Perkin Elmer Flexar LC Column Oven Lab

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

This SFL (Severn Furnaces ltd) Model - SP1023 Advanced High-Temperature Unit was removed from a univ (more)ersity lab where it was surplus to requirements. It is in reasonably good cosmetic condition with marks from use but has not been tested.

Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V Operating Temperature Range +10-220°C Operatin (more)g Pressure Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Meet the SDP Series Vacuum Oven, an indispensable addition to your laboratory toolkit. Available in both SDP300 and SDP310 models, this versatile oven offers precise control and dependable performance. With an operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, it's suitable for a wide range of applications. The EZ-ZONE Watlow controls ensure ease of use, while the KF25 access port allows for convenient access. Experience exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.1°C at 80°C, ± 0.20°C at 150°C, and ± 0.3°C at 220°C. Heat up times are impressively fast, and cool down times are efficient. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior boasts 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W304 x D508 x H304 mm provide ample room for your samples. With a total internal capacity of 47.2L and three sturdy shelves, each capable of holding up to 15.8 kg, this oven is well-suited for various applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 10A or AC220 - 240 5.5A) and is a reliable workhorse for your lab, weighing in at ~83kg. It comes complete with three shelves, a power cord, and four leveling feet, making it a versatile and essential tool for your laboratory needs.INCLUDED: The Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V includes: - 3 Shelves (2 tall, 1 short bottom) - 4 Leveling Feet - Power Cord - One Year Manufacturer's Warranty

Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 1.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 1.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-103 High Performance Muffle Furnace 1.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

SARTORIUS BIOHIT PROLINE 1-channel mechanical pipette - 5 to 50 μl 5 to 50 μl variable volume microp (more)ipette Single channel Compatible tips: Optifit Reference: 720025 Not calibrated

This item has just arrived in our stock. Please enquire for further details.

ASSIST offers unparalleled pipetting ergonomics. By attaching a VIAFLO electronic pipette to ASSIST, (more) the pipette’s protocols can be performed automatically. It reduces manual pipetting to the minimum, relieving lab personnel from repetitive motions that may cause repetitive stress injuries. Manual pipetting requires practice to achieve reproducible pipetting results. Typical parameters influencing the performance are tip immersion depth and pipetting angle. The automated pipetting capability of ASSIST ensures these parameters are always the same, resulting in an increased reproducibility. Channels: 8-, 12-, and 16- multichannel VIAFLO pipettes Volume: 0.5 µL to 1250 µL Applications: Serial dilutions, Plate filling, Reagent additions, Liquid handling, Automated multichannel pipetting Capacity: 6-well to 384-well plates Type: Air displacement Dimensions (WxDxH): 340 x 360 x 400 mm Weight: 10 kg

PFEIFFER Turbomolecular Vacuum Pump TMH 262-005 with TC100 Controller This was removed from a unive (more)rsity lab where it was surplus to requirements. Included are; PFEIFFER Turbomolecular Vacuum Pump:Model TMH 262-005DN 100 ISO -K, 3P The unit is in good cosmetic condition. The fan blade appears to move freely but it has not been powered up. PFEIFFER Controller:Model TC100Mod no. PM C01 692A The unit is in good cosmetic condition

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) The Accuris NextPette Pipette S (more)et includes variable volume 200 ul, 1000 ul, 5 ml, and 10ml pipettes with carousel stand.INCLUDED: The Accuris NextPette Pipette Set (200, 1000 ul & 5, 10 ml Pipettes) includes: - NextPette 20 to 200ul Pipette - NextPette 100 to 1000ul Pipette - NextPette .5 to 5ml Pipette - NextPette 1 to 10ml Pipette - Carousel Stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty