Desaga KP2000 E Kolbenpumpe Piston Pump Volume 2x 1.0 ml Sarstedt

Buchi Rotavapor R-300 System w/ V-300 Pump & F-305 Chiller Lab This equipment is being sold on b (more)ehalf of an operational laboratory. The system was in good working order when it was last in use. It is in good cosmetic condition with only minor marks from use. The unit can be collected from the client in Italy, with the option of delivery for an additional fee. The system includes: - Buchi Rotavapor R-300 - Buchi F-305 Chiller - Buchi V-300 Pump - 0.5L Flask - 3L Flask The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

KNF Neuberger NO35AN.18 Diaphragm Vacuum Pump This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and runs but has not been tested further. It is in good cosmetic condition with minor marks.

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Rotavac Vario Pumping Unit, 115VFully controllable stand-alone pumping unit including vacuu (more)m controller. For use with For Hei-VAP Value and Hei-VAP Advantage rotavapor models. The precise vacuum control prevents bumping and loss of your samples. Thanks to the automatic vacuum supply to the process parameters, you have more time for important laboratory activities. Condenser is not in scope of delivery. Features: - Highest distillation rates possible and reducing process time by 30 % - Solvent recovery of up to 99 % - Once the required vacuum is reached, the pump automatically stops and reliably keeps the vacuum at the desired level - Minimized runtime saves energy and significantly increases the lifespan of the diaphragm - These pumps guarantee minimum noise and vibrations during operation - Rpm-regulated pumps achieve the most precise vacuum INCLUDED: The Heidolph Rotavac Vario Pumping Unit, 115V includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Vacuum pump KNF N035.3 AN.18 Final pressure/ultimate vacuum reading (abs.) (mbar): 127 mbar (see pho (more)to) Technical specifications: Voltage: 230 V, 50 Hz Current: 1.8 A Power: 150 W Pump flow rate: 30 l / min Equipment tested

Technical features Flow rate: 0.03-20ml / min Programmable dosage: from 0-999 ml Suction height (max (more).): 2 mWg Operating pressure (max.): 6 bar (rel.) Weight 0.9 kg Permitted fluid temperature: 5-80°C Permitted ambient temperature: 5-40°C Valve material: Kalrez® FFKM Membrane material: PTFE coating, FFKM Pump head material: PTFE, PP, Stainless steel, PVDF Applications Liquid dosing / measuring Qualitative characteristics Small footprint Simple and intuitive use Manual and analog control and RS232 interface Self-priming, it can run dry Constant and reliable flow rate Available with different material configurations for chemical resistance Simple calibration Pump head materials: PP, PVDF, PTFE Membrane materials PTFE coating, FFKM Valve material: FFKM Kalrez Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Digital Instruments Signal Access Module lll was removed from a university lab where it was sur (more)plus to requirements. The lab confirmed the unit was working when last used, but it has not been tested at our facility. It is in reasonably good cosmetic condition but has some marks from use. System comprises; 6 x pairs low voltage inputs to the nanoscope controller (data signal)12 x pairs low voltage inputs from the nanoscope controller (control signals)6 x pairs of high voltage outputs from the nanoscope controller (piezo drive signals)6 x pairs of inputs to the sensor4 x pairs outputs from the sensor2 x ports to microscope controller1 x port to microscope1 x port to sensor

Motic AE2000 LED Trinocular Inverted Microscope w/ Moticam BMH4000X Microscope Camera Objectives CCI (more)S® Plan Achromatic, DIN 4X, PH10X Fine Focus Precision Color Corrected Infinity Optical System (CCIS®) Transmitted Illumination (FPS) Quartz Halogen 6V/30W with Intensity Control Features - Color Corrected Infinity Optical System (CCIS®) for excellent image quality - Iris diaphragm for precise light control - Sturdy stage with metal and glass inserts for stable sample placement - Supports brightfield and phase contrast with a phase slider - Inverted stand suitable for routine microbiology and cell cultures - 8MP sensor for detailed and clear images - Features auto/manual exposure, white balance, saturation, contrast, and more

Memmert IN75 Natural Convection Incubator 74L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 74 L Features - 74 L (3 cu.ft.) capacity for versatile sample accommodation and efficient use of space - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Display resolution of 0.1°C for both set point and actual values - Adjustable parameters including temperature (Celsius or Fahrenheit), air flap position, and program time - SetpointWAIT function ensures process time starts only once set temperature is reached - Calibration with three selectable temperature values for precise adjustments - Language options: German, English, Spanish, and French - Stainless steel interior with a max chamber load of 264 lbs, resistant to corrosion and easy to clean - Autodiagnostic system and overtemperature monitor for enhanced safety The Memmert IN75 Natural Convection Incubator 74L, 115V is designed to provide precise temperature control and reliable performance for low-temperature applications. With a spacious 74 L (3 cu.ft.) capacity, this incubator offers versatile sample accommodation and even heat distribution through its natural convection system. Equipped with a Pt100 sensor in a 4-wire circuit, the IN75 maintains temperature accuracy to 0.1°C, managed through a SingleDISPLAY digital PID-microprocessor controller. Additional features include AtmoCONTROL software, allowing efficient data management and programming via Ethernet, and an autodiagnostic system with an overtemperature monitor for enhanced safety. Its easy-to-clean stainless steel interior and robust design make it ideal for rigorous lab environments. INCLUDED: The Memmert IN75 Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.