahl von 4.400 RPM (Umdrehungen pro Minute) ist diese Zentrifuge ideal für eine Vielzahl von Anwendungen in Forschung, Klinik und industriellen Laboren. Die Eppendorf 5702 Centrifuge verfügt über einen Rotor mit einem Fassungsvermögen von 4 x 100 mL oder 30 x 1,5/2 mL Röhrchen, was einen flexiblen Einsatz für eine Vielzahl von Probengrößen ermöglicht. Die Zentrifuge verfügt außerdem über ein intuitives Bedienfeld mit einer benutzerfreundlichen Oberfläche für eine einfache Bedienung und eine Vielzahl von programmierbaren Funktionen für individuelle Läufe. Kernmerkmale: - Sehr kompakte Grundfläche, die auf jeden Labortisch passt - Niedrige Einstiegshöhe für einfaches Be- und Entladen der Proben - Funktion "At set RPM" (bei eingestellter Drehzahl) startet den Timer bei Erreichen der gewählten Drehzahl für reproduzierbare Zentrifugationsläufe - Gehäuse und Pipettenhalter aus Edelstahl sorgen für Stabilität und Langlebigkeit Technische Daten: Max. Drehzahl: 3.000 x g (4.400 U/min) Abmessungen (B x T x H): 32 x 40 x 24 cm Gewicht: 20 kg Eppendorf Schwingeimer-Rotor: A-4-38 Maximale Drehzahl: 4400 U/min / max 4x400g Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.