12-channel pipette 10-100 µL eppendorf Research plus, variable volume

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) The Accuris NextPette Pipette S (more)et includes variable volume 200 ul, 1000 ul, 5 ml, and 10ml pipettes with carousel stand.INCLUDED: The Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) includes: - NextPette 20 to 200ul Pipette - NextPette 100 to 1000ul Pipette - NextPette .5 to 5ml Pipette - NextPette 1 to 10ml Pipette - Carousel Stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul Inaccuracy ± 1.2 to 0.6% Imprecisio (more)n ± 1.0 to 0.6% Compatible Tip Size 200ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Mass comparators of UMA 5 series stand for the highest standard of professional automatic mass compa (more)rators. They provide comparison of 1 mg – 5 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA HS 260 Basic Shaker Type of Movement Reciprocating Speed Range 0 - 300 rpm Shaking stroke 20 mm (more) Features - Compact and flat reciprocal shaker with ideal swivel motion - LED display for precise speed and time adjustment - Supports a maximum shaking weight of 7.5 kg - Accommodates a wide range of attachment combinations for various vessel sizes and shapes (attachments sold separately) - Suitable for both timer (5 - 50 min) and continuous operation The IKA HS 260 Basic Shaker is a compact and versatile reciprocal shaker designed for precise mixing in laboratory settings. Featuring an ideal swivel motion, it can handle up to 7.5 kg of shaking weight, accommodating a wide range of vessel sizes and shapes with various attachment combinations (attachments sold separately). Electronic controls allow for easy adjustment of both speed (0 - 300 rpm) and timer (5 - 50 min), displayed clearly on the LED screen. Whether operating in timer or continuous mode, this shaker delivers reliable performance and is an essential tool for efficient sample agitation and mixing tasks. INCLUDED: The IKA HS 260 Basic Shaker includes: - HS 260 basic - Attachment screws (4x) - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA HS 260 Basic Shaker SpecificationsType of movementreciprocatingShaking stroke20 mmPermissible shaking weight (incl. attachment)7.5 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)20 rpmSpeed range0 - 300 rpmSpeed display LED lineTimer yesTimer display LED lineTime setting range5 - 50 minOperating modetimer and continuous operationDimensions (W x H x D)360 x 100 x 420 mmWeight8.16 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsHS 260 BasicHS 260 Control NOLHS 260 ControlHS 501 DigitalShaking Stroke20 mm20 mm20 mm30 mmPermissible Shaking Weight (incl. attachment)7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W70 WSpeed Range0 - 300 rpm10 - 300 rpm10 - 300 rpm0 - 300 rpmTime Setting Range5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)360 x 100 x 420 mm360 x 100 x 420 mm360 x 100 x 420 mm505 x 120 x 585 mmPermissible Ambient Temperature5 - 50 °C5 - 50 °C5 - 50 °C5 - 50 °CRS 232 InterfaceNoYesYesYesAnalog OutputNoYesYesNoVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }