10x10 CER Magnetic Stirrer P/N 97042-668 6000ml

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The stage is in good cosmetic condition and is functional. We used one of our own slides to photograph the clarity of the eyepieces and objectives. Included with it are; Leica Objectives:Blue Leica 440 Achro 40/ 0.66 ∞ / 0.17 Red Leica 438 Achro 4 / 0.1 ∞ /0.17 White Leica 467 Achro 100 /1.25 oil ∞/0.17 Yellow Leica 439 Achro 10/ 0.25 ∞ /0.17 The objectives are in good cosmetic condition. There is a little dirt on the housing from general use. Leica Eyepieces:1x Leica E2 WF 10x/181x 10XWF (191A) The eyepieces are in good cosmetic condition.

This Nikon Microphot-FXA Fluorescence Microscope was removed from a university lab where it was surp (more)lus to requirements. The PSU is missing so we were unable to power up the Microscope. It requires a Nikon PSM-4A. The power supply unit for the mercury lamp is present. The PSU is working but the bulb needs to be replaced. The system is in reasonably good cosmetic condition with marks from use. It has; 2x Nikon FX-350X 35mm film cameras attached via Nikon mounts.1 x SOFT RTS 25.4 2mp slider with data lead. 1 x NIKON 4/0.101 x NIKON FLUOR 20 0.75 160/0.171 x NIKON FLUOR 40 0.85 160/0.11-0.231 x NIKON FLUOR 100 / 1.30 OIL 160/0.172 x CFWN D10 X/20 There is a PC with ISMOL Software & relevant PCI cards for connecting everything.

Measurement range: 0°C – 100°C

Lab-Bubble Still Air PCR Enclosure - White - BUB-PCR-SA-WHT This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition with minor marks

This Perkin Elmer LS50B Luminescence Spectrometer was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition, with minor marks from use. The sample plate is not included. Further testing is not possible without the necessary PC and Software.

IN/OUT module – semiconductor digital inputs/outputs which can take two binary states: “ (more)0” (inactive) or “1” (active). The input ativation performs the assigned function of the scale, for example, zeroing, tare or process start. The output activation informs about the execution of the assigned function, for example, a certain weight threshold exceeding, scale stability or the process continuation. The IN/OUT module comes for an extra charge in PUE H315 (4 IN/ 4 OUT).

Labconco CentriVap Aqueous SystemIdeal forbiology, microbiology, biochemistry, pharmaceutical resear (more)ch, and analyticalchemistry laboratories, centrifugal concentrators quickly process theevaporation of multiple small samples. Benchtop Vacuum Concentrators feature30.5cm (12") dia. epoxy-coated aluminum chambers to accommodate a wideselection of high-capacity rotors. A microprocessor controls centrifugal motionto eliminate bumping and foaming during vacuum evaporation. The brushless motorhas a maximum speed of 1725rpm. A large automatic vacuum release valve preventsloss of sample by quickly releasing the vacuum before the rotor stops. Duringstartup, a built-in vacuum delay prevents bumping by allowing the rotor toachieve set speed before applying vacuum. Up to nine user-set programs may bestored to define temperature, heat time, and run time. Program temperature andtime may be altered while the program is being run. Timer may be set for 1 to999 minutes. An easy-to-read LCD shows program number, actual and set pointtemperatures, heat time, run time, and a heat boost indicator. The controlpanel features three Quick-Start* buttons that each store one user-set program.An audible alarm signals completion of set point run time. INCLUDED: The Labconco 7982010 CentriVap Aqueous System, 115V, 60Hz includes: - Benchtop Vacuum Concentrator - Cold Trap -50°C - Clear Canister 7460900 - Moisture Insert 7814900 - 12-13 mm Rotor 7455100 - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty