Agilent Technologies 1100 Series Bin Pump G1312A w/ Controller Lab

Chemical resistant vacuum pump consisting of N 820 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 20 l/min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 1,2 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Application Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Leybold RPK 3500 Cryo Pump This item was removed from a university where it was surplus to requirem (more)ent. The client notified us that it was working when last used, but it is advised for it to be serviced before use. All items included in the listing: Leybold RPK 3500PN: 891 67SN: A9006000 01 Leybold RGD 330PN: 89191SN: A8906000 28 Leybold REG-HeizungPN: 892 22SN: A 89 11 00088

This Agilent Technologies 1200 Series HPLC G1312A Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station Final Pressure 1 x10-7 hPa / 7. (more)5 x 10-8 Torr / 1 x 10-7 mbar Backing Pump Speed 1.8 m³/h / 1.06 cfm / 30 l/min Pumping Speed for N2 260 l/s Features - Compact series of pumping stations for all high vacuum applications - Simple operation with 7in. touch display - Remote control via web server available - Compatible with a wide variety of applications - Reliable and robust The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station is a compact, high-performance solution for all high vacuum applications. It offers simple operation through a 7-inch touch display and can be controlled remotely via a web server, making it highly versatile and user-friendly. Designed for reliability, it operates with a final pressure of 1 x 10⁻⁷ mbar and a pumping speed of 260 l/s for nitrogen. The backing pump, the MVP 030-3, delivers a pumping speed of 1.8 m³/h at 50 Hz, ensuring efficient performance. This turbo pumping station uses air-cooled forced convection to maintain optimal conditions and operates quietly with a sound pressure level of ≤50 dB(A). Its HiPace 300 turbopump and DN 100 ISO-K connection flange make it compatible with a variety of applications. Built to work worldwide, it supports input voltages ranging from 100-240 V AC. Weighing 20.5 kg, it is robust and reliable, offering consistent performance in environments with ambient temperatures from 5 to 40°C. INCLUDED: The Pfeiffer HiCube 300 Neo, 100 ISO-K, MVP 030-3 Turbo Pumping Station includes: - Backing Pump - Pfeiffer MVP 030-3 Diaphragm Pump - Protective Cap for High Vacuum Flange - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson MINIPULS 3 Pump (Drive Unit) with Two Channel, Standard Flow Head (R1)Features - Utilizes pos (more)itive displacement pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the Minipuls 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible.INCLUDED: The Gilson MINIPULS 3 Pump (Drive Unit) with Two Channel, Standard Flow Head (R1) includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nEXT85H ISO63 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum 5x10-9 mbar Inlet Connecti (more)on ISO63 NW16 Pumping Speed Nominal 503.99 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.With nEXT85 and nEXT55 Edwards offers a small and compact turbomolecular pump platform ideal for Analytical Instruments as well as for the R&D market. INCLUDED: The Edwards nEXT85H ISO63 NW16 80W Turbomolecular Vacuum Pump includes: - Power Cord - Two Year Manufacturer's Warranty

The Vortex ZX4 agitator is a modern and advanced vortex with variable speed and two operating modes, (more) sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared (IR) system detects the presence of the test tube and the instrument is activated automatically: less user operations, more comfort in the working environment Technopolymer structure and ergonomic design guarantee excellent chemical resistance and considerable stability on the laboratory bench, and can be used on many surfaces. Wide range of accessories. IR sensor, VELP patent VELP Scientifica is the only company in the world to supply the technological and revolutionary IR system: as soon as the test tube is detected by the sensor, the latter automatically activates the instrument, without the need for any pressure from the laboratory technician. Compared to the classic pressure mode, the patented IR sensor system guarantees a drastic reduction of the stresses perceived by the operator, increasing the comfort of the working environment. Flexibility, Numerous Accessories ZX4 is an extremely versatile solution, being able to be combined with a variety of platforms. The easy and safe attachment of the platforms is done with a simple push, and guarantees excellent performance in the mixing of many types of tubes and containers. - Variable speed operation, electronically controlled up to 3000 rpm - Wide choice of accessories for tubes, plates and bottles - Universal voltage / frequency model - The accessories adapt with a simple push - Excellent resistance to chemical agents thanks to the technopolymer casing - Excellent stability with zinc alloy base - Large, non-slip rubber feet to stay in the desired position - IP 42 protection against particles and liquids - Designed for maximum durability and backed by a 3-year warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 200 g), plastic box Number o (more)f pieces in the set: 11

Ohaus AX8201 Adventurer Toploading BalanceStriking theideal balance between inventive features and f (more)unctional, uncomplicated weighingcapabilities, the Ohaus Adventurer Pro II AX8201 incorporates all of theapplications necessary for routine weighing and measurement activities. With acolor touchscreen, GLP/GMP compliance capabilities, two USB ports, and muchmore, Adventurer AX8201 is the most complete balance in its class. 8200 g capacity, 0.1 g readability 175 x 195 mm platform Internal calibration 4.3 inch Full-color VGA graphic touchscreen with user-controlled brightness RS232, USB Host, USB Device (included). GLP/GMP data output with real-time clock Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu User selectable communication settings and data print options User definable project and user IDs Up to 9 operating languages Click Here to View Product Video INCLUDED: The Ohaus AX8201 Adventurer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty