Elmi DTS-4

BINDER BF-115 incubator / drying oven with forced convection 100°C Model: BF115 Capacity: 115 liters (more) Temperature range: Room temperature plus 5 °C to 100 °C With forced ventilation Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 73 kg Tested at 37°C Year of manufacture: 2010

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -50°C to -85°C Capacity: 691 L Interior dimensions (HxDxW): 1280 x 620 x 880 mm D (more)imensions (HxDxW): 1975 x 920 x 1210 mm Weight: 376 kg

Dimensions (WxDxH): 140 x 140 x 730 mm Compartment dimensions (WxDxH): 135 x 135 x 115 (x6) mm

This JEOL EM-SHU2 Heater Control Unit was removed from a university lab where it was surplus to requ (more)irements. The unit is in good cosmetic condition but has not been tested. We were informed that it was working when last used.

This was removed from a university lab where it was surplus to requirements. The system powers up an (more)d communicates with the PC and Software. It has not been tested further. It is in good cosmetic condition with minor marks. Applied Biosystems MDS SCIEX QSTAR EliteAssy no. 1017064SN - AP10870612 Parts inside identified:-2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS1 x Leybold Vacuum Turbovac TW 250 S1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 0550009281 x Inficon VGC0231 x Spellman Unit1 x 024143 Nanospray Switch Module Pump on wheels:-MDS SCIEX Assy no. 022832, SN - 70208570839 Pump Inside unit:-Varian DS 602, Model 949-9335, SN - 245808With Varian Oil Exhaust Filter NW25 coming out of topModel - 949-9392Powers on and appears to be in working condition. Dell PC:-MDS SCIEX PN - 1018761Computer - P670 with ImageComes with Dell 17" Monitor,Keyboard & MousePC Powers on and has Analyst QS 2.0 SoftwareUsername - Administrator, No Password Spare parts & accessories:-1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 08610507071 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 3119703121 x Part 022765-B CFN 06851 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates1 x Box labelled Nano flow head with part inside1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on1 x Ionwerks TDCx81 x SCIEX PN - 1009917, SN - 000519 - Powers on1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards1 x MDS SCIEX PCB Interconnect, 022102-D, CFN2 x Boxes labelled QStar elite parts - Full of small parts2 x Leybold Vacuum TurboVac TW 690 MS1 x 024143 Nanospray Switch Module1 x 1002133 Signal Handling Module1 x Harvard Apparatus Cat no. 98-0921, SN - 148161 x Inficon VGC023, SN - 399-557 - Powers on2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS1 x Oerlikon Leybold Vacuum TW 250 S, SN - 209004514962 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 113500701221 x SCIEX Ionspray, Assy no. 017614, SN - 6560307081 x QLP 022353-A1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on7 x Gold Modules:-QPS Amplifier 1010829CCPS 1017191Lens PS 1024829QPS Exciter 1008444System Controller 1008411DACS & Vaccum Gauge 1024717HVPS 1012202 5 Folders of Manuals, service records, Hardware guides and Logbooks

A&D Weighing MF-50 Moisture Analyzer Capacity 51 g Weight Resolution 0.002g Moisture Content Ac (more)curacy 0.20 % (Over 1 g) 0.05% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MF-50 Moisture Analyzer delivers precision and reliability tailored for demanding moisture analysis needs. Equipped with advanced Super Hybrid Sensor (SHS) technology, the MF-50 ensures exceptionally accurate moisture content readings, even with minimal sample sizes. Its four selectable heating modes—standard, quick, step, and ramp—allow users to customize heating curves for varied sample types, enhancing accuracy and repeatability. Additionally, the five measurement programs (Standard, Automatic, Quick, Timer, and Manual) provide flexibility, making the MF-50 adaptable to diverse analytical needs. Designed for safety and ease of use, the MF-50 features ergonomic pan handles that prevent burns and facilitate efficient sample handling. The large, clear VFD display shows essential data such as moisture changes, action status, and measurement results in real-time, ensuring process transparency. Data storage is seamless, with an RS-232C interface that supports the WinCT-Moisture software for optimizing analysis accuracy and compliance with GLP, GMP, GCP, and ISO standards. With a robust 51 g capacity and precise moisture readability of 0.05%, the MF-50 offers top-tier performance and traceability, making it an essential tool for rigorous moisture measurement tasks. INCLUDED: The A&D Weighing MF-50 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes filters other vessels

Scilogex DS-160/T14 Saw-tooth Generator Probe The Scilogex DS-160/T14 Saw-tooth Generator Probe is a (more) specialized tool designed for use with the Benchmark D160 Homogenizer, specifically for homogenizing samples in a volume range of 100 to 1000ml. With dimensions of 14mm x 130mm, this generator is a 14 mm saw tooth attachment that fits easily onto the homogenizer. The saw tooth design ensures efficient and thorough homogenization of samples, while the length of the generator allows for homogenization of larger sample volumes. INCLUDED: The Scilogex DS-160/T14 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corepoint Scientific FF201WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer Temperature Set (more)point Range -15°C to -25°C Capacity 20 cu. ft. Defrost Method Manual Features - EPA compliant high density urethane foam insulation - Magnetic door gasket for positive seal - Keyed door lock - Microprocessor temperature controller with digital temperature display - Touch screen digital temperature display with user friendly interface - Active temperature scale bar display - Digital 24-hour temperature chart Flammable storage freezers meet the requirements of NFPA 45 and NFPA 30 for cold storage of flammable and combustible materials in unclassified laboratory locations. Utilizes non-sparking and/or ATEX rated components to ensure an intrinsically safe interior for flammable materials in sealed containers. These units feature temperature alarms, keyed door locks, interior shelving, probe access, and microprocessor temperature control. Our freezers showcase elite features including state-of-the-art touchscreen controllers, advanced alarms and data logging capabilities and unparalleled temperature control. All units run on natural, hydrocarbon refrigerant for environmental health and energy efficiency. INCLUDED: The Corepoint Scientific FF201WWW-0MHCTS -15C to -25C Flammable Material Storage Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty