Applikon My-Control Z310210011 Bioreactor Controller Lab

Wave Bioreactor System 2/10 EH Lab This system was removed from a university where it was surplus to (more) requirement. All units are in good cosmetic condition and powered up, we are unable to test this system further at our facility. The system comprises the following: Wave Bioreactor System 2/10 EH BASE2/10EHCode: 28943517S/N: 1578302 PERFCONT2ECode: 28943517S/N: 1578302 CO2MIX20Code: 28945751S/N: 1475936

This was removed from a lab where it was surplus to requirements. All units power on, and with the r (more)ocker working, the temperature rises when weight is put on the sensor. The lab confirmed it was working prior to removal. There is nothing to connect the CO2MIX unit to the main part. The PSU is included. Included are; Wave Bioreactor System 2/10 EHCat no. 28937786SN - 1441808with Wave KIT2EH (48 x 30cm)Cat no. 28411541SN - 87002158 Wave PERFCONTE2ECat no. 28411635SN - 0073 0608 P2EHConnected to Sartorius ScalesModel - EB15DCE-ISN - 22006984 Wave CO2MIX20Cat no. 28412947SN - 1437562 Wave LID2/10W-OPAQUECat no. 28411533 Filter HeaterPN - 28411639SN - 2742539

This Applikon Biotechnology Z310110010 EZ-Control Bioreactor System was removed from a university la (more)b where it was surplus to requirements. Included are; Applikon Biotechnology EZ-Control Bioreactor SystemCat no. Z310110010SN - P17561/21The unit powers on and boots up.Unit dimensions - L41 W37 H72cm Parts:-Applikon Gas UnitCat no. Z351026010SN - P15698/901Powers on Applikon Type P100eCat no. Z510000010SN - P323750/24 Trolley Dimensions - L82 W53 H96cmTop Shelf - 80 x 50cmBottom Shelf - 80 x 50cm Consumables/Accessories:-Applikon 20L Appliflex Reusable pH & DO Sensors Cat no. Z650002040Applikon 10L Appliflex Reusable pH & DO Sensors Cat no. Z650001040Box of 1 x AppliSens Sensor ProbeBox of 6 x mixed AppliSens Sensor ProbesMechaheat JacketApplikon Slotted Blindstopper M18 X 1.5Applikon Impeller Marine "V"Wika GaugeVarious probe cables2 x Ethernet cablesApplikon Gas Outlet Bulkhead Connector Set of 8Applikon Ribbed Blindstopper G3/4"Various metal partsMetal clampApplikon Ribbed Blindstopper M30X1Wika Tube & Connection GaugeArrow Pneumatics partApplikon Start up kit

This HyClone 250L Single-Use Bioreactor SV50172.02 was removed from a university lab where it was su (more)rplus to requirements. The unit powers up and is in good cosmetic condition with marks from use. It comes with a 32A plug but has an adaptor with a standard plug. It also comes with 3 x Mixers & some other accessories.

Phenometrics enable scientists to study algae under the same conditions found outdoors in the ponds, (more) but in the much more efficient confines of the laboratory. Each computer-controlled PBR uses breakthrough technology to re-create the environmental conditions such as temperature, light intensity, and CO2. Choose from pre-programmed experiments, or quickly and easily design your own, with the growth variables that are most important to you. Many researchers use the PBR to set specific parameters to maintain consistency between experiments. Most importantly, the PBR enables reproducibility, a key factor in algae research experiments. The PBR saves time and money while producing better results. Each PBR is also a measurement instrument, measuring growth rates, pH, and other factors in the algae reactor vessel, which are displayed on the computer monitor in a graph or data display. It is customizable to accommodate various probes and sensors that monitor algae culture and growth metrics. 3000 μ-Einstein LED specially designed lighting system with conical vessel that accurately mimics BOTH raceway or production tube bioreactors (controllable from 0- 3000 in steps of 25 μ-Einsteins. Fully programmable Diurnal Cycles; you set the length of sunlight day, and also the hour of peak sunlight. Fully programmable heating and cooling, linkable to the diurnal cycle; you can independently set the hour of peak heating (if different from peak sunlight). Active cooling and heating, from 5 – 50°C Algal Command Software provides for complete, simultaneous, integrated control of up to 256 bioreactors from a single computer, with collation of all data. All the reactors are linked together via Ethernet Hub. CO2 programmable and controlled from Algal Command. Mixing through active magnetic stirring and/or gas sparging. Active sparging of up to two gasses Temperature measurement True Turbidostatic measurement Field-configurable, fully autoclavable, low cost durable polycarbonate reactor vessel The reactor vessel can have as many inlets and outlets as you require 100% (+/- 10%) directly-proportional (by volume) up-scale to pond, raceway, or indoor reactor pH measured and controlled by Algal Command Custom-engineered Turbidostatic Pump allows for true turbidistatic operation; fully programmable and computer-controlled. System contains 4 reactors and pumps with laptop Culture vessel volume: 700ml Working volume: 150 – 600ml Light intensity: Variable up to full ocean sunlight at equator (>3000 mmol photons m-2 s-1) in steps of 25 Temperature control: Active cooling and heating Culture temperature range: 10 – 50°C Diurnal + heating and cooling cycles: Fully programmable and independant Ability to control and measure pH: 0 – 14, may be controlled automaticly using CO2 gas Mixing: Magnetic stirrer Gas control: Computerized, CO2 or other as required Groth rate measurement: Continuous, via turbidistat Sterilization: Entire reactor vessel assembly, including culture medium, may be autoclaved on the “Liquid” cycle Turbidistatic pump: True turbidistatic operation, fully programmable from groth fase Dimensions (HxWxD): 482 x 241 x 318 mm Weight: 7kg

Ohaus Scout STX222 portable scale, with plate Ø 120mm These balances are ideal for laboratory and in (more)dustrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requi (more)rements. The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past. The fault is unknown but could be something to do with the pocket cell. The system is comprised of; 1x High-Q femtoREGEN Laser:Model IC-1030-1000 Yb HR REG AMP SHG-THG Inside the unit:1x User Replaceable Diode Module (URDM #2506)The unit is in good cosmetic condition. 1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nmThe unit is in good cosmetic condition.

Philips IU22 Diagnostic Ultrasound Machine This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We are told the unit is in working order but will require a service.

Un incubatore da laboratorio refrigerato di grande potenza e affidabilità. Grande dotazione di acces (more)sori e dotato di autosterilizzazione! Regolazione fine della temperatura, display chiaro e completo, classe di sicurezza al top. MATERIALI: - Struttura esterna in lamiera d’acciaio verniciata a forno con polvere epossidica antiacida - Camera interna in acciaio inox - Maniglia ergonomica, facile da usare e robusta DI SERIE: - Termoregolatore PID con doppio display e temperatura regolabile da 0°C a 100°C - Porta interna in vetro - 2 ripiani - Foro 10 mm per - Classe di sicurezza DIN 3.1, la più alta - Ventilazione forzata - Uscita dati RS-485 - Software gestione dati, cavo e adattatore USB di serie - Ciclo di sterilizzazione (160°C per 2,5 ore) Incubatore refrigerato ICT-C 52

Samples and applications - Preparation of foamy mixtures (ice cream, butter, margarine, icing) and s (more)preadable creams    - Preparation of tablet coatings - Preparation of ointments and pharmaceutical creams - Preparation of cosmetics (lip balm, soap, shampoo, conditioner, creams, lipstick, mascara) - Preparation of pigments, inks and paints - Preparation of biodiesel - Dispersion of petroleum derivatives (e.g. asphalt) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed