Thermo VT6130 M Vacutherm Vakuumtrockenschrank Vacuum Oven 128L 200°C

This SFL (Severn Furnaces ltd) Model - SP1023 Advanced High-Temperature Unit was removed from a univ (more)ersity lab where it was surplus to requirements. It is in reasonably good cosmetic condition with marks from use but has not been tested.

BINDER BF-115 incubator / drying oven with forced convection 100°C Model: BF115 Capacity: 115 liters (more) Temperature range: Room temperature plus 5 °C to 100 °C With forced ventilation Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 73 kg Tested at 37°C Year of manufacture: 2010

Lenton Furnaces 1200˚C Tube Furnace This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order (thermometer not included). It is in reasonably good cosmetic condition, with minor marks. Serial No. 4988Year 1996Eurotherm 808 Controller

Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V Temperature Range Ambient +5°C to 2 (more)60°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Excellent temperature accuracy - Easy to use and maintain - Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3) - Simultaneous display of set constant and measured temperature - Quick Auto stop, Auto Stop, Auto Start operations - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V includes: - 2 x Stainless Steel Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF30 Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Internal volume of 32 L (1.13 cu.ft.) for flexible applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved. Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks. INCLUDED: TheMemmert UF30 Forced Circulation Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN110 Natural Convection Oven 108L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) chamber volume for flexible sample accommodation - Temperature range from +5°C above ambient to +300°C for diverse applications - 1 Pt100 sensor DIN class A in 4-wire circuit for precise monitoring - SingleDISPLAY with digital PID-microprocessor controller and high-definition TFT-color display - Natural convection system for even heat distribution - Electronically adjustable air flap for controlled fresh air admixture - Corrosion-resistant stainless steel interior with integrated heating on all sides - Supports up to 5 grids, with a max chamber load of 386 lbs The Memmert UN110 Natural Convection Oven 108L, 115V provides precision and reliability for diverse laboratory applications with its spacious 108 L (3.8 cu.ft.) chamber and temperature range from +5°C above ambient to 300°C. Featuring a SingleDISPLAY digital PID-microprocessor with high-definition TFT display, this oven allows for precise control, while the Pt100 sensor ensures accurate temperature monitoring. Its natural convection system evenly distributes heat, complemented by an electronically adjustable air flap for optimized airflow. Built with a corrosion-resistant stainless steel interior and capable of supporting up to 5 grids with a maximum load of 386 lbs, the UN110 is engineered for durability and efficient performance. INCLUDED: The Memmert UN110 Natural Convection Oven 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The Applied Biosystems QuantStudio 7 Flex Real-Time PCR System advances your research further by ena (more)bling a broad range of real-time PCR-based applications through its multiplexing capabilities and interchangeable block formats. With a simplified workflow, intuitive software, automation capabilities, and touch-screen interface, the QuantStudio 7 Flex system offers exceptional reproducibility with minimal well-to-well and instrument-to-instrument variation. Features of the QuantStudio 7 Flex Real-Time PCR System include: Increased application versatility through the accomodation of 4 different block types Compatible with over 8 million TaqMan assays for gene expression, genetic variation, gene regulation, or protein expression experiments The intelligent design of the QuantStudio platform combined with Applied Biosystems instrument reliability and accuracy Easy-to-use software, responsive touch-screen, automation capabilities, and effortless block exchange without the need for any tools The QuantStudio 7 Flex system accommodates the interchange of a 96-well, 96-well Fast, 384-well, or TaqMan array card block. The system is delivered with one block type (a 96-well block in this case).

Tilta BS-T03 Follow Focus Shoulder Plate And MB-T03 Carbon Fibre Matt BoxShoulder Plate Kit This ite (more)m was removed from a university where it was surplus to requirement. It is in very good cosmetic condition, we are unable to test it further at our facility. The kit includes the following: 1 x monitor arm1 x tripod mount1 x 80mm lens adaptor1 x 95mm lens adaptor1 x follow focus handle1 x hard carry case1 x 40cm steer whip1 x 50cm steer whip1 x top hand grip1 x 0.5M pitch gear1 x 0.6M pitch gear1 x lens supporter2 x allen keys2 x 10cm rods1 x nun's knickers

F1 Mass Standard - knob weights, wooden box. Nominal value - 250 kg.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

KNF N938.50KT.18 IP20-T Diaphragm Pump Ultimate Vacuum 15 mbar (abs.) Maximum Flow Rate 30L/min (1. (more)8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Compact, quiet and reliable - Small footprint - Maintenance-free The KNFN938.50KT.18 IP20-T Diaphragm Pump is a double-head, dry-running devices usedin a wide range of laboratory applications. It transfers and pumps down withoutcontamination. The pump is equipped with parallel and series connection for thepump heads - resulting in a high pneumatic performance, a durable product andcompact size. Special valves ensure that the product can cope easily withvapour and condensation.INCLUDED: The KNF N938.50KT.18 IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hettich 1324 Swing Bucket Rotor The Hettich 1324 Swing Bucket Rotor is a centrifuge rotor designed f (more)or use in clinical and research laboratories. This rotor body has a maximum capacity of 4 x 100ml buckets, which are sold separately, and can achieve a maximum speed of 4,000 RPM with a maximum RCF of 2,630 x g. It is compatible with Hettich Rotofix 32A and Universal 320/R Centrifuges, which offer precise control for consistent results. The Hettich 1324 Swing Bucket Rotor is a useful tool for labs that require high-speed centrifugation for applications such as molecular biology, biochemistry, and cell culture research. It is easy to install and maintain, making it a reliable and cost-effective solution for your lab's centrifugation needs. INCLUDED: The Hettich 1324 Swing Bucket Rotor includes: - Rotor Body (No Buckets Included) - 6 Month Full Parts and Labor Warranty Hettich 1324 Swing Bucket Rotor SpecificationsMaximum Speed4,000 RPMMaximum RCF2,630 x gMaximum Capacity4 x 100mlMaximum Radius14.7 cmCentrifuge CompatibilityHettich Rotofix 32A & Universal 320/R Centrifuges