Termaks B9420 Oven

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

BARNSTEAD Thermolyne 1300 Muffle Furnace FB1310M-33 Model: FB1310M-33 Capacity: 1.3 litres Working t (more)emperature limit: 1100ºC Continuous operating temperature: 982ºC Table top muffle Heating volume: 100 X 95 X 110mm External dimensions: 200 X 335 X 220 mm 1050 watts / 220V Environmental operating conditions: 17 to 27ºC, humidity less than 80% non-condensing Average cosmetic condition, numerous traces of rust

Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V Operating Temperature Range 40~240°C Operating Pres (more)sure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 27L Features - Easy input of parameters and settings - Digital PID controller supports fixed temperature, quick auto-stop, auto stop, auto start and program operations. - Self-diagnostic and overheating prevention functions - Silicon rubber door seal prevents air from leaking - Independent over heating prevention device for each circuit - Customizable with N₂ gas inlet and communication ports - Calibration off-set function - Easy maintenance Introducing the Yamato ADP Series - a range of versatile laboratory ovens designed to elevate your scientific endeavors. Whether you choose the ADP200C, ADP210C, ADP300C, or ADP310C, you're guaranteed exceptional performance and a host of valuable features. With easy parameter input and settings, our digital PID controller ensures precise temperature control, supporting fixed temperature, quick auto-stop, auto-start, and program operations. Safety is paramount, with self-diagnostic and overheating prevention functions, a silicon rubber door seal to maintain an airtight chamber, and independent overheating prevention devices for each circuit. Customize your oven with N₂ gas inlet and communication ports, and fine-tune settings with the calibration offset function. Maintenance is a breeze, and our safety features include sensor trouble detection, SSR, short circuit detection, heater disconnecting detection, memory error prevention, overheating safeguards, and measurement temperature error detection. Make the right choice for your lab with the Yamato ADP Series.INCLUDED: The Yamato ADP-300C Benchtop Vacuum Oven 27L, 115V includes: - Shelf Plate (3 pcs.) - Power Cord - One Year Manufacturer's Warranty

Memmert VO29 Vacuum Oven 29L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 m (more)bar Chamber Volume 29L (1.0 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO29 Vacuum Oven 29L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO29 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO29 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO29 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO29 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO29 Vacuum Oven 29L, 230V includes: - 1 x Thermoshelf - 2 x Locking Hooks for Thermoshelf - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN160plus Natural Convection Oven 161L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 161 L (5.7 cu. ft.) Features - 161 L (5.7 cu. ft.) internal volume for large sample capacity - Working temperature range from at least 5°C above ambient up to +300°C - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and 2 high-definition TFT-color displays - Precise temperature control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - Digital timer with backwards counter, adjustable from 1 minute to 99 days - Easy-to-clean stainless steel interior, reinforced by deep drawn ribbing with integrated heating on four sides - AutoSAFETY system with over- and undertemperature monitoring "ASF", alarm and automatic heating cutoff - Two stainless steel grids included, with a maximum chamber loading of 462 lbs (210 kg) The Memmert UN160plus Natural Convection Oven 161L, 115V is a high-performance unit designed for precise temperature control and versatile applications in scientific and industrial settings. Equipped with an advanced TwinDISPLAY system featuring two high-definition TFT-color displays, it allows for seamless adjustments of temperature, time, and air flap positioning. The oven operates within a temperature range of +5°C above ambient up to +300°C, offering a high level of accuracy with its 2 Pt100 sensors DIN Class A, ensuring reliable and consistent performance across multiple applications. Built with a robust stainless steel interior, the Memmert UN160plus is easy to clean and durable enough for demanding environments. The unit includes AutoSAFETY features that provide over- and under-temperature monitoring, automatic heating cutoff, and visual and acoustic alarms for enhanced safety. Its spacious 161L chamber accommodates up to 462 lbs, making it ideal for large sample loads, while natural convection ensures even heat distribution. This oven is perfect for laboratories requiring precision, safety, and efficiency. INCLUDED: TheMemmert UN160plus Natural Convection Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

Nikon Eclipse 50i Microscope This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and is in good working order, though we were unable to test the camera without the software. It is in good cosmetic condition with minor marks. Item includes the following: Nikon CFI 19x/22 Eyepiece x 2 Nikon Plan 100x/1.25 Oil Ph3 DL∞/0.17 WD 0.2 Nikon Plan 20x/0.40 Ph1 DL∞/0.17 WD 1.2 Nikon Plan 40x/0.65 Ph2 DL∞/0.17 WD 0.56 LV-TT2 Trinocular Tube Mikrotron EoSens MC1362Serial#: 00704

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 5 g.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Maximum temperature: 300°C Temperature accuracy: Ambient temperature to 200°C: ±0.5°C, 200°C to 300° (more)C: ±0.5° to ±0.8°C (linear increment) Temperature resolution: 0.1°C Heating time: 50°C to 300°C in 3 minutes (0.1°C to 10°C per minute adjustable)