Leica Reichert-Jung 2055 Autocut Rotary Microtome

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The cryostat 500 OM is a highly efficient microtome for a cutting temperature range down to -40°C. D (more)esigned as an upright standing unit with an opn-top working area, the instrument allows convenient and ergonomic handling in standing and sitting position. Cooling of chamber (at 20°C ambient temp): 20°C down to -40°C NB: Cooling of specimen: Disabled Section thickness range: 0.5 – 90 µm Resolution: 0.5 – 2 µm: 0.5 µm 2 – 10 µm: 1 µm 10 – 20 µm: 2 µm 20 – 50 µm: 5 µm 50 – 90 µm: 10 µm Trimming thickness range: 5 – 300 µm Resolution: 5 – 10 µm: 5 µm 10 – 100 µm: 10 µm 100 – 300 µm: 100 µm Specimen retraction during return travel: 40 µm Horizontal feed range: 28 mm Vertical specimen stroke: 64 mm Coarse feed: 800 µm/s Dimensions (WxHxD): 840 x 1120 x 780 mm Weight: 180 kg

*No weight set on template* Sorvall Porter-Blum Ultra Microtome MT-2 Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and fully functional. Also includes: 1 x Pivoting Microscope Arm1 x Telescopic Locking Screw1 x Telescopic Arm1 x Microscope Locking Screw 2 x Microscope Holder & Stereo Microscope

This Bright Microtome Model M3500 was removed from a university lab where it was surplus to requirem (more)ents. The unit powers on and is in good cosmetic condition. it requires 2 x AA batteries to operate (not included). There are some tape marks on the unit from general use the battery compartment had signs of corrosion but we have cleaned this up, but some signs remain. It doesn't affect the operation of the unit. All dials and buttons appear to be responsive to the unit and move freely.

Head: Trinocular Eyepiece: Olympus WHK 10x/20 L Objectives: DPlan 10x/0.25, APlan 40x/0.65, SPlan Oi (more)l 100x/1.25, DPlanApo UV Oil 20x/0.80, DApo UV Oil 40x/1.30, DApo UV Oil 100x/1.30 Final Magnifications: 100x, 400x, 1000x Nosepiece: Six-way Focusing: Coaxial coarse and fine control knobs Illuminator: Fluorescence and Halogen

Qiagen Pyrosequencing/Biotage Model PSQ 96MA This was removed from a university lab where it was su (more)rplus to requirements. The unit powers up but has not been tested further. It is i good cosmetic condition with minor marks.

Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~80 min. Internal Capacity 17.5L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device - Selectable options include an exhaust system unit, N₂ gas loading device, a temperature output terminal, a time up/alarm output terminal, and a sample tray Standard 17.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty