KNF IP65 FEM 1.02 KT.18RCP Liquid Pump

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dionex P580A Low Pressure Gradient Degassing Pump This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D8B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is included. It is in good cosmetic condition with some marks from use.

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

SARTORIUS QS4000 Precision Balance 4000g / 0.2g Laboratory Balance QS 4000 Weighing capacity: 4000g  (more)(4kg) Readability: 0.1 g Linearity: ± 0.1 g Weighing pan dimensions: 26 x 21 cm Tested at 1g / 1kg / 4kg In good condition

This Nuaire Labgard Class II Biological Safety Cabinet NU-437-400E  Series 6 was removed from a (more) university lab where it was surplus to requirements. The item powers on with blowers and both Light & UV working. The blower will only work when the sash is at the correct working height. This is marked on the side of the unit. When it is dropped fully the blower switches off as it should. When it is raised above the mark the windows alarm goes off as it should, until the sash is dropped back to the correct working height. The unit starts up as it should and shows 'low' airflow initially until it builds up to the correct flow. It then raises above the correct flow and the 'HI' alarm sounds. We spoke to a service engineer and they suggested that it will just require calibrating upon installation. It will need commissioning upon installation anyway. The lab reported that the filter has been removed. Inside dimensions - D57.5 W118 H72cm

This Edwards E306A Thermal Evaporator Coating System was removed from a university lab where it was  (more)surplus to requirements. The system powers up but we were unable to test it further at our facility. It is made up of the following modules; 1 x Edwards No.8 High Vacuum Pump Model E2M8.1 x Edwards PR10-K.1 x Edwards Vacuum Switch Type VSK 1.B.1 x Edwards Vapour Pump Model EO4. It is in good cosmetic condition but has marks from use. No key supplied with the Item for the bottom panels.

Memmert HPP750eco Climate Chamber 749L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 749 L (26.5 cu. ft.) Features - Large 749 L (26.5 cu. ft.) chamber capacity ideal for extensive sample storage - Temperature range with humidity from +5 to +70°C, ensuring precise control for sensitive samples - Accurate to 0.1°C with dual Pt100 sensors for reliable temperature monitoring and control - Humidity range adjustable from 10% to 90% RH, utilizing an external distilled water tank - Efficient humidification via hot steam generator and Peltier-based dehumidification - TwinDISPLAY ControlCOCKPIT with dual high-definition TFT displays and multi-language support - Comprehensive safety with AutoSAFETY system and dual over/undertemperature alarms - Program and manage settings with AtmoCONTROL software via USB or Ethernet The Memmert HPP750eco Climate Chamber 749L, 115V, offers expansive capacity and precise environmental control for research and laboratory needs. With a temperature range from +5 to +70°C with humidity, and 0 to +70°C without, this climate chamber is equipped to maintain stable and consistent conditions. Humidity can be adjusted from 10% to 90% RH, using a hot steam generator for efficient humidification and Peltier technology for energy-saving dehumidification. The chamber's 0.1°C temperature accuracy and dual Pt100 sensors ensure reliability for even the most sensitive samples, providing the highest standards in environmental consistency. This climate chamber offers advanced functionality with Memmert’s TwinDISPLAY ControlCOCKPIT, featuring intuitive dual TFT displays and multi-language support. The system’s AutoSAFETY feature integrates automatic over- and undertemperature protection with alarms, making it ideal for applications requiring uninterrupted monitoring. With programmable settings and calibration via AtmoCONTROL software, the HPP750eco enables seamless data management through USB or Ethernet. Built with durable, scratch-resistant stainless steel and equipped with lockable castors for easy mobility, this unit is both robust and practical for demanding lab environments. INCLUDED: TheMemmert HPP750eco Climate Chamber 749L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty