Offering the best quotes for your research!
New and used scientific instruments
🚚 Shipping Worldwide 🌎
✉️ info@questpair.com
Yamato DKN-602C Programmable Forced Convection Laboratory Oven 150L (115V)
Product Description
Yamato DKN-602C Programmable Forced Convection Laboratory Oven
- Capacity: 150 liters
- Circulation Method: Forced air circulation using Scirocco fan and condenser motor (10W)
- Temperature Range: Room temperature +10°C to 260°C
- Temperature Accuracy: ±1°C at 210°C
- Temperature Distribution Accuracy: ±2.5°C at 210°C
- Max Temperature Reach Time: 90 minutes
- Materials: Interior stainless steel; exterior cold rolled steel with melamine resin baking finish
- Heat Insulation: Glass wool
- Heater: SUS pipe heater, 1.5 kW, controlled by SSR circuit
- Controller: Programmable PID microprocessor with 3-pattern, 30-step program capability and repeat functions
- Display: Digital LED (green for measured temp, red for set temp)
- Timer: Range from 1 minute to 999 hours 50 minutes with wait function
- Operation Modes: Fixed temperature, program operation, auto start, auto stop, quick auto-stop
- Observation Windows: Three chemical-strengthened glass windows, each 250 x 280 mm
- Safety Features:
- Self-diagnostic for temperature sensor abnormalities, heater disconnection, SSR short
- Automatic overheating prevention
- Electric leakage breaker with overcurrent protection
- Key lock function
- Additional Functions: Calibration offset, uninterruptible memory power, built-in exhaust ports (two 30 mm I.D. on top), cable hole (30 mm I.D. right side)
- Dimensions (Internal WxDxH): 600 x 500 x 500 mm
- Dimensions (External WxDxH): 710 x 651 x 870 mm
- Weight: 65 kg
- Shelves: One stainless steel shelf included (15 kg max load), 13 step positions at 30 mm pitch; shelf bracket qty: 4
- Power Supply: 115V 12.5A (with plug) or 220V 7A (no plug, round terminal)
This oven is optimized for precise temperature control and programmability with extensive safety measures suitable for laboratory incubation, drying, and heating applications.
Item Stats
Product details
| Model | DKN-602C |
| Circulation Method | Forced air circulation |
| Operating Temp. Range | Room temp. +10°C~260°C |
| Temp. Adjustment Accuracy | ±1°C (at 210°C) |
| Temp. Distribution Accuracy | ±2.5°C (at 210°C) |
| Max. Temp. Reaching Time | 90 min |
| Interior/Exterior Material | Stainless steel / Cold rolled steel plate with melamine resin baking finish |
| Heat Insulating Material | Glass wool |
| Heater | SUS pipe heater/1.5kW |
| Fan Type / Fan Motor | Scirocco fan, Condenser type motor 10W |
| Cable Hole | 30mm I.D. (on the right side) 1pc. |
| Exhaust Port | 30mm I.D. x 2 (on top) |
| Observation Window | 250 x 280mm Chemical strengthening glassx3 |
| Temp. Controller | 3 patterns program controller, PID control by microprocessor |
| Temp. Setting Method | Digital setting by ▲/▼ key |
| Temp. Display | Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED |
| Timer | 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function |
| Operation Function | Fixed temperature operation, Program operation, Auto start, Auto stop, Quick Auto-stop |
| Program Mode | Program operation : 3 patterns, 30 steps (30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function |
| Additional Functions | Calibration off-set function, Key lock, Uninterruptible power for memory |
| Heater Circuit Control | SSR control |
| Sensor | K-thermocouple |
| Safety Device | Self diagnostic functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection |
| Internal Dimensions W×D×H | 600×500×500 mm |
| External Dimensions W×D×H | 710×651×870 mm |
| Internal Capacity | 150L |
| Shelf Plate With Standard Load | 15kg/piece |
| Shelf Rest Step Number / Shelf Rest Pitch | 13 steps / 30mm |
| Power Source 50/60Hz | 115V 12.5A (with plug) 220V 7A (no plug, round terminal) |
| Weight | 65kg |
| Shelf Plate | Stainless steel, 1pc on the bottom screwed (DKN912C, 2 pcs) |
| Shelf Plate / Bracket | 2 pcs. / 4 pcs. |
Documents
About QuestPair
Our Mission
QuestPair is Europe's leading platform for scientific equipment, connecting researchers and organizations with verified suppliers of both new and pre-owned laboratory instruments in the biotech and material science industry. Our aim is to make the procurement of scientific instruments more efficient, cost-effective, and reliable, so that laboratories can focus on advancing science rather than searching equipment and negotiating deals.
Why Choose Us
Founded by scientists for scientists, we understand your challenges. Our AI-powered platform offers transparent pricing, verified quality, and expert support, ensuring you find the perfect equipment for your research needs.
Verified Quality
Every piece of equipment undergoes thorough verification by our expert team, ensuring reliability and performance.
Cost Efficiency
Access both new and premium pre-owned equipment, saving up to 40% without compromising on quality.
Expert Support
Our dedicated team provides personalized guidance throughout your equipment procurement journey.
Ready to Transform Your Research?
Join thousands of biotech scientists who trust QuestPair for their equipment needs.
What customers think about QuestPair
Brilliant service. Everything arrived and was exactly as expected
Jon Welburn
Great customer service! Got me great options for the equipment I was looking for and in a timely manner.
Pamela
Space Lab Technologies, LLCHarm is very responsive to help me find the right equipment. The product I received is in a good condition.
Ph.D. Hsin-Wen Liang
Northeastern UniversityFrom €2,954.37*ex. VAT
In Stock
Get a quote within one business day
Verified equipment
Trusted warranties & returns
Safe payment and fast delivery
Didn't find what you're looking for?
Our sales team specializes in sourcing custom and hard-to-find products to meet your exact specifications. Submit a request for a tailored quote.
Frequently Asked Questions
Is this equipment new or refurbished?
How long does shipping take?
What about warranty and returns?
Why request a quote?
Need help choosing the right tool?
- Accurate policy information specific to your chosen product
- Clear understanding of warranty coverage and terms
- Detailed return policy explanation
- Transparent shipping options and costs
Customer Service
Here to help you with: Product Inquiries, Shipping & Support, Technical Support, Business Inquiries and Press.
We are available to assist you Mon-Fri, 10am - 5pm CET.