Bigneat F3-XIT-D Powder Weighing and Handling Cabinet Lab

The screen of the display, provide intuitive and practical colour codes which immediately show the c (more)abinet status: • Green screen: Cabinet in safe condition • Red screen: Cabinet out of specification • Yellow screen: Cabinet being decontaminated The main screen provides a visual display of the laminar flow speed and filter clogging. The Ecomode function allows the cabinet to run at low speed in one single click, in order to protect the sample while the operator is doing other tasks. This saves energy, reduces sound level and heat emission. Other features of the display: • Constant information on the air flow status: – Laminar flow speed – Extraction rate – Inflow speed • A timer to program the daily activation of fans and UV light • Two password levels (user and technical service) • Acoustic and visual alarms with an information message: – Excessive or insufficient laminar flow speed – Insufficient exhaust rate – Glass away from the working position – Open front window – UV lamp activated (interlocked with the front closed position) Laminar flow speed: 0.35 m/s Laminar flow rate: 1310 m3/h Front entry air speed: 0.5 m/s Extraction flow rate: 564 m3/h Lighting: > 1000 Lux Sound: < 58 dBA Vibration: < 0.005 mm RMS. Filters: HEPA/ULPA H14 filters. Digital display with PIN password for menu settings box. 2 electrical connections left/right. Dimensions (WxDxH): 1964 x 759 x 1260 mm Internal dimensions (WxDxH): 1869 x 602 x 580 mm Support frame height: 900 mm Weight: 280 kg

Volume air recirculation: 1205 m³/h Volume air exhaust: 494 m³/h Volume air total: 1699 m³/h Air flo (more)w: 0.45 m/s Internal dimensions (WxDxH): 1535 x 600 x 655 mm Dimensions (WxDxH): 1625 x 790 x 1380 mm Height support frame: 800 mm Weight: 290 kg

Dimensions (WxDxH): 1300 x 860 x 2300 mm Internal dimensions (WxDxH): 1200 x 585 x 700 mm Must be co (more)nnected to an extraction channel.

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow &amp; CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE B B (more)eing able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

Dimensions (WxDxH): 600 x 490 x 600 mm

VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Speed  (more)1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance - High performance even at low vacuum levels - Optimized vacuum even with gas ballast for condensate purge - Whisper quiet and low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The pump MZ 2C NT is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. This pump is our most popular chemistry diaphragm pump, and is the heart of a family of VACUUBRAND pumping systems. The NT-series features further improved performance data and superior vapor tolerance. Two-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors with medium vacuum requirements. They do not consume water and therefore do not produce any contaminated waste water. The media contacted materials made of chemically resistant fluoroplastics open a wide range of applications in chemistry and pharmaceutics. The robust design provides very good durability and long service intervals even in demanding chemistry applications. Typical usages are vacuum generation for rotary evaporators, vacuum concentrators, gel dryers, vacuum ovens and many other laboratory applications. The MZ 2C NT is the powerful basic pump for a complete family of well established and reliable chemistry vacuum systems and pumping units.INCLUDED: The VACUUBRAND MZ 2C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF LABOPORT SC 840 G IP30 Diaphragm Pumping System w/ Wireless Remote Control Ultimate Vacuum 6 mba (more)r Maximum Flow Rate 34L/min (2.04 m3/h) Protection Class IP30 Features - Automatic, accurate recognition and monitoring of the boiling point using the integrated ramp function - High recovery rates even with low boiling point solvents - Remote-controlled for safe operation from outside closed fume hoods - ATEX compliant to (Ex) II 3/-G Ex h IIB+H2 T3 Gc internal atmosphere only - Easy, intuitive control via touchscreen display and precise rotation knob - Four operating modes for nearly all common lab applications - Integrated rotation speed control for precise vacuum control - Integrated gas ballast valve - Environmentally friendly Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side, high performance condenser on pressure side and vacuum controller. Ideal for rotary evaporation and other applications where control of vacuum level is important. INCLUDED: The KNF LABOPORT SC 840 G IP30 Diaphragm Pumping System w/ Wireless Remote Control includes: - 2 x Coated Collection Flasks - 2 x Flask Clamps - USB Cable for Connecting to PC - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 2 x microplate swing out rotor for Z287-A The Hermle 2 x microplate swing out rotor for Z287- (more)A is an essential piece of equipment for laboratories conducting experiments with microplates. This rotor can spin microplates at a maximum speed of 3,800 rpm, generating an RCF-value of 1,453 xg. With a maximum radius of 9.0 cm, it provides ample centrifugal force to ensure efficient separation of samples in a relatively short amount of time. The rotor is equipped with an efficient acceleration and deceleration system, with acceleration taking 27 seconds and deceleration taking 29 seconds. This system ensures that samples are not damaged during the spinning process and that they are collected safely at the end of the experiment. The maximum loading weight for the rotor is 100g, with a loading height of 20mm, making it suitable for use with microplates of different sizes. Overall, the Hermle 2 x microplate swing out rotor for Z287-A is a valuable addition to any laboratory conducting experiments with microplates. It is an efficient and reliable piece of equipment, capable of generating enough centrifugal force to separate samples quickly and effectively. Its efficient acceleration and deceleration system, coupled with a high maximum speed and RCF-value, make it a top choice for laboratories looking to maximize the efficiency of their experiments. INCLUDED: The Hermle 2 x microplate swing out rotor for Z287-A includes: - Operator's Manual - Manufacturer's Warranty