Opentrons Pipetting Robot OT2 Lab Spares or Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Thermo Matrix PlateMate Plus Automated Liquid Handling System This was removed from a university lab (more) where it was surplus to requirements. The unit powers up and is in good working order. The unit communicates with the PC and appears to be in working order. It is in good cosmetic condition with a small chip in the casing. Included with it are; LG 24" MonitorThinkcentre PCLenovo Keyboard & MousePC Password Letmein01 Software installed:-Matrix ControlMate V1.3.38 Accessories:-Control PanelNalgene 10L Bottle3 x Packs of Matric D.A.R.T.s Disposable Automation Research Tips 30ul (1 sealed,2 opened) 96 well 30ul head.

Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation This was removed from a university (more) lab where it was surplus to requirements. The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks. It is fitted with a pipette head with 96 tips at 300µl.

Perkin Elmer Janus G3 Workstation This system was removed from a university lab where it was surplus (more) to requirements. The system is in good used condition, with various marks and signs of general use. Some of the VariSpan tips are slightly bent and will require replacement. The PC has WinPrep 4.9 software installed. The robot was initialized and successfully passed an XY random 100 move test with no errors. System consists of: - Perkin Elmer Janus AJM8001/T Liquid Handler - Equipped with Varispan 8 Tip Arm - Perkin Elmer Peri Pump - Lenovo ThinkCentre PC with keyboard, mouse, monitor, and barcode scanner - Running Windows 7 - Perkin Elmer WinPrep 4.9 software installed (software CDs included) - Riello UPS - Janus Printed User Manual Accessories included:- 16 x Spare Tips - 16 x Spare Tecan 20734804 Cavro Syringes - 5 x Waste Bottles - Various other small parts, spares, and consumables

The Gemini X2 Systems is designed for researchers who need the ultimate experiment flexibility. In o (more)ne easy setup, square wave and exponential decay waves can be applied to cells in any format. These systems incorporate remote operation functionality via footswitch or PC and internal log storage of experiment data for easy optimization, quality control requirements and troubleshooting. Electroporation of suspension cells can be achieved in 96-well plates with the HT plate handler. Usable with all cell electroporation Features: Square Waveform, Multi-Pulsing Square Wave, Exponential Decay Waveform, Multi-Pulsing Exponential Decay, Resistance/Pulse Monitoring, Experiment Log Storage, Preprogrammed Protocols, Unlimited Custom Protocol Storage, Remote Operation, PC Communications Voltage Range: 5 to 3000 V Pulse Width Range: 10 μs to 5 s Pulse Interval: 100 ms to 30 s Dimensions (DxWxH): 324 x 286 x 216 mm Weight: 7.3 kg

This Turnkey Instruments OSIRIS Environmental Particle Monitor & Tripod Housing was removed from (more) a university lab where it was surplus to requirements. The item powers on and is in reasonable used cosmetic condition. It has not been tested further at our facility. It comes in a carry case with a power supply, USB cable & other small parts/fittings. There is a software disk included. Housing Tripod Height - 135cm Last calibration date - 18/01/2022

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Radwag AS60 / 220.R2 PLUS Analytical Balance. Capacity 220 g. Readability 0.01 / 0.1 mg. Linearity ± (more) 0.05 / 0.2 mg. Minimum capacity 1 mg. Diameter of the plate 90 mm. Internal calibration. LCD screen. Interfaces: 2 × RS 232, USB-A, USB-B. Leveling system. Power supply 100 ÷ 240 V AC 50/60 Hz. Radwag AS60 / 220.R2 PLUS Analytical Balance. The AS R2 PLUS series balance is a standard analytical weighing device from the SYNERGY LAB line. The AS R2 PLUS is exceptional due to a range of modern construction solutions and systems that guarantee the reliability, precision and accuracy of measurement, and make daily operation easy. New ergonomic design. The latest AS R2 PLUS analytical balances have a spacious weighing chamber, and the large free space of the open door allows free access to the weighing pan and the use of laboratory vessels of various sizes. The stability of the measuring system is ensured by a better balance base made of aluminum. Thanks to the DUAL-CLICK system, the disassembly and assembly of the weighing chamber is done without the use of tools, and the special construction of the weighing chamber glass guides (without edges) significantly facilitates the cleaning of the device. Innovative construction solutions increase the durability and reliability of the balance in long-term operations. Leveling system The standard series of AS R2 PLUS balances is equipped with a spirit level at the front of the chamber, which significantly facilitates continuous level control. Internal calibration The modernization of the internal calibration system guarantees the accuracy of the indications in extremely adverse conditions.