Heating Mantle EM0500/CE - 500 ml ELECTROTHERMAL / BARNSTEAD

Heating Mantle EM0500/CE - 500 ml ELECTROTHERMAL / BARNSTEAD 500ml Capacity 230VAC 50/60Hz, 200W E (more)lectrical Requirement Chemically resistant polypropylene outer casing Maximum element temperature 450°C

Medline 50ml Controlled Heating Mantle MS-E Equipement neuf dans son emballage d'origine Référence : (more) MS-E1005 (MS-E) Volume (ml) 50 Construction du boîtier en acier, avec revêtement résistant aux produits chimiques Poudre de silice moulée pour isolation thermique Élément chauffant Fil Nichrome Manteau Tapis en fibre de verre tissé Température de l'élément jusqu'à 450 °C Alimentation 220 V CA Watts 60

Electrothermal heating mantle with magnetic stirring for 2000 ml flask New equipment in its original (more) packaging Reference: EMA2000/CEB For round bottom flasks of 2000ml / 2 liters Integrated temperature regulator: Temp. Max. 450°C Magnetic stirring speed adjustable up to 520rpm, and bidirectional Chemically resistant polypropylene outer casing Safety with automatic short circuit in case of liquid spillage Volume: 2000ml Gross weight: 5.405 kg Gross dimensions: 51 x 42.5 x 28 cm

GM 1757 Used laboratory heating mantle Electrothermal type EM0100 / C MK4. The housing is made of po (more)lypropylene chemical resistance are some limited damage from spills. Temperature range: from ambient temperature to 450 ° C. Capacity: 100ml. Technical specifications: 220 V, 50 Hz, 60 W. Equipped with a tripod holder (diameter 12.7 mm). External dimensions (D) x (H) x (W): 26.5 x 12.5 x 17 cm. Status: Used, in good condition. Warranty: 1 month.

115 V

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

The newest line of Radwag mass comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1mg to 5 g in class E1 and lower. Mass comparators are used for both, ensuring traceability of mass measurements and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. The standard equipment of the UYA 5Y.KO mass comparator is an anti-draft chamber eliminating imperfect conditions in weighing rooms (air drafts). The mass comparator is placed inside the anti-draft chamber. Sliding side panes enable easy access to the weighing chamber. Mass comparator UYA 5Y.KO series, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. Such solution guarantees elimination of temperature influence (warming of electronic elements) on the comparator's indications. The comparator features an aesthetic, cylindrically shaped weighing chamber with glass draft shield and automatic door opening system. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on the measuring result. CAUTION: In order to carry out the weighing process by means of microbalance and ultra-microbalances correctly, it is necessary to prepare the workstation and to operate the device as required. Usage and installation guidelines are to found in the following document: Installation and usage conditions for ultra-microbalances and microbalances.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. Control is t (more)hrough a simple on/off switch and the unit will run continuously at the fixed speed of 33 rpm. Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to 100mm diameter. Number of rollers: 10 Speed: 33 rpm Amplitude: 16 mm Maximum load: 3.0 kg Controls: Analogue Timer: No Roller size (l x diameter): 300 x 30 mm Attention 120V!

one LINEAR POSITION SENSOR Manuf: PENNY + GILES / UK Model: LP- 2C S/N: 309066 Description: high pr (more)ecision linear position sensor for applcations in AVIONICS or other high technics fieldswith cardanic mounts on both endstotal resistance..............................................1000 Ohmstotal stroke..................................................... from 2 mm to 105 mm instrument is in used condition, 100 % functional tested in GERMAN GOV LAB ( NOT calibrated )