Microm HM355 S Automatic Microtome Mikrotom Thermo Epredia

The cryostat 500 OM is a highly efficient microtome for a cutting temperature range down to -40°C. D (more)esigned as an upright standing unit with an opn-top working area, the instrument allows convenient and ergonomic handling in standing and sitting position. Cooling of chamber (at 20°C ambient temp): 20°C down to -40°C NB: Cooling of specimen: Disabled Section thickness range: 0.5 – 90 µm Resolution: 0.5 – 2 µm: 0.5 µm 2 – 10 µm: 1 µm 10 – 20 µm: 2 µm 20 – 50 µm: 5 µm 50 – 90 µm: 10 µm Trimming thickness range: 5 – 300 µm Resolution: 5 – 10 µm: 5 µm 10 – 100 µm: 10 µm 100 – 300 µm: 100 µm Specimen retraction during return travel: 40 µm Horizontal feed range: 28 mm Vertical specimen stroke: 64 mm Coarse feed: 800 µm/s Dimensions (WxHxD): 840 x 1120 x 780 mm Weight: 180 kg

This Bright Model M3500 Rotary Microtome was removed from a university lab where it was surplus to r (more)equirements. The unit powers up with 2 x AA batteries (not included) and is in good working order mechanically, but has not been tested on samples. It is in very good cosmetic condition with only minor marks from use.

This Reichert-Jung Cryocut E  Type - 97 00 51 Cryostat Microtome was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition but has some marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MULTI-HS 6 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display when (more) the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 100 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

Speed: 100 to 14680 rpm (50 rpm increments) RCF: 1 to 20238 x g (50 x g increments) Run time: 30s to (more) 9:59 h, infinitely (0.5 min increments up to 10 min, thereafter in 1 min increments) Dimensions (WxDxH): 236 x 320 x 227 mm Weight: 13.4 kg Equipped with: 1x Eppendorf FA-45-24-11 biocontainment lid 1x Eppendorf FA-45-24-11 fixed angle rotor (max 15000 rpm; 24x 1.5 mL/2.0 mL micro test tube capacity)

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01159Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12303, 12290 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe No testing carried out.

Job Lot Of Swagelok Pressure Gauges + Compression Fittings These were removed from a university lab  (more)where they were surplus to requirements. The parts are as follows: PART NUMBER DESCRIPTION CONDITION QUANTITY PGI-50m-PG25-LASX-ABE Pressure Gauge, Bottom entry, 0-25 Bar - Swagelok BN 18 Valve 1/4" Ball Valve - Boss/Waverley & Others Used 16 3/8" & 3/16" nuts, tees , fittings Swagelok Assorted Assortment ~60mm Panel mount, bottom entry gauge  BNIB 5 PGU-50-PC200-L-4FSF Gauge, bottom entry, UHPurity - Swagelok BN 6 PGU-50-PC200-C-4FSF Rear entry BNB 5 Pressure gauge Oil filled, rear entry, 0-11 Bar New 4 Pressure gauge Bottom entry, 0-11 Bar New 6 Union elbow 3/8" Elbows  6 Union cross 3/8" Crosses  5 Straight union 3/8" Union  14 SS-4WVCR-6-400  BNIB 6 SS-4WVCR-CP  BNIB 6 Union 3/8" Elbow Used 5 SS-810-1-8W 1/2" tube x 1/2" male weld BNIB 2 SS-600-7-6-BMP 3/8" x 1/2"F  2 SS-PB4-TA4 Box of 10 quick connects BNIB 1 SS-PB8-TA8 Box of 10 quick connects BNIB 4 SS-P Box of 10 quick connects BNIB 7 SS-QC4-S-400 Box of 10 quick connects BNIB 3 SS-QC4-B-4PM Box of 10 quick connects BNIB 1 Assorted quick connects Assorted quick connects BN ~50

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW