KNF N860.3FT.40.18 IP54-T Diaphragm Pump

This Edwards High Vacuum Pump 2 Two Stage  Model: E2M2 was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and the suction was tested with a vacuum gauge (not included). It seems to be drawing suction well, but will likely need a service. It is in good cosmetic condition with some marks from use.

Edwards nEXT400T HC - ISO160 160W Turbomolecular Pump Ultimate Vacuum 1x10-8 mbar Inlet Connection D (more)NISO160-K Pumping Speed Nominal 2399.99 l/min Features - Combines oil-lubricated ceramic lower bearing with a dry permanent magnetic upper bearing for enhanced performance - Features built-in electronics for easy integration with TAG and TIC controllers - Allows for in-field oil and bearing cartridge changes with minimal tools - Provides high speeds and compression with advanced simulation-derived designs - Features a patented bearing suspension system to minimize noise and vibration - Ensures a clean vacuum with a permanent magnet upper bearing - Suitable for research, high-energy physics, mass spectrometry, and industrial applications - Designed for long-term reliability and minimal maintenance needs nEXT turbomolecular pumps are hybrid bearing pumps with integrated controllers for pumping speeds from 47 to 1250 ls-1.The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V DC sensorless motors with a built-in drive that is fully compatible with our range of TAG and TIC controllers.INCLUDED: The Edwards nEXT300T HC - CF100 160W Turbomolecular Pump includes: - Power Cord - One Year Manufacturer's Warranty

Edwards nXDS15iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS15iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS15iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Programmable flow rate: 0.00 to 5.00 mL/min, 0.01 mL/min increments Maximum operating pressure: 401  (more)bar Pressure ripple: <2% at 0.5mL/min Flow precision: 2 seconds SD Flow accuracy: 2% of setting Gradient accuracy: <1% between 10 to 90% Gradient precisison: <0.5% RSD between 10 to 90% Gradient delay volume: <60 µL (without mixer), <200 µL (with one 50 µL mixer) Inline degasser channels: 2 Dimensions (HxDxW): 430 x 610 x 305 mm Weight: 27.2 kg

220-240V, 50-60 Hz, 16W

Double-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory appl (more)ications. For conveying and evacuating, without affecting the media. • 100% oil-free transfer, so that the media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapours and condensates • Suitable for slightly aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 34 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar Dimensions (DxHxW): 341 x 226 x 166 mm Weight: 12 kg

This item has just arrived in our stock. Please enquire for further details.

Polyscience AD28S150-A11B 28L Stainless Steel Open Bath, Advanced Digital (Ambient +10 to 150C), 120 (more)V, 60HzThe Polyscience AD28S150-A11B 28L Stainless Steel Open Bath is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A &amp; B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD28S150-A11B 28L Stainless Steel Open Bath, Advanced Digital (Ambient +10 to 150C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MARSHALL Select MS-P200UL Pipette, 20-200ul Volume Range 20 to 200ul Adjustable or Fixed Volume Adj (more)ustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P200UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 20 to 200ul with fine increments of 1ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P200UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P200UL Pipette, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 50 g) Wooden box Number of piec (more)es in the set: 8 weights 1 g i 2 g &ndash; solid masses without adjusting chamber