Funke Gerber 7610 Solubility Index Mixer

Safety and resistance for your laboratory OHS advance is designed to guarantee the highest safety st (more)andards. - The durable watertight housing and IP 54 protection rating ensure durability even in the most aggressive environments. - Built-in safety alarms for overload, over temperature and over current will maintain performance over time by stopping agitation - The safe operation of the start and stop knob and the lock key prevent unintentional starts and changes in working conditions. - The built-in vibration sensor with different sensitivity levels will stop the operation and inform you to make sure your OHS is stable and properly fixed. Continuous operation guaranteed and supported by a 3 year extended warranty. First-class performance OHS Advance is the ideal solution for demanding applications operating with viscosities up to 50,000 mPa. The electronically controlled brushless motor of the OHS 60 Advance agitates up to 40 l (H2O) with a maximum torque of 60 Ncm and guarantees maximum durability. SpeedServoTM torque compensation technology maintains constant speed by automatically adapting to changes in viscosity. Set the OHS 60 Advance electronic speed control from 30 to 2000 rpm. Constant Torque at Any Speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional rod stirrer and VELP OHS Series rod stirrers. The torque remains constant at any speed, even at maximum. Having a constant torque is a very important parameter for the reproducibility of the analyzes. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod fall into the liquid? SmartChuck ™ technology makes this activity quick and easy with the use of one hand and without special accessories. Two simple movements allow you to unlock the protection ring and remove or replace the stirring rod. In the event that the protection ring is opened during the analysis, the instrument stops shaking, showing a safety message on the display. Intuitive and precise control panel The intuitive 3.5 ”OHS Advance TFT display will guide you to precisely set your working conditions and achieve reproducible results. Show key information at a glance. Real-time information on viscosity variation with a resolution of 1 Ncm. Interact with OHS Advance from the real-time graph showing speed, torque and temperature of your test. The OHS Advance works without surveillance thanks to the timer that can be set from 1min to 99.59h. Ideal operating methods can be defined and programmed for demanding tasks where ramps and interval operations are required. Temperature under control OHS Advance is supplied with a Pt100 temperature probe included in the package. Constantly monitor the temperature of your reaction and set the meter to slow down or stop activity if the temperature reaches a defined value. This is important when you want to prevent exothermic reactions from interfering with your analysis! THE BENEFITS OF OHS ADVANCE CONNECTIVITY The OHS Advance is the only rod stirrer to offer the ability to control and monitor processes via Wi-Fi connection to VELP Ermes and via USB. The VELP Ermes cloud platform allows you to control the OHS Advance from PC, smartphone and tablet through a simple and intuitive web interface. With this platform designed by VELP it is possible to activate the shaking, set a timer, set a method (among those saved on the device), download and share reports with a click. For applications in the pharmaceutical, biotechnology and life science sectors, VELP Ermes can manage OHS Advance localized in clean rooms or other controlled environments, without the need for lengthy safety procedures. With the OHS / CotrollerSoftTM software, VELP offers the possibility to all laboratories that cannot benefit from cloud services, a valid alternative with USB connectivity. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS ADVANCE MODELS A - LCD display B - Display keys C - Stirring speed kond D - Lock key E - Main switch F - Smart Chuck

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Speed: 600-3200 rpm Dimensions (HxWxD): 165 x 122 x 165 mm Weight: 4 kg

Type of movement: orbital Shaking stroke: 4.5 mm Permissible ON time: 100 % Speed range: 200 – 2500  (more)rpm Speed display: scale Operating mode: continuous operation Touch function: yes Dimensions (WxHxD): 115 x 80 x 230 mm Weight: 3.2 kg

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Motic Moticam BTI10 Microscope Camera Highest Live Display Mode 1920x1080 Pixels Capture Resolution  (more)4MP Maximum Frames per Second (FPS) 30 FPS Features - Fast live images up to 30 fps on any microscope with a vertical photo tube - 10-inch detachable android tablet - Wi-Fi and ethernet data transfer - Pre-installed MotiConnect app allows you to capture, save, edit and share - Sensor type: CMOS - Lens mount: C-mount - Image capture resolution: 4 MP - Video resolution: 720P (HD) - Built-in micro-SD port - Functions: image and video capture, image measurement, adjustments, white balance, exposure, and individual objective calibration system The Motic Moticam BTI10 is a digital microscope camera with a 10-inch Android tablet. The BTI10 will deliver fast live images up to 30 frames per second on any trinocular microscope with the right C-mount adapter. The Moticam BTI10 provides the convenience of a detachable tablet and Wi-Fi data transfer, making it easier than ever to capture your images and bring them anywhere. With the pre-installed MotiConnect app, you can view live camera streams, capture, edit, measure, annotate, save, and share your microscope image by simply touching the icons on the tablet. The MotiConnect app makes data sharing possible in a collaborative environment, encouraging teamwork and collective learning experiences. Please note, that the photo is for illustrative purposes; the Included tablet is an Android tablet. INCLUDED: The Motic Moticam BTI10 Microscope Camera includes: - USB cable - Motic 4-dot calibration slide - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty