Agilent / Pfeiffer turbo pump used with series 5975, systems 5975B, 5975C and 5975C-TAD

Edwards iQDP80 Dry Vacuum Pump This item was removed from a university where it was surplus to requi (more)rement. It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair. Serial No.: M109880Model: 3XIQDP80Manufacturing Date: 21.11.00 Power supply cable & control module not included.

3/4" QuattroFlow QF12IES Pump Head Chamber for QF1200 & QuattroFlow Service Kit This was removed (more) from a university lab where it was surplus to requirements. It has not been tested. Included are; 3/4" QuattroFlow QF12IES Pump Head ChamberPart#: QF12IESSerial#: 673786 Item is in good cosmetic condition with no damage. QuattroFlow Service KitContents are unnamedAll contents shown in images.

Gast Vacuum Pump Model 0523-V125Q-G588DX This was removed from a university lab where it was surplus (more) to requirements. The unit has not been tested as it has not been wired up. It is in good cosmetic condition with minor marks.

Edwards nXDS6iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Unlike the standard nXDS6i, the Edwards nXDS6iR is designedfor specialist applications such as gas recirculation, rare gas pumping andrecovery or other applications where the dilution of the pumped gas isundesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS6iR Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS6iR Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement6.2 m3h-1 / 3.6 ft3min-1Peak pumping speed6.2 m3h-1 / 3.6 ft3min-1Ultimate vacuum (total pressure)0.020 mbar / 0.015 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed4.1Maximum continuous inlet pressure200 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight26.2 kg / 58 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iREdwards nXDS10iREdwards nXDS15iREdwards nXDS20iRNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Edwards XDS46i Dry Scroll Pump Ultimate Vacuum 5 x 10-2 mbar Inlet Connection NW40 Displacement 60 m (more) 3h-1 / 35 ft3min-1 Features - XDS scroll pumps provide dry, clean vacuum solutions, setting the standard for robust and efficient performance - Isolates the vacuum environment from all forms of lubricant, ensuring a hermetically sealed operation that prevents contamination - Offers a displacement of 60 m³/h and a peak pumping speed of 40 m³/h, ensuring high performance in demanding environments - Capable of handling maximum continuous inlet pressure of 40 mbar (30 Torr) and maximum continuous outlet pressure of 0.2 bar gauge - With a weight of 48 kg (105 lbs) and a noise level of 55.4 dB(A), it operates quietly and efficiently within a temperature range of 10 to 40 °C - Ensures reliability with a leak tightness of <1 x 10⁻⁶ mbar ls⁻¹ - Equipped with NW40 inlet flange and NW25 exhaust flange for easy integration into various systems XDS scroll pumps have become industry standard when dry pumping is essential, proving to be a robust and clean vacuum pump solution in a range of applications and processes. The XDS35i pump has an innovative bearing shield that isolates the vacuum environment from all forms of lubricant, making it not only lubricant-free but hermetically sealed. XDS35iNGB variant has had the gas ballast feature removed for applications such as rare gas recirculation and gas recovery. The XDS46i shares many of the same features of the XDS35i but with a peak speed of 40 m3h-1. The pump has been optimised for maximum pumping speed at inlet pressures between 1 mbar and 10 mbar, making it ideally suited for LCMS and ICPMS applications requiring higher pumping speeds. The C variant has been modified so that it is more suitable for use on vapour handling processes and may be used in some applications using corrosive substances. The C version is fitted with Chemraz® internal valve pads and stainless steel exhaust port.INCLUDED: The Edwards XDS46i Dry Scroll Pump includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis This was removed from a un (more)iversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

Heidolph Hei-VAP Ultimate ML/G3 Non Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of  (more)rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. Precise setting of rotation speed and heating bath temperature on the digital touch display or – for quick access during an active process – directly via the knobs on the operating panel. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 7" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Ultimate ML/G3 Non Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Dimensions (WxHxD): 600 x 650 x 500 mm

Vacuum systems are widely used for the aspiration and disposal of liquid waste, for instance, when r (more)emoving media from cell cultures, supernatant after centrifugation, and wash solutions from immunoassay well plates. The aspiration of waste liquids is a routine yet time-consuming task. The user-friendly VACUSAFE system streamlines this repetitive workflow, freeing up lab personnel to perform other vital tasks. It also provides a secure alternative to do-it-yourself liquid waste disposal systems typically found in laboratories, protecting operators from exposure to liquids and aerosols for a safer working environment. The system additionally features optional liquid level detection to prevent overfilling, and a filter to protect the vacuum source from contamination. Vacuum range: -300 to -600 mbar (adjustable) Pump flow rate: 8 l/min (air) Liquid aspiration rate: 17 ml/s (aspiration pipet) Noise emission: <50 dB(A) at 1 m Dimensions (HxWxD): 530 x 180 x 320 mm Weight: 3.4 kg