Grant QBD4 Block Heater

'F' Series - B Medical Systems The 'F' Series Plasma Freezers offer integrated B Medical Systems mul (more)tifunction electronics, with various alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. Congelatore al plasma F381 - Capacità di stoccaggio (sacche di plasma da 350ml): 284 - Limite degli allarmi di temperatura freddo/caldo: -37°C / -27°C - Conforme a DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Elettronica multifunzione con display a 0,1°C - Struttura anticorrosione garantita a vita Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

The 'F' PREMIUM series plasma freezers are instruments of the highest quality and with state-of-the- (more)art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F401 plasma freezer - Storage capacity (350ml plasma bags): 345 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert UN 55 PA Incubator This item was removed from a university laboratory where it was surplus t (more)o requirements. The incubator powers on and is in fair cosmetic condition, with a small amount of residual wax remaining after cleaning. Temperature testing was conducted (thermometer not included). C22 Style Kettle Lead Included. Specifications:- Model: UN 55 PA - Serial No.: B215.1207

Tecan Genios Pro Multifunction Microplate Reader: The Tecan Genios Pro is a fully automatic, compute (more)r controlled Fluorescence. Luminescence and Absorbance instrument for measuring samples in a microplate. The instrument fulfills the requirements for numerous fluorescence, absorbance and luminescence applications in research and routine investigations. The filters are arranged in filter slides; four excitation filters and four emission filters respectively can be installed in the slides. Handles 6, 24, 96 and 384 well plates. Spectral range 360-700nm for fluorescence. 230-900nm absorbance spectral range. Sensitivity ≤1.5 picogram fluorescein on each well or ≤4 fmol well. The emission signal is measured by a highly sensitive PMT. Different detection techniques with one instrument change of measurement directions (top / bottom) by PC software. Thermal incubation at +5º C to + 40º C. Dual optical channels allow measurements from above or below the plate by mouse-click. Light to and from the samples is focused by a lens and high quality filters are easily accessible from the front of the instrument. Each filter slide can hold up to four filters. Orbital shaking and temperature control are standard. Plate formats: 6 to 384 well plates Absorbance Range: 230-999nm Temperature control: Ambient + 5 °C to 42 °C Shaking: Linear or orbital, 3 velocities Fluorescence Intensity Wavelength range: Excitation: 230 – 850 nm, emission: 280 – 850 nm Bandwidth: Adjustable from 2.5 nm – 10 nm below 280 nm, 5 nm – 20 nm above 280 nm Wavelength accuracy: ± 1 nm Wavelength precision: ± 1 nm Sensitivity (top reading – 384 well plate): 0.2 fmol/well Sensitivity (bottom reading – 384 well plate): 0.6 fmol/well Time Resolved Fluorescence Sensitivity (384 well plate): 60 amol/well Precision (384 well plate): 3 mP standard deviation Fluorescence Polarization Wavelength Range: 275-750nm Absorbance (96 well) Wavelength range: 230 – 999 nm Wavelength accuracy (492nm): ±/- 1% and ±/- 0.010 OD OD Wavelength precision (492nm): ±/- 10,5% and ±/- 0.005 OD OD Measurement range: 0 – 4 OD Glow Luminescence Type: Chemi or Bioluminescence Wavelength readings: 400-700nm

Magnetic stirrer heating BIOBLOCK SCIENTIFIC AM 3001 K Model: AM3001K / AMC BBS 3001K Technical char (more)acteristics: 230 V, 50-60 Hz, 625 W. Temperature range: 0…350 ºC. Rotation speed: 100-1250 rpm. Heating plate dimensions: Ø 14.5 cm. The stirrer is in good working order. Average aesthetic condition

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interfaces: 2 x RS232, USB type A and USB type B. Optionally, the balance can be equipped with 4 IN and 4 OUT. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

IKA R 3004 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Features (more) - Generates radial flow, effectively mixing material from both top and bottom - Ideal for aerating low viscosity media and homogenizing solids in liquids - Designed for medium to high speed use for versatile application needs - Compact stirrer diameter of 30 mm for focused and efficient mixing - Made from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Suitable for use within a wide ambient temperature range of 5 - 40 °C, ensuring reliability under various conditions This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3004 Blade stirrer includes: - IKA R 3004 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty