KNF SIMDOS 10 IP65 UFEM 1.10 FT.18RC2 Diaphragm Liquid Dosing Pump

The N 820.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products.  The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications.  When the humid gases are sucked in, condensation may form in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Fluid temperature allowed at 5-40°C FFPM valve material PTFE coated diaphragm material Pump head material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This Vacuubrand MZ 2CE Membrane Diaphram Vacuum Pump was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good cosmetic condition with marks from use.

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

VACUUBRAND MD 12 NT Diaphragm Pump Ultimate Vacuum 2 mbar (1.5 Torr) Maximum Pumping Speed 7.1 CFM  (more)at 60Hz Number of Heads/Stages 8/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Reduced process times - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs The MD 12 NT diaphragm pump is an especially powerful pump for oil-free evacuation and pumping of non-aggressive gases. The three-stage design of this eight-cylinder pump provides the advantageous combination of very high pumping speed and excellent ultimate vacuum. The flow path consists of aluminum, stainless steel and carefully selected plastics to permit a wide range of applications. The fabric-reinforced double diaphragms are made of highly flexible FKM for extended operating life and high vacuum performance. Eight-cylinder NT pumps feature quiet operation, with smooth and easy-to-clean surfaces. Like all VACUUBRAND diaphragm pumps they operate absolutely oil-free and do not have any sliding components in the gas path. In normal operation they are completely free of abrasion. This eliminates most of the particulate impurities frequently generated inside of scroll or piston pumps. The MD 12 NT is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases, especially for applications in physics and analytics. Due to the very good ultimate vacuum the MD 12 NT is often used as an alternative to rotary vane pumps, for example for vacuum ovens, for very quick and efficient degassing of viscous media, exhaust gas analytics and especially as backing pump for large turbomolecular drag pumps. The particularly high pumping speed enables the usage of bigger vacuum apparatus and with high gas throughput. The pump is extraordinarily silent and exhibits very low vibration making it an excellent choice for sensitive equipment such as electron microscopes. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. INCLUDED: The VACUUBRAND MD 12 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump Ultimate Vacuum 99 mbar Maximum Flow Rate 110L/min (6.6 m (more) 3/h) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm Features: - Recommended for standard  (more)applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm includes: - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA ROTAVISC SBS hi-vi II HELI Complete Viscosity Measuring Range 40000000 mPas Speed Range 0.01 -  (more)200 rpm Working Temperature -100 - 300 °C Features - Special steel ball bearing technology enhances durability for high throughput and frequent spindle changes. - Measures viscosity up to 40,000,000 mPas with +/- 1% accuracy and +/- 0.2% repeatability. - Motorized IKA HELISTAND and 4.3" TFT display simplify operation and ensure precise measurements. - Adjustable speed from 0.01 to 200 rpm, with temperature measurement and calibration options. - Torque measurement, wide temperature range, RS 232 and USB interfaces for data management. The SBS rotational viscometers, part of the IKA ROTAVISC family, bring advanced steel ball bearing technology to the forefront, offering unmatched durability for laboratories with high sample throughput or harsh conditions. These viscometers achieve precise measurements across a vast viscosity range up to 40,000,000 mPas, ensuring accuracy within +/- 1% and repeatability of +/- 0.2% for both simple and complex fluids. Equipped with a motorized IKA HELISTAND and an intuitive 4.3" TFT display, the device ensures uniform sample testing and easy setup, enhancing the user experience for all viscosity measurement tasks. With features such as adjustable speed, comprehensive temperature control, and extensive connectivity options, the SBS series stands out for its versatility and precision in demanding laboratory environments.INCLUDED: The IKA ROTAVISC SBS hi-vi II HELI Complete includes: - ROTAVISC SBS me-vi control - HELISTAND - T-SP-SET - SP set-2 - PT 100.8 - Guard rail - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

KNF IP65 UFEM 1.10 TT.18S2 Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The UFEM 1.10 ST.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1– 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. The KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump is brand new in box . Includes a 1 Year Full Parts and Labor Warranty. KNF IP65 UFEM 1.10 TT.18S2 Liquid Pump SpecificationsWeight2 lbs., 0.9kgConnection Tubing ID1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°CPermissible Liquid Media Temp Range5 - 80°CPump HeadPVDFDiaphragmPTFE coveredValvesFFKMDimensions (L x W x H)5.9 x 5.7 x 3.7in (150 x 144 x 93mm)Maximum Suction9.8 ft of waterMaximum Pressure85 psig, 6 barPower Consumption24WLiquid Flow Rate1-100 ml/minLiquid Dosing Volume1-999 mlFunctionsManual Operation (S Version)Electrical100 – 240VComparison of ModelsSpecificationKNF IP65 UFEM 1.10 FT.18RCP2KNF IP65 UFEM 1.10 FT.18S2KNF IP65 UFEM 1.10 KT.18RCP2KNF IP65 UFEM 1.10 KT.18S2KNF IP65 UFEM 1.10 ST.18RCP2KNF IP65 UFEM 1.10 ST.18S2KNF IP65 UFEM 1.10 TT.18RCP2KNF IP65 UFEM 1.10 TT.18S2Connection Tubing¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4 mm)1/8 OD x 1/16 ID in.¼ OD x 1/8 ID in (6 x 4mm)1/8 OD x 1/16 ID in.Permissible Gas and Ambient Temp Range5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°C5 - 40°CPermissible Liquid Media Temp Range5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°C5 - 80°CPump HeadPTFEPTFEPPPTFEStainless SteelStainless SteelPVDFPVDFValvesFFKMFFKMFFKMFFKMFFKMFFKMFFKMFFKMLiquid Flow Rate1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/min1-100 ml/minLiquid Dosing Volume1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 ml1-999 mlFunctionsN/AN/AN/AManual Operation (S Version)N/AManual Operation (S Version)N/AManual Operation (S Version).comparison-table tr td:nth-child(9) { background-color: #fffacd; }

IKA KS 4000i Incubator Shaker Type of Movement Orbital Heating Temp. Range Room Temp. +5° - 80 °C Sp (more)eed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This innovative incubator shaker offers unattended operation in a controlled environment, featuring a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control using dual PT 1000 sensors. It includes an electronic temperature and speed control, a timer switch for up to 999 hours, and an optional built-in cooler for external cooling unit connection. Safety features include automatic shutoff when disturbed or when the hood is lifted. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a heating temperature range from room temperature +5°C to 80°C, this unit ensures precise and reliable operation for various laboratory applications.