IKA C-MAG HP 10 Hot Plate

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and was tested with a digital thermometer. It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C. The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Witec WCB-11 digital precision bath. Capacity 11 L. Temperature range from ambient +5°C to 100°C. Ac (more)curacy ± 0.1 °C. Digital controls. Timer up to 99 h 59 min. Pumping 5 L/min. Stainless theft. Top. Bathtub effective space: 170*240*150 mm. Exterior dimensions: 335*275*385 mm. User manual. El baño de precisión digital Witec WCB-11 is Ideal for biotechnology, clinical, environmental, medical, petroleum & food industry, pharmaceutical,  industrial applications and connection with evaporators and viscometers.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Leica DMIL Inverted Microscope Type 090-135.001 This was removed from a university lab where it was (more) surplus to requirements. The unit powers on and is in working order. The focus knob is quite stiff but the fine adjustment works as intended. It is in good cosmetic condition with minor marks. Includes: -Leica ∞/-/ C PLAN L 10x/0.22 PH 1 (506078)-Leica ∞/0-2 C PLAN L 20x/0.30 PH 1 (506152) 2 x Eyepieces:-Leica 10X/18 (527000)-Leica 10X/18 M (527001)

Carl Zeiss Axiovert 200M Inverted Microscope This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has faults. Faults; - Unable to move the stage with onboard or mechanical controls, therefore, unable to focus on the slide. - The display is illuminated but shows no text. - No cable for PALM joystick control The automated functions that work are; - Light increase/decrease - Filter selection - Objectives selection - Optical view selection Included are; 2 x Eye Pieces: W-Pl 10x/23 (1016-758) 3 x Objectives:- 1x Zeiss FLUAR 5x/0.25 ∞/0.17 (44 01 25) 1x Zeiss Ph3 Plan-NEOFLAUR 100x/1.30 oil ∞/0.17 (1066-987) 1x Zeiss LD ACHROPLAN 63x/0.75 Korr Ph2 ∞/0.17 Ph2 (44 08 61) 1x P.A.L.M Microlaser Technologies Joystick Controller. 1x Zeiss Lamp Power supply - HBO 100W 1003-928 (426-784)S/N: N 01415621Powers on.Unit is displaying 140.10 Hrs

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab This system was removed from a (more) university lab where it was surplus to requirement. Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility. Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware. Nucleocounter C-200Serial No. 9000201112003520 Lenovo Thinkpad T15 laptopWindows 10 operating systemSerial No. PF-2J1PMV Also includes the following: Included:2 x Low-voltage power supplies1 x Data lead

AFFORDABLE PRICE AND EXCELLENT RESULTS The Pioneer PX combines basic weighing functionality with com (more)petitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education environments. The PX is affordably priced and intuitively designed for intelligent operation, with a 2-line display to provide additional information and USB and RS232 interfaces for easy communication connection. - Excellent value for money - Built to last, Pioneer is designed with a metal base frame, stainless steel underplate and weighing pan - Features of the top class as standard: second line in the display for additional information or usage tips; static removal bar for proper grounding; USB connectivity. Other Standard Features and Equipment Metal base, plastic top housing, removable stainless steel weighing pan, removable glass draft shield or side doors, real-time clock with GLP/GMP data, integrated weigh below hook, safety bracket, safety lockout for adjustment and protective hood, user selectable environmental filters and brightness settings, auto tare, auto dim, user selectable span calibration points, software lockout and reset menu, communication settings and options user selectable data printout, user definable project and user ID, software overload/underload indicator, stability indicator, operation in 11 languages. MODELS AVAILABLE InCal= internal calibration. ExCal= external calibration *CE approved models STANDARD FUNCTIONS FOR PROFESSIONAL USE - Real-Time Clock (RTC) function maintains accurate time even in the event of a power outage. The GLP/GMP data output function allows sample name, project, user and balance IDs to be recorded, helping to meet traceability and compliance requirements. Password protection reduces the risk of accidental or unauthorized changes. - Equipped with USB and RS232 connectivity ports, the Pioneer PX scale allows for easy communication with a PC, impact printer or Zebra label printer. - Eco-friendly features: Auto shut-off and other brightness settings save energy when the scale is not in use.

Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V Temperature Range Ambient + 5°C to 550°C Plate Size 7 (more) in x 7 in (18 cm x 18 cm) Temp. Stability +/-1% Plate, below 100°C +/-1°C and +/-0.5% Probe, below 100°C +/-0.5°C Features - Heating capacity up to 550°C for diverse lab applications - Ceramic 7 x 7 inch top plate for consistent heat distribution - Precise temperature stability within +/-1% for reliable results - High-contrast LCD display for clear temperature monitoring - Available Ethernet, USB, and RS232 connectivity options - Certified for safety with CE and TUV approvals - Programmable timer from 1 minute up to 99 hours, 59 minutes - Compact design with dimensions of 12.94 in x 4.56 in x 8.69 in The Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V, delivers precise heating with a powerful ceramic top plate, ideal for laboratory applications requiring consistent temperature control. Designed to reach up to 550°C, this hotplate ensures reliable performance across a variety of tasks, from solution sterilization to pH optimization. Its durable 7 x 7-inch ceramic plate evenly distributes heat, supporting accurate and stable temperatures with +/-1% precision, even for temperature-sensitive procedures. Equipped with a bright, high-contrast LCD display, this model provides clear real-time monitoring, while Ethernet, USB, and RS232 connectivity options streamline data logging and remote operation. Certified for safety with CE and TUV approvals, and designed with a programmable timer up to 99 hours and 59 minutes, the Guardian 5000 e-G52HP07C offers a dependable, user-friendly solution for professional lab environments. INCLUDED: The Ohaus Guardian 5000 e-G52HP07C Hotplate, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Made of transparent plastic, secures a balance housing against scratches, dust etc. Intended for bal (more)ances enclosed in housing of A1 type and equipped with 128 x 128 weighing pan.