Thermo Scientific Drybath Adv 4blck Dry Bath/Block Heater

LAUDA ECO Heating thermostat LAUDA ECO stands out for its range of features and ease of use. ECO the (more)rmostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that the regulation of the flow between inside and outside is also possible during operation. - The circulation pump can be adjusted on six levels - The ECO heating thermostats line includes transparent baths up to 100°C and stainless steel baths up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Temperature graphs on display - Convenient operation with softkey cursor - Mini USB interface Performance graph of the pressure pump on the six levels. TECHNICAL VISUALIZATION 1 Light sensor for automatic control of display brightness 2 Monochrome LCD display 3 Control panel (refer to following page) 4 Mains switch 5 Selector switch for dividing up the external and internal pump flow 6 Pump output for internal bath circulation 7 Pump output for bath circulation or connection to the pump connection set 8 Pt100 temperature sensor 9 Heater Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead

Simple model freezer for under a workbench. Capacity: 88 L Weight: 34 kg

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

Memmert UF160 Forced Circulation Oven 161L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 161 L (5.69 cu.ft.) Features - Spacious internal volume of 161 L to ensure functionality across a variety of applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF160 Forced Circulation Oven 161L, 115V offers precision and reliability for your most demanding heating applications. Featuring a setting temperature range of +20 to +300°C and a working temperature range that of 10°C above ambient up to +300°C, this oven is designed to meet a variety of laboratory needs. The state-of-the-art ControlCOCKPIT provides an adaptive multifunctional digital PID-microprocessor controller with a high-definition TFT-color display, ensuring easy monitoring and precise temperature management. Safety and efficiency are at the forefront with the Memmert UF160. It includes an adjustable electronic overtemperature monitor and a mechanical temperature limiter to prevent overheating, safeguarding both the oven and its contents. The interior, crafted from easy-to-clean stainless steel and featuring integrated heating on four sides, maximizes heat distribution and retention. Additionally, the oven's forced air circulation system, adjustable in 10% steps, optimizes the internal environment, while the fully insulated stainless steel doors with two-point locking enhance thermal efficiency and security. INCLUDED: TheMemmert UF160 Forced Circulation Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Labconco FreeZone Benchtop Shell Freezer The Labconco FreeZone Benchtop Shell Freezer provides a mea (more)ns to freeze a thin coating of sample on the inside walls of flasks. Since shell frozen samples have a greater surface area than slab frozen samples, freeze drying is enhanced. INCLUDED: The Labconco 7949020 FreeZone Benchtop Shell Freezer, 115V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. The Explorer series includes three high-capacity precision models with capacities up to 35 kg. Same functions as all other Explorers, such as AutoCal ™ and 1 second stabilization time. - The display can be separated from the base by up to 5 feet (1.5 meters) to fit operational needs in almost any workspace. A 27 foot (9 meter) cable is also available. when additional flexibility is needed. - Die-cast metal base and 377 × 311mm stainless steel stand base, the Explorer High Capacity is built to withstand everyday use Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

Manufacturer: CTC Analytics Model: Valve Drive MV 02-01A MV 02-01A for PAL System SNo.0201 Descripti (more)on: This valve drive for PAL Systems is of the MV 02-01A type. The includes a cable CBL RS20R-300 and weighs 1.4 kg Items delivered: - CTC Analytics VALVE DRIVE MV 02-01A for PAL System- Cable CBL RS20R-300 Condition: The unit is in excellent cosmetic as operating condition, 100% functional tested and ready to be applied.

This Carl Padberg Zentrifugenbau LE was removed from a university lab where it was surplus to requir (more)ements. The cosmetic condition of this item is fairly good and it has powered on. We set the unit to 20,000rpm. It does ramp up quite slowly to speed. It reached 21,000+ and started to hold speed. We're not sure how accurate the speed adjustment is. It didn't seem to fully hold at 20,000rpm, it kept slowly rising. The belt looks like it needs replacing too. For this reason, It is sold for spare/repairs The speed range is from 15000 to 40000 rpm. Additionally included: 1x New Brunswick Scientific power supply switching/speed selection unit 1x Huber and Moser motor

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

RMCM-100 robotic mass comparator guarantees the utmost repeatability within 1 g - 100 g range with t (more)he readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-100 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-100 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-100 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

Scale HY10.H for statistic control Scales HY10.PGC series is equipped with module for control of pac (more)ked goods. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after pre-defined quantity of packages (samples) has been controlled. Number of the packages is fixed by scale program depending on product batch size. Scales features 10,1" colourful, graphic touch screen display and full alphanumeric keyboard aiding scale operation and setting control parameters. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scales memory and at the same time it can be printed by printer connected to the scales. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).