IKA Ministar 20 Control Overhead Stirrer

IKA Eurostar 40 Digital Overhead Stirrer Speed Range 0/30 to 2,000 RPM Viscosity Max. 30,000 mPas  (more)Stirring Quantity Max. 25 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Universal laboratory stirrer designed for simple stirring tasks for quantities up to 25 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

IKA Eurostar 400 Digital Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 150 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for high viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed within the range of 0/6 – 2000 rpm (two speed ranges) through microprocessor controlled technology. Integrated safety circuits ensure automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft to desired speed is performed and variations are adjusted automatically. This ensures constant speed even with changes in viscosities of the sample.

IKA RW 47 Digital Mechanical Overhead Stirrer Speed Range 69 to 1,560 RPM Viscosity Max. 100,000 mPa (more)s Stirring Quantity Max. 200 l Features - Digital speed display - Infinitely adjustable speed (57 - 1300 rpm) in two speed ranges - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Extremely powerful, mechanically controlled laboratorystirrer designed for highly viscous applications for quantities up to 200 l(H2O). It is suitable for intensive mixing for use in laboratories and pilotplants. The stirrer comes equipped with a protection for overheating of themotor by means of self-locking temperature limiter. Additionally, to securebowls, a stirring shaft protection and clamping fixture are optionallyavailable.

MARSHALL Select MS-OT40LC Overhead Stirrer, 40L Maximum Stirring Quantity 40L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 50,000 mPas Features - High torque output of 60 Ncm ensures effective mixing performance - Features brushless DC motor for longevity and maintenance-free operation - Slow start-up function to prevent spills and splashes during use - LCD display for real-time monitoring of speed and torque - Through-shaft design allows for easy adjustment of the impeller position - RS232 interface for PC control and data transmission - Safety circuits include automatic stop in anti-stall or overload conditions - Visual alarms for overload protection enhance safety during operation - Torque trend display provides real-time information on viscosity changes - Capable of accepting pass-through stirrer rods for versatile setup options - IP21 protection class ensures basic protection against solid objects and dripping water The MARSHALL Select MS-OT40LC Overhead Stirrer is designed to handle stirring capacities up to 40L, making it ideal for extensive laboratory applications. It operates within a speed range of 50 to 2,200 RPM with a high control accuracy of ± 3 RPM, supported by a robust brushless DC motor. The stirrer offers a maximum viscosity handling of 50,000 mPas and a torque output of 60 Ncm, ensuring effective mixing even with thick samples. Equipped with an advanced microprocessor, the MS-OT40LC provides precise speed control and includes features like a slow start-up to prevent spills and a safety circuit for overload conditions, which automatically stops the motor. The MS-OT40LC’s through-shaft design facilitates easy adjustment of the impeller position, enhancing the flexibility and efficiency of mixing operations. The LCD display allows for real-time monitoring of both set and actual speed and torque, ensuring constant performance even as sample viscosities change. Additional features include an RS232 interface for PC control and data transmission, and visual alarms for overload protection. The IP21 protection class signifies basic protection against solid objects and dripping water, making this stirrer a dependable choice for busy laboratory environments. INCLUDED: The MARSHALL Select MS-OT40LC Overhead Stirrer, 40L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

This listing is for a refurbished Laboklav 25B Autoclave Incl. commissioning in UK. (outside the UK (more) is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Packard Cobra II Gamma Counter Model D5010 System Lab This system was removed from a university lab, (more) where it was surplus to requirements. All included units are in good cosmetic condition and powered on. The system is fully functional, and the PC powered on successfully. The software and syringe runners are operational, though the system requests a printer connection. Overall, the system is ready for use and in working order. Also included are the following; 1x Dell Monitor MM/N: E773sS/N: MY-OY1352-47603-4B4-B7T3 9x Syringe type tubes 1x Keyboard PS2 1x Bag of plastic tips 3x Plastic tip holders 5x Plastic lids 2x VGA type cables 2x Power leads 1x Power lead adaptor 2x Metal hook fixtures 2x 2 amp fuses 1x 15 amp fuse 1x Length of plastic tubing 1x bag of of metal hook fixtures 2x Thin wired VGA type connectors 6x Pipe connectors 1x Box of thin glass tubes (x5) 2x Boxes of assorted fixtures and fittings 1x Force Sensor (capteur de force)M/N: ELJ-S045C-35GS/N: R04074 1x Floppy Disc Cobra II Backup

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements. (more) The unit powers up and works, but the door mechanism is broken, and the door will not remain closed. It is sold for spares/repairs.

MSE Mistral 3000i Benchtop Centrifuge This was removed from a university lab where it was surplus to (more) requirements. Although the unit is in good cosmetic condition and powers on, it is unable to run a cycle or reduce temperature. Additionally included: 1 x MSE RotorModel BS4402 7 x Swinging Buckets:Volume: 250ml Bucket Adaptors: 6 x BlueHolds: 12x 5ml Vials 7 x GreyHolds: 4 x 12ml Vials 8 x MSE BrownHolds: 1 x 100ml VIals 1 x Hex Key Locking Bar