Thermo Epredia Microm HM355 S Automatic Microtome Mikrotom CoolCut Foot Pedal STS

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The cryostat 500 OM is a highly efficient microtome for a cutting temperature range down to -40°C. D (more)esigned as an upright standing unit with an opn-top working area, the instrument allows convenient and ergonomic handling in standing and sitting position. Cooling of chamber (at 20°C ambient temp): 20°C down to -40°C NB: Cooling of specimen: Disabled Section thickness range: 0.5 – 90 µm Resolution: 0.5 – 2 µm: 0.5 µm 2 – 10 µm: 1 µm 10 – 20 µm: 2 µm 20 – 50 µm: 5 µm 50 – 90 µm: 10 µm Trimming thickness range: 5 – 300 µm Resolution: 5 – 10 µm: 5 µm 10 – 100 µm: 10 µm 100 – 300 µm: 100 µm Specimen retraction during return travel: 40 µm Horizontal feed range: 28 mm Vertical specimen stroke: 64 mm Coarse feed: 800 µm/s Dimensions (WxHxD): 840 x 1120 x 780 mm Weight: 180 kg

Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V Internal Capacity 300L T (more)emperature Range Ambient +10-210°C Temperature Accuracy ±1°C (at 210°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Semi automatic benchtop glassware washer with upward and downward two-way pressurized water with rotating jet nozzles bringing high level cleaning. Easy to to operate by simply setting time then start. With built-in water heater, no boiler piping and water heating system are required. Optional jet rack is available for hard to clean targets, such as glassware with narrow neck or body. Washing water temp. range: ambient ~60°C.INCLUDED: The Yamato AW-47-115V Semi-Automatic Benchtop Laboratory Glassware Washer, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 FT.18RCP Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 FT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 New in box Eppendorf 8 x 15ml Adapters, Cat. # 580478 (more)3000 for the S-4-72 Rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 are used with the Eppendorf 5804/R and 5810/R Centrifuges. The Eppendorf 8 x 15ml Adapters, Cat. # 5804783000 arediscounted, brand-new, and includes a Full 6 Month Parts and Labor Warranty.