KNF UN811KVP IP20-T Diaphragm Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND PC 620 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 620 select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with a single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 620 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity to run two demanding applications simultaneously. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it constantly monitors the pressure and switches to a 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 620 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

LABORATORY OVEN SLN SMART POL-EKO SLN - NATURAL AIR CONVECTION The SLN series laboratory ovens are d (more)esigned to reach high temperatures, up to 300 °C. Available from 15 to 245 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLN SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLN SMART SERIES The seven models of the SLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN260plus Natural Convection Incubator 256L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 256 L (9 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 256 L (9 cu.ft.) with a maximum chamber load of 661 lbs - Precise temperature control with a 0.1°C setting resolution and 2 Pt100 sensors DIN Class A for mutual monitoring - ControlCOCKPIT with TwinDISPLAY offers adaptive multifunctional PID-microprocessor control and dual high-definition TFT-color displays - Natural convection with fresh air admixture using an electronically adjustable air flap, vent connection with restrictor flap - Comprehensive safety features including overtemperature monitor (TWW), mechanical limiter (TWB), and AutoSAFETY system with visual and audible alarms - AtmoCONTROL software for data logging and program management, with Ethernet interface and USB stick for ease of use - Stainless steel interior reinforced by deep drawn ribbing and large-area heating on four sides for even temperature distribution The Memmert IN260plus Natural Convection Incubator 256L, 115V offers unmatched precision and reliability for temperature-sensitive applications. With a spacious 256 L (9 cu.ft.) stainless steel chamber, this incubator is designed for consistent temperature control, ranging from +20°C to +80°C, with an accuracy of 0.1°C. The advanced ControlCOCKPIT system, featuring a TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller, ensures precise adjustments in temperature, air flap position, and program time, allowing for complete customization. Two Pt100 sensors in a 4-wire circuit provide mutual monitoring for accurate and consistent performance, making this incubator ideal for demanding lab environments. This incubator is equipped with essential safety features such as an overtemperature monitor (TWW), mechanical limiter (TWB), and the AutoSAFETY system, which provides visual and audible alarms for any temperature fluctuations. Additionally, the Memmert IN260plus offers natural convection and electronically adjustable fresh air admixture, enhancing airflow within the chamber. Its stainless steel interior, reinforced with deep-drawn ribbing and four-sided heating, ensures even temperature distribution and easy cleaning, while AtmoCONTROL software facilitates data logging and program management via Ethernet or USB connection. Designed for durability and optimal performance, this incubator is perfect for laboratories requiring precise, high-capacity temperature control. INCLUDED: TheMemmert IN260plus Natural Convection Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-RotorFeatures - Designed to be compact, quiet, and p (more)owerful - Features high speeds up to 15,000 RPM and 21,631 x g - Program storage for up to 99 programs - 10 acceleration and 10 deceleration rates - Timer function up to 99 hours, 59 minutes or continuous operation - Imbalance identification system with automatic shut-off - Maintenance free induction drive - Motor driven safety-lid lock - "K" models feature a powerful CFC-free refrigeration system with a temperature range of -20°C to 40°C - "K" models also feature a pre-cooling function and reaches 4°C from room temperature in less than 10 minutes Features an easy to use control panel with the ability to display RPM/RCF, adjust acceleration/deceleration rates, change alarm tones, and much more The Z216 Series benefits directly from the versatility of 11 available rotor options for tube sizes between 0.2ml and 5ml Despite a remarkably small footprint in the lab, the Z216 series can nearly double the capacity of traditional microcentrifuges Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20C and is designed to reach 4C (from room temperature) in less than 10 minutes. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 MK Refrigerated Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty