Witt Gastechnik KM100-3ME Gas Mixing Unit

Ohaus 30400156 Modular Combination Heat Block, 6 mm, 12/13 mm, 25 mm Tubes The Ohaus 30400156 Modula (more)r Combination Heat Block, 6 mm, 12/13 mm, 25 mm Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400156 Modular Combination Heat Block, 6 mm, 12/13 mm, 25 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries Digital Disruptor Genie Ideal for cell disruption or sample resuspension effic (more)iency, affordable alternative to expensive ultrasonic disruptors, holds up to twelve 1.5ml or 2.0ml microtubes (snap-top or screw-cap). Digital.INCLUDED: The Scientific Industries SI-DD38 Digital Disruptor Genie includes: - Universal Microtube Holder (tubes not included) - Pop-off Cup - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series The Hermle 24 x 1.5/2.0ml rotor is (more) a hermetically sealed rotor designed for use with the Hermle Z216 series centrifuge. With a maximum speed of 15,000 RPM and a maximum RCF of 21,379 x g, this rotor can accommodate up to 24 1.5/2.0ml tubes at a 45° angle. The hermetically sealed design of the rotor ensures that samples are protected from contamination during centrifugation, making it an ideal choice for applications where sample purity is critical. INCLUDED: The Hermle 24 x 1.5/2.0ml Rotor, Hermetically Sealed, for Z216 Series includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 1456XL Large Paraffin Wax Dispenser, 28 Liter, 115V Capacity 28 Liters / 7.4 Gal (more)lons Temperature Range Ambient+5°C to 65°C Tap Height 9" from Base Features - Industries largest wax capacity for high throughput use - Quickly Melts – from pellets to molten wax in as little as 4 hours! - Hot Start feature will automatically start the warming based on set time to eliminate waiting - Bright easy to use digital display - Stainless steel lid and wax chamber to resist corrosion - Heated and filtered wax spigot to keep the wax flowing quickly - Two-year Warranty - UL, CE, CSA approved This Boekel Scientific Large Wax Dispenser can be used as the primary source of paraffin wax or to supplement tissue processors and embedding centers. This unit has a maximum capacity of 28 liters (7.4 gallons) of wax and is the largest in the industry. The system has a heated and filtered spigot to make sure wax freely flows during operation. The advanced control system has a Hot Start warmup feature to ensure there is no waiting for melted paraffin wax. The unit has a stainless-steel lid and chamber to stay corrosion free for years of use. Boekel Scientific is known worldwide for manufacturing high quality equipment and all histology equipment is designed and manufactured in the U.S.A and supplied with a two-year warranty.INCLUDED: The Boekel Scientific 1456XL Large Paraffin Wax Dispenser, 28 Liter, 115V includes: - Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Amersham Biosciences Ettan Spotter, Various Parts & Accessories This was removed from a universi (more)ty lab where it was surplus to requirements. The unit has been tested and works well. A Windows XP PC with Ettan Digester software is included. It is in good cosmetic condition with minor marks Included are; Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2 215 Utility Programs Ettan Spotter Test Procedure Ettan Spotter Instrument Handbook Ettan Spotter User Manual Ettan Spotter Safety Handbook Ettan Digester Control Software 1.10 Calibration Plate Calibration Tool Distance Tool 215 Level Sensor Cable Assy Fuse, 2.5 amp T-2.5 Clip, Extruded Cable/Tubing Fuse Drawer 110/120V Coupling 1/4-28, PVDF Shielded Gsioc Cable 30"

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.