Heating immersion heater / Circulation thermostat LAUDA E100

Corepoint Scientific NSBF231WSW-0 -15C to -35C Single Solid Door Plasma Freezer Temperature Setpoint (more) Range -15°C to -35°C Capacity 23 Cu. Ft. Defrost Method Cycle Optimized, Automatic Features - Provides a spacious 23 cubic feet of storage, ideal for storing a large volume of blood-based products in compliance with FDA and AABB standards. - Features a top-mounted, variable speed compressor with a temperature setpoint range of -15°C to -35°C. - Equipped with seven standard 304 stainless steel drawers that can each hold up to 65 lbs. - Utilizes high-density urethane foam for both cabinet and door, enhancing thermal efficiency and maintaining uniform temperature. - Proportional Integral Derivative (PID) microprocessor with a clear LCD display and °C/°F switchable settings, providing precise control and easy monitoring. - Includes a full suite of alarms such as power failure, temperature sensor failure, and door ajar notifications, ensuring safety and compliance. The Corepoint Scientific NSBF231WSWCR-0 Single Solid Door Plasma Freezer is engineered to meet the rigorous standards required for the storage of blood-based products, conforming to FDA Class II medical device guidelines and AABB requirements. This plasma freezer offers a 23 cubic feet capacity and operates within a temperature setpoint range of -15°C to -35°C, ensuring optimal conditions for the preservation of critical materials. It features seven 304 stainless steel drawers that facilitate organized storage and easy access. The unit is built with high-density urethane foam insulation for superior temperature stability (+/- 0.1°C) and uniformity (+/- 0.7°C), and the exterior is finished in white powder-coated steel for durability. Mobility is enhanced with four swivel casters, front casters locking for secure placement. The plasma freezer includes a keyed door lock for restricted access, ensuring content security. Notable features include a Proportional Integral Derivative (PID) controller for precise temperature management. The freezer uses eco-friendly R600a refrigerant, aligning with EPA SNAP compliance for environmental responsibility. The dimensions of this freezer are 27.8 inches wide, 36.3 inches deep, and 81.5 inches high, and it weighs 360 pounds, making it a robust and reliable solution for any medical or laboratory setting requiring stringent blood storage regulations. INCLUDED: The Corepoint Scientific NSBF231WSW-0 -15C to -35C Single Solid Door Plasma Freezer includes: - 7 Drawers - 4 Swivel Casters - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Corepoint Scientific PRF092WWW-0 Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Fre (more)ezer Temperature Setpoint Range Refrigerator: 1C to 10C; Freezer: -15C -25C Capacity 9 Cu. Ft. Capacity 4.6 Ref/4.2 Freezer Defrost Method Refrigerator: Cycle; Freezer: Manual Features - Compact footprint with 4.6 cu.ft. refrigerator and 4.2 cu.ft. freezer optimizes laboratory floor space. - Separate microprocessor controllers with digital displays in each chamber ensure accurate temperature settings and monitoring for your critical samples. - Keyed door locks and audible/visual high and low-temperature alarms safeguard your valuable materials. - High-density urethane foam insulation and forced air circulation (refrigerator) minimize temperature fluctuations and maintain energy efficiency. - Separated refrigerator and freezer compartments for organized storage and minimized temperature cross-contamination. The Corepoint Scientific PRF092WWW-0 Solid Door Laboratory Combo is a refrigerator and freezer combination designed for laboratory use. It has a compact footprint with 4.5 cu. ft. of refrigerator space and 4.2 cu. ft. of freezer space. The unit features two solid, self-closing doors with magnetic gaskets for a positive seal and recessed handles for easy opening. The refrigerator has two adjustable shelves and one fixed shelf, while the freezer has two fixed shelves. The laboratory combo also comes with leveling legs for stability and a probe access port for external monitoring. It is made with high-density urethane foam insulation for efficient temperature retention and has a powder-coated steel exterior for durability. For added security, the unit has a keyed door lock. INCLUDED: The Corepoint Scientific PRF092WWW-0 Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - 2 Adjustable Refrigerator Shelves - 2 Fixed Freezer Shelves - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V Temperature Ra (more)nge Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 3°C (at 120°C) Chamber Volume 150L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 150L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Manufacturer: H+P Thermo Model: TELEMODUL 20 C + TELESYSTEM Stirring Drive HP 96 P/N (TELEMODUL 20 C (more)): 90425S/N (TELEMODUL 20 C): 0201442 P/N (TELESYSTEM Stirring Drive HP 96): 46102S/N (TELESYSTEM Stirring Drive HP 96): 0203940 Description: The TELEMODUL 20 C control unit is used for controlling remote-controlled magnetic stirring systems. Its interface is menu-driven. The display shows the selected speed (rpm) and gives an overview over the functions selected. You may preset speed and stirring power as well as change the stirring mode. The three program keys can be individually defined.The stirring drive gets its power from the TELEMODUL 20 C control unit. Drive and electronic control system are inside the stainless steel housing of the Telesystem Stirring Drive HP 96 which is completely watertight. This prevents germs from penetrating into the inside of the stirring drive. The drive is constructed without the use of moving parts and therefore totally wear-free. The magnetic stirring systems of the TELESYSTEM type are used for chemical, microbiological, biotechnical, pharmaceutical and medical purposes, e.g.:- Growing microorganisms (e.g. aerating and growing bacteria cultures)- Dissolving nutrient media and solids- To prevent the settling of suspended matter- Titration Specifications: - Nominal power: 24 VA- Setting range as a percentage of the nominal power: 25 / 50 / 75 / 100 % (4 levels)- Rotation speed range: 130 to 1,400 rpm- Speed constancy: ± 1 % - Stirring times: 5 sec to 60 min- Pause times: 5 sec to 60 min- Output voltage: 2x 20 Vrms - Operating voltage: 24 VDC Items delivered: - H+P Labortechnik AG TELEMODUL 20 C - H+P Labortechnik AG TELESYSTEM Stirring Drive Magnetic Stirrer HP 96- Power supply unit Condition: The both items are in very good cosmetic as well as technical condition. They are 100% functional tested and ready to be used.

The Cryogenic MDF-C2156VAN-PE Ultra Low Temperature Freezer is ideally suited for cryogenic freezing (more) and long-term storage in laboratories and no longer uses harmful CFC’s to achieve a ultra low temperature of -150ºC. The Cryogenic MDF-C2156VAN-PE is a mechanical cryogenic freezer. Temperature Setting Range: -125 to -152°C Temperature Control Range: -130 to -150°C Capacity: 231 litres Maximum Load: 207 kg Internal Dimensions (WxDxH): 760 x 495 x 615 mm Dimensions (WxDxH): 1730 x 765 x 1010 mm Weight: 318 kg

SCALES SUITABLE FOR EVERY USE The Navigator Series is perfect for general weighing applications in l (more)aboratory, industrial, education, retail, commercial, manufacturing, food and portioning environments. A powerful, rugged and multifunctional scale capable of handling a wide range of weighing applications with features such as fast stabilization time, overload protection four times its rated capacity and easy operation. - Excellent value for money - One-second stabilization to improve efficiency, productivity and throughput - Overload protection system, capable of withstanding loads up to four times higher than the nominal capacity: protect the scale from improper use. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Checkweighing: Compares the weight of a sample against the set targets. Other standard features and equipment ABS construction, stainless steel weighing pan, transport lock, menu switch and safety lock for adjustment, non-slip and adjustable feet, bubble level, mechanical and software overload/underload protection, indicator stability, low battery indicator, auto power off, user selectable print options, user selectable communication settings. MODELLI DISPONIBILI Applications Weighing, Parts Counting, Percent Weighing, Checkweighing Display Liquid Crystal Display (LCD) with backlight Operation AC adapter (included) or 4 C batteries (not included) Communication RS232, USB, or Ethernet (available as accessories) Construction ABS housing, stainless steel pan, transportation lock, slip-resistant and adjustable feet, leveling bubble Design Features Menu and calibration lock switch, mechanical and software overload/underload protection, stability indicator, low battery indicator, auto shut-off, user-selectable print options, user-selectable communication settings SUITABLE FOR ANY FIELD AND USE EDUCATIONAL: valuable overload protection system. Additionally, the portability of the Navigator balance makes it ideal for field experiments. LABORATORY: simple to clean, precise and easy to use in the laboratory. Ideal for laboratory applications such as formulation, quality inspection, testing and experimentation. INDUSTRY: Robustness, speed and accuracy, it is ideal to use in medium-light industrial applications such as paint and ink mixing, packaging, sampling and piece counting. SALES, TRADE, AND MANUFACTURING: Rugged, Portable, and Reliable. Ideal for use in shipping and receiving, retail or warehouse environments. Battery operation and counting and checkweighing modes expand the possibilities of use in hobby, inventory management, inspection and quality control. FOOD AND PORTIONING: hygiene, duration and reduced maintenance. Ideal for portioning and in pre-packaging. Units of measure such as kg, g, lb, oz, lb:oz and checkweighing and percentage checkweighing modes enhance their utility at the counter, in prep and in the kitchen.

Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37324930 Ultimate Vacuum 1 x 10-4 mbar Maximu (more)m Pumping Speed 33.0 m3h-1 Displacement 38.9 m3h-1 Features - Quiet operation ensures a more comfortable working environment, ideal for spaces where noise reduction is crucial. - Features a compact, freestanding design for flexible use across various settings without requiring additional support. - Proven reliable performance in a wide range of laboratory and industrial applications, showcasing its versatility and dependability. - Incorporates a gas ballast valve, essential for effectively pumping vapor without condensation inside the vacuum pump. - Built-in motor protection systems include cooling by an external fan and thermal overload protection that automatically resets. - Maintenance is simplified with an O-ring sealed sight glass for easy monitoring of oil levels and conditions at a glance. - Designed for effortless oil changes, featuring an oil drain port at the end of the oil box for convenient oil removal. - Facilitates easy oil top-ups through a large filling port and a recessed top, minimizing spills and maintenance time. The EM range of oil‑sealed rotary pumps – renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour – have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single‑phase or three‑phase (four pole) motor.Click Here to View Product Video INCLUDED: The Edwards E2M28 Rotary Vane Vacuum Pump, 230V, Cat. #: A37324930 includes: - Edwards Ultragrade 19 Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Speed range: 30 to 240 rpm Rotary evaporator from IKA, type RV 05 Excluding glassware, tripod and wa (more)ter bath.

F1 class standard: knob weight Nominal value: 500 g Material: stainless steel Knob weight is excepti (more)onal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW