Lab Oven SLW 32 POL-EKO

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA C 200 Measuring range max. 40000 J Measuring time dynamic approx. 8 min Measuring time isoperibo (more)l approx. 17 min Features - Suitable for educational institutions and industrial laboratories - Manual handling for water and oxygen filling - Offers four working methods: isoperibolic, dynamic, manual, time controlled - Clear and easy-to-use display - User-friendly aftersales support - Automatic mode for ignition and gross calorific value calculation - Decomposition vessel compatible with combustible crucibles (accessory required) - Can control up to eight measuring cells with optional multiserial plug-in card (PCI 8.2) The C 200-System offers a space-saving and cost-effective solution for determining gross calorific values of liquid and solid samples. It meets rigorous validation standards and is suitable for educational institutions, industrial laboratories, and technical schools alike. With manual and automatic modes, clear display, and user-friendly software, it ensures accurate measurements and streamlined data management. Plus, its compatibility with various crucibles and optional multi-cell control capability make it a versatile choice for diverse laboratory needs.INCLUDED: The IKA C 200 includes: - C 200 - C 5010 Decomposition vessel, standard - C 248 Oxygen filling station - Ignition adapter - C 200.1 Measuring cup 2000 ml - Water emptying hose - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Heat Block, 24 x 1.5ml Conical The Benchmark Block, 24 x1.5ml centrifuge tubes (conical) i (more)s for use with any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 24 x 1.5ml Conical includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Suitable with API 4000, 4000 Qtrap, 3200, 3200 Qtrap, 5000, 5500, 5500 Qtrap.

This Bright Microtome Model M3500 was removed from a university lab where it was surplus to requirem (more)ents. The unit powers on and is in good cosmetic condition. it requires 2 x AA batteries to operate (not included). There are some tape marks on the unit from general use the battery compartment had signs of corrosion but we have cleaned this up, but some signs remain. It doesn't affect the operation of the unit. All dials and buttons appear to be responsive to the unit and move freely.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).