WTW inoLab Multi 9630 IDS Multiparameter Benchtop Meter

This Protein Simple FluorChem E Imaging System was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and the camera is working, but the lab confirmed the system has a hard disk error. We found it to have issues with he white light LED, the focus drive and the stepper motor. It is in otherwise good cosmetic condition with minor marks. Sold for spares/repairs

This Vysis VP 2000 Processor Genetic Analysis System was removed from a university lab where it was  (more)surplus to requirements. Model: VP 2000 ProcessorSerial#: 30905 The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility.

Yamato BOA-201-115V Large Capacity Oil Bath 37L, 115V Temp. Control Range RT+10~200°C Temp. control (more) accuracy ±0.1°C (at 200°C Silicone Oil) Bath capacity ~37L Features - Advanced supportive functions - Standard equipped with external alarm output, temperature output terminal (4~20mA, 1~5V adjustable) RS485 communication function, key lock function, calibration offset function - Triple overheating prevention function (heater shuts off automatically at set temperature + 6°C, overheating prevention device, independent overheating prevention device) - Emergency stop switch. Forces cut off of the overcurrent circuit in case of emergency - Float switch for empty boil prevention and oil overflow prevention - Operation panel is protected by glass from liquid dripping - Large operation lamp lighting during operation for attention - Self diagnostic function, overheat prevention device, over current leakage breaker, key lock function, power failure compensation function Large capacity 37L oil bath with temperature control range of ambient +10~200°C. and high temperature distribution accuracy by adopting jet stirring method. Equipped with 3 overheating preventors (heater cut off automatically when reaching setting temperature + 6°C, overheating preventor, individual overheating preventor). Standard equipped with emergency stop switch. Forces cut off of the overcurrent circuit in case of emergency. Float switch for empty boil prevention. Float switch for oil overflow prevention. Glass control panel protect from liquid dripping. Large operation lamp lighting during operation for attention. Self diagnostic function, overheat prevention device, over current leakage breaker, key lock function, power failure compensation function. Advanced supportive functions: external alarm output, temperature output terminal (4~20mA, 1~5V adjustable) RS485 communication function, key lock function, calibration offset function. INCLUDED: The Yamato BOA-201-115V Large Capacity Oil Bath 37L, 115V includes: - Shelf and Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station - NW40 200-240V Ultimate Pressure <5 x 10-8 mbar Inlet Co (more)nnection NW40 Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Dry Turbo Station - NW40 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

GETINGE 1345 thermodesinfector – Short processing times – Everywhere easy to install – Small size (H (more)xWxD): 505 x 500 x 643 mm. – Large Room: 300 x 435 x 485 mm.

Perkin Elmer Universal Crimper Press Lab This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and in good mechanical order.

Silverson L4R High Shear Homogenizer Lab Mixer Emulsifier Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order. It is in reasonably poor cosmetic condition.

Memmert HPP1060eco Climate Chamber 1060L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 1060 L (37.4 cu. ft.) Features - Generous volume capacity of 1060 L (37.4 cu. ft.) for versatile climate and stability testing - Temperature range settings from +5 to +70°C with humidity, and 0 to +70°C without humidity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for reliable performance - Humidity range adjustable from 10% to 90% RH with efficient hot steam generator and Peltier dehumidification - Intuitive TwinDISPLAY ControlCOCKPIT featuring two high-definition TFT-color displays - Multi-language settings with support for German, English, Spanish, French, Polish, Czech, and Hungarian - Durable stainless steel door with 2-point locking and interior glass door for added insulation - Convenient data programming and management with AtmoCONTROL software via USB or Ethernet The Memmert HPP1060eco Climate Chamber 1060L, 115V is expertly designed to provide consistent and precise environmental conditions for sensitive testing applications. With a spacious 1060 L (37.4 cu. ft.) interior, it offers ample space for extensive climate and stability testing needs. Its temperature range spans from +5 to +70°C with humidity and 0 to +70°C without humidity, providing versatility for a wide array of research and material testing scenarios. The highly accurate 0.1°C temperature setting resolution, powered by dual Pt100 sensors, ensures reliable readings and consistent conditions essential for exacting scientific requirements. The HPP1060eco integrates cutting-edge control technology with its TwinDISPLAY ControlCOCKPIT, featuring dual high-definition TFT-color displays for real-time monitoring and adjustments. Designed with an energy-efficient Peltier heating and cooling system, it utilizes advanced humidification by hot steam generator and Peltier-driven dehumidification, delivering dependable humidity control within a range of 10 to 90% RH. Programmed and managed through AtmoCONTROL software, accessible via USB or Ethernet, this climate chamber also includes AutoSAFETY temperature protection, visual and acoustic alarms, and built-in self-diagnostics. Ideal for ICH-compliant stability testing and environmental simulations, this durable, stainless-steel chamber ensures reliability, precision, and performance in any lab setting. INCLUDED: TheMemmert HPP1060eco Climate Chamber 1060L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.