Pipettes

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA microbalance. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 11 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson PIPETMAN Classic P2 PipetteThe PIPETMAN® Classic line is one of the world standards in pipett (more)ing and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic line is available in eight single channel models covering a range of volumes from 0.2µL to 10 mL. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting. Routine cleaning and maintenance are all that is required to keep PIPETMAN Classic in top condition for years. The PIPETMAN Classic design allows for easy access to user-serviceable parts, along with a fully autoclavable tip holder and ejector. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN Classic P2 Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson PIPETMAN Classic P2 Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range0.2 - 2 µLPipette ModelP2Pipette RangePIPETMAN ClassicNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachWarranty3 YearsRequest a Formal Quote

Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000GThe PIPETMAN G 4-Pipette Kit p (more)rovides four pipettes covering volume transfers from 0.2 ul to 1000 ul, which will tackle most laboratory needs. With a redesigned piston assembly, the PIPETMAN G pipettes feature extremely low pipetting forces, improving comfort and minimizing injury, all while maintaining the durability, accuracy, and reliability of the original PIPETMAN series. Premium Pipetting ComfortWith a new seal and lighter springs, the new piston assembly of the PIPETMAN G pipettes significantly reduces the force needed to aspirate and dispense liquids. This benefit is especially helpful during extended pipetting sessions and alleviates common hand stresses caused by repetitive actions.FlexiblePIPETMAN G pipettes come with a durable stainless steel tip ejector, which is ideal for most situations. Plastic tip ejectors are available separately and are recommended for working with corrosive substances. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Starter Kit, 4 Pipette Kit, P2G, P20G, P200G, P1000G includes: - Four PIPETMAN G Pipettes: P2G, P20G, P200G, and P1000G - Three Racks of PIPETMAN DIAMOND Tips (Models: D10L, D200 and D1000) - Four SINGLE Pipette Holders - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Gilson Microman M1000E Pipette, 100-1000ul The ergonomically designed MICROMAN® E positive displacem (more)ent pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: Viscous solutions—difficult to aspirate and stick to pipette tips. Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. Cold liquids—delivered in excess amounts. Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M1000 Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

Scilogex SCI-Fill Motorized Pipette Controller, 110-220V Aspiration Speed 25mL<7s (8 shift) Dispe (more)nsing Speed Motor (8 shift)/Gravity Charging Times 2-3 Hours Features - Easy switch between motor and gravity dispensing - LED display showing battery level and adjustable coarse speed - 8 levels of coarse speeds - Touch-sensitive triggers for fine speed control - 8 hours of continuous use per charge - Lightweight, ergonomic design - Wall mount and bench top controller stand - Zero downtime, use while charging SCILOGEX SCI-Fill Motorized Pipette Controller. Rugged, reliable, easy liquid handling in BSC and new lab benches. Including wall/bench stand and 2 x 0.45um filters. Switch parts with zero tools. The trigger buttons on the Sci-Fill are concave and touch-sensitive, so the pipette controller feels nice in your hands while giving you the fine control you need for delicate tasks. Every battery charge gives you 8 hours of continuous motorizing aspirating and dispensing. The pipette gun still does its job while charging, so there’s no downtime. INCLUDED: The Scilogex SCI-Fill Motorized Pipette Controller, 110-220V includes: - Mountable Wall Holder - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Pette Vario 20 - 200ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 20 - 200ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 20 - 200ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range20 - 200 µlIncrements0.2 µlAccuracy (Nominal Volume µl / %) ± 1.2 µl / 0.6%Precision (Nominal Volume µl / %)± 0.4 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 1 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.3 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.5 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.14 µl / 0.7%

IKA Pette Vario 2 - 20ul Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 2 - 20ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 2 - 20ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range2 - 20 µlIncrements0.02 µlAccuracy (Nominal Volume µl / %) ± 0.2 µl / 1%Precision (Nominal Volume µl / %)± 0.06 µl / 0.3%Accuracy (50% of Nominal Volume µl / %)± 0.12 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 0.06 µl / 0.6%Accuracy (10% of Nominal Volume µl / %)± 0.1 µl / 5%Precision (10% of Nominal Volume µl / %)± 0.03 µl / 1.5%

IKA Pette Vario 100 - 1000ul Pipette Features - Improved ergonomics as a result of replaceable hand (more)les ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 100 - 1000ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 100 - 1000ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range100 - 1000 µlIncrements1 µlAccuracy (Nominal Volume µl / %) ± 6 µl / 0.6%Precision (Nominal Volume µl / %)± 2 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 5 µl / 1%Precision (50% of Nominal Volume µl / %)± 1 µl / 0.2%Accuracy (10% of Nominal Volume µl / %)± 3 µl / 3%Precision (10% of Nominal Volume µl / %)± 0.6 µl / 0.6%

IKA Pette Vario 10 - 100ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 10 - 100ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 10 - 100ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range10 - 100 µlIncrements0.1 µlAccuracy (Nominal Volume µl / %) ± 0.8 µl / 0.8%Precision (Nominal Volume µl / %)± 0.2 µl / 0.2%Accuracy (50% of Nominal Volume µl / %)± 0.5 µl / 1%Precision (50% of Nominal Volume µl / %)± 0.15 µl / 0.3%Accuracy (10% of Nominal Volume µl / %)± 0.3 µl / 3%Precision (10% of Nominal Volume µl / %)± 0.1 µl / 1%

IKA Pette Vario 1 - 10ml Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 1 - 10ml Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 1 - 10ml Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range1 - 10mlIncrements10 µlAccuracy (Nominal Volume µl / %) ± 60 µl / 0.6%Precision (Nominal Volume µl / %)± 15 µl / 0.15%Accuracy (50% of Nominal Volume µl / %)± 40 µl / 0.8%Precision (50% of Nominal Volume µl / %)± 10 µl / 0.2%Accuracy (10% of Nominal Volume µl / %)± 30 µl / 3%Precision (10% of Nominal Volume µl / %)± 6 µl / 0.6%

IKA Pette Vario 0.5 - 5ml Pipette Features - Improved ergonomics as a result of replaceable handles (more) ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.5 - 5ml Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.5 - 5ml Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.5 - 5mlIncrements5 µlAccuracy (Nominal Volume µl / %) ± 30 µl / 0.6%Precision (Nominal Volume µl / %)± 7.5 µl / 0.15%Accuracy (50% of Nominal Volume µl / %)± 30 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 6.25 µl / 0.25%Accuracy (10% of Nominal Volume µl / %)± 12 µl / 2.4%Precision (10% of Nominal Volume µl / %)± 3 µl / 0.6%

IKA Pette Vario 0.5 - 10ul Pipette Features - Improved ergonomics as a result of replaceable handle (more)s ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.5 - 10ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.5 - 10ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.5 - 10 µlIncrements0.01 µlAccuracy (Nominal Volume µl / %) ± 0.1 µl / 1.0%Precision (Nominal Volume µl / %)± 0.04 µl / 0.4%Accuracy (50% of Nominal Volume µl / %)± 0.075 µl / 1.5%Precision (50% of Nominal Volume µl / %)± 0.04 µl / 0.8%Accuracy (10% of Nominal Volume µl / %)± 0.025 µl / 2.5%Precision (10% of Nominal Volume µl / %)± 0.018 µl / 1.8%

IKA Pette Vario 0.1 - 2ul Pipette Features - Improved ergonomics as a result of replaceable handles (more) ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.1 - 2ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.1 - 2ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.1 - 2µlIncrements0.002 µlAccuracy (Nominal Volume µl / %) ± 0.028 µl / 1.4%Precision (Nominal Volume µl / %)± 0.014 µl / 0.7%Accuracy (50% of Nominal Volume µl / %)± 0.025 µl / 2.5%Precision (50% of Nominal Volume µl / %)± 0.015 µl / 1.5%Accuracy (10% of Nominal Volume µl / %)± 0.024 µl / 12%Precision (10% of Nominal Volume µl / %)± 0.012 µl / 6%

IKA PETTE MacroKit Vario: 100-1000 ul, 0.5-5 ml, 1-10ml, Linea Stand, Tip m box, Tip l box, Tip xl b (more)ox Design Air Displacement Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MacroKit pipette package covers a volume range of 100 - 10,000 µl, ideal for laboratories that are working in the milliliter volume range. The package consists of three single channel pipettes with variable volumes in the macro-volume range, a complimentary stand that holds up to three pipettes and three pipette tip boxes. This makes it a convenient starter package for researchers.INCLUDED: The IKA PETTE MacroKit Vario: 100-1000 ul, 0.5-5 ml, 1-10ml, Linea Stand, Tip m box, Tip l box, Tip xl box includes: - IKA PETTE vario 100-1000 µl - IKA PETTE vario 0.5 - 5 ml - IKA PETTE vario 1-10 ml - IKA Linea - IKA Tip m box (96 tips) - IKA Tip l box (50 tips) - IKA Tip xl box (25 tips) - Two Year Manufacturer's Warranty

Gilson PIPETMAN PipetteFeatures - Made of PVDF and stainless steel, PIPETMAN offers premium durabili (more)ty - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - 3 Year Manufacturer's Warranty

Gilson Pipetman Neo P8x200 Multichannel PipetteFeatures - Redesigned tip ejector and ejection spring (more)s reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo 8x200 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P8x200 Multichannel Pipette Specifications Model8x200 Cat # F14403Volume (ul)20100200Max. Permissible Systemic Error (ul)± 0.50± 1.00± 2.00Max. Permissible Random Error (ul)≤ 0.25≤ 0.40≤ 0.60Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul) 22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul) ≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Gilson Pipetman Neo P2N PipetteFeatures - Redesigned tip ejector and ejection springs reduces tip ej (more)ection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo P2N Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P2N Pipette Specifications ModelP2N Cat # F144561 Volume (ul)0.2 0.52Max. Permissible Systemic Error (ul)± 0.024± 0.025± 0.030Max. Permissible Random Error (ul)≤ 0.012≤ 0.012≤ 0.014Comparison of Neo PipettesP2NP10NP20NP100NP200NP1000NVolume (ul)0.2 0.5 21 5 102 10 2010 50 10020 100 200100 500 1000Max. Permissible Systemic Error (ul)± 0.024 ± 0.025 ± 0.030± 0.025 ± 0.075 ± 0.100± 0.10 ± 0.10 ± 0.20± 0.35 ± 0.40 ± 0.80± 0.50 ± 0.80 ± 1.60± 3.0 ± 4.0 ± 8.0Max. Permissible Random Error (ul)≤ 0.012 ≤ 0.012 ≤ 0.014≤ 0.012 ≤ 0.030 ≤ 0.040≤ 0.030 ≤ 0.050 ≤ 0.060≤ 0.10 ≤ 0.12 ≤ 0.15≤ 0.20 ≤ 0.25 ≤ 0.30≤ 0.6 ≤ 1.0 ≤ 1.5.comparison-table tr td:nth-child(2) { background-color: #fffacd;}

Gilson Pipetman Neo P20N PipetteFeatures - Redesigned tip ejector and ejection springs reduces tip e (more)jection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo P20N Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P20N Pipette SpecificationsModelP20NCat # F144563 Volume (ul)2 1020Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.20Max. Permissible Random Error (ul)≤ 0.030≤ 0.050≤ 0.060Comparison of Neo PipettesP2NP10NP20NP100NP200NP1000NVolume (ul)0.2 0.5 21 5 102 10 2010 50 10020 100 200100 500 1000Max. Permissible Systemic Error (ul)± 0.024 ± 0.025 ± 0.030± 0.025 ± 0.075 ± 0.100± 0.10 ± 0.10 ± 0.20± 0.35 ± 0.40 ± 0.80± 0.50 ± 0.80 ± 1.60± 3.0 ± 4.0 ± 8.0Max. Permissible Random Error (ul)≤ 0.012 ≤ 0.012 ≤ 0.014≤ 0.012 ≤ 0.030 ≤ 0.040≤ 0.030 ≤ 0.050 ≤ 0.060≤ 0.10 ≤ 0.12 ≤ 0.15≤ 0.20 ≤ 0.25 ≤ 0.30≤ 0.6 ≤ 1.0 ≤ 1.5.comparison-table tr td:nth-child(4) { background-color: #fffacd;}

Gilson Pipetman Neo P100N PipetteFeatures - Redesigned tip ejector and ejection springs reduces tip  (more)ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo P100N Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo P100N Pipette Specifications ModelP100N Cat # F144564 Volume (ul)1050100Max. Permissible Systemic Error (ul)± 0.35± 0.40± 0.80Max. Permissible Random Error (ul)≤ 0.10≤ 0.12≤ 0.15Comparison of Neo PipettesP2NP10NP20NP100NP200NP1000NVolume (ul)0.2 0.5 21 5 102 10 2010 50 10020 100 200100 500 1000Max. Permissible Systemic Error (ul)± 0.024 ± 0.025 ± 0.030± 0.025 ± 0.075 ± 0.100± 0.10 ± 0.10 ± 0.20± 0.35 ± 0.40 ± 0.80± 0.50 ± 0.80 ± 1.60± 3.0 ± 4.0 ± 8.0Max. Permissible Random Error (ul)≤ 0.012 ≤ 0.012 ≤ 0.014≤ 0.012 ≤ 0.030 ≤ 0.040≤ 0.030 ≤ 0.050 ≤ 0.060≤ 0.10 ≤ 0.12 ≤ 0.15≤ 0.20 ≤ 0.25 ≤ 0.30≤ 0.6 ≤ 1.0 ≤ 1.5.comparison-table tr td:nth-child(5) { background-color: #fffacd;}

Gilson Pipetman Neo 12x200 Multichannel PipetteFeatures - Redesigned tip ejector and ejection spring (more)s reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. INCLUDED: The Gilson Pipetman Neo 12x200 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo 12x200 Multichannel Pipette Specifications Model12x200 Cat # F14404Volume (ul)20100200Max. Permissible Systemic Error (ul)± 0.50± 1.00± 2.00Max. Permissible Random Error (ul)≤ 0.25≤ 0.40≤ 0.60Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul) 22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul) ≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Gilson Pipetman Neo 12x20 Multichannel PipetteFeatures - Redesigned tip ejector and ejection springs (more) reduces tip ejection forces - Unique clip ejector fits securely into the body of the pipette to avoid slipping over time - PVDF handle limits the transfer of heat from hand to the pipette and is resistant to aggressive chemicals - Stainless steel tip ejector resists corrosion and offers a smooth tip ejection stroke - Color-coded push-button for ease of identification - Unique tip holder allows for a secure fit of most brands of tip - Models P2N and P10N incorporate dual position tip ejectors, allowing the use of D10 (short) and DL10 (long) Quick and user-friendly maintenance allows for less downtime and longer product lifetime With pipettes ranging from 0.2µL up to 10mL, the Gilson Neo line has you covered Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Neo offers uncontested durability and reliability. PIPETMAN Neo is performance and precision exemplified. It provides all the benefits that built the reputation of the legendary PIPETMAN Classic, with the added bonus of increased comfort. Easy to use, you will especially appreciate the smoothness of the piston stroke. With uncontested reliability and durability, PIPETMAN Neo is the economical solution to years of pipetting comfort. PIPETMAN Neo is the new comfortable generation of the PIPETMAN Classic that minimizes required pipetting forces for smooth and easy daily use. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson Pipetman Neo 12x20 Multichannel Pipette includes: - Operator's Guide - 1 Year Manufacturer Warranty Gilson Pipetman Neo 12x20 Multichannel Pipette SpecificationsModel12x20Cat # F14402Volume (ul)21020Max. Permissible Systemic Error (ul)± 0.10± 0.20± 0.40Max. Permissible Random Error (ul)≤ 0.08≤ 0.10≤ 0.20Comparison of ModelsSpecificationsGilson Pipetman Neo 8x20Gilson Pipetman Neo 12x20Gilson Pipetman Neo P8x200Gilson Pipetman Neo 12x200Volume (ul)22202010101001002020200200Max. Permissible Systemic Error (ul)± 0.10± 0.10± 0.50± 0.50± 0.20± 0.20± 1.00± 1.00± 0.40± 0.40± 2.00± 2.00Max. Permissible Random Error (ul)≤ 0.08≤ 0.08≤ 0.25≤ 0.25≤ 0.10≤ 0.10≤ 0.40≤ 0.40≤ 0.20≤ 0.20≤ 0.60≤ 0.60.comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Gilson PIPETMAN M P5000M BT Connected, 500-5000uL Pipette Volume Range 500-5000uL Adjustable or Fixe (more)d Volume Adjustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P5000M BT Connected, 500-5000uL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson PIPETMAN M P300M BT Connected, 20-300uL Pipette Volume Range 20-300uL Adjustable or Fixed Vol (more)ume Adjustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P300M BT Connected, 20-300uL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson PIPETMAN M P20M BT Connected, 2-20uL Pipette Volume Range 2-20uL Adjustable or Fixed Volume A (more)djustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P20M BT Connected, 2-20uL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty