WAB TURBULA® T2F three-dimensional Shaker Mixer Schüttlermischer

The radiomatic model 515 is a high performance flow scintillation analyzer for the qualatative and q (more)uantatative monitoring of single and dua labeled radioisotopic samples. It presents a unique combination of state-of-the-art scintillation counting technology and interchangeable beta/gamma/positron emmission detectors.

The tried-and-tested concept of MELAseal 100+ provides a reliable solution for your packaging proces (more)s. The sealing device combines performance with functionality: Seal transparent sterilization packaging without pause after a pre-heating time of only four minutes. The integrated electronics of the device monitors the sealing temperature and time. The acoustic and visual signal facilitate the evaluation of the seal seam quality. The individually adjustable thermostat permits the fl exible use of versatile sterilization packaging. MELAseal 100+ with a 10 mm seal seam width significantly exceeds the prescribed width of 6 mm required by EN 868-5, thus guaranteeing additional safety. Device type: Bar sealing device Validatable: No Pre-heating time: 200 sec Sealing duration/speed: 4 sec Temperature range: 100 – 210°C Seal seam width: 10 mm Seal seam length max: 275 mm Integrated cutting unit: yes Dimensions (WxDxH): 415 x 240 x 1500 mm Weight: 5,4 kg

Scilogex DS-500/5 generator Flat head-open slot, 60mm immerse length for solid/liquid media, volumes (more) 1-50ml. Used in conjunction with the Scilogex D500 Homogenizer.INCLUDED: The Scilogex DS-500/5 generator 5mm dia. generator includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience SD28R-30-A11B 28L Refrigerated Circulator, Standard Digital (-30 to 170C), 120V, 60HzPol (more)yScience Circulating Bath with Standard DigitalTemperature Controller. Extremely easy to use and maintain, it combines designinnovation with highly intuitive operation to deliver convenient and reliableliquid temperature control for a wide range of applications.Features Large, universal icon and English display Swivel 180™ Rotating Controller On-board connectivity: RS-232 serial output On-screen prompts Automatic performance optimization Single-point calibration capability INCLUDED: The Polyscience SD28R-30-A11B 28L Refrigerated Circulator, -30°C to 170°C, 915W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 The Eppendorf F-35-6-30 Rotor with lid accom (more)modates 6 x 15/50ml samples, reaching speeds up to 7,830 RPM with a max RCF of 71,970 x g. This fixed-angle rotor F-35-6-30 is for Eppendorf 5430 and 5430R centrifuges. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 SpecificationsMax Speed7830 RPMMax RCF71,970 x gMax Capacity6 x 15/50 mLRadius9.5 cmAngleFixed

This listing is for 1 of 2 QuattroFlow QF15ACUEGN-UK Single-use Pump Diaphragm Pump. The unit is in (more) full working condition and is ready for immidate realese. The QuattroFlow QF150 Diaphragm Pump is an efficient, 4-piston pump designed for handling water-like fluids in various sectors, including pharmaceuticals, biotech, food, and cosmetics. Here’s a detailed overview of its features, specifications, and applications: Key Features: Flow Rates: Max Flow Rate: 3° Eccentric Shaft: Up to 100 l/h (1.67 l/min) 5° Eccentric Shaft: Up to 180 l/h (3 l/min) Min Flow Rate: Both shaft angles start at 1 l/h (0.017 l/min). Pressure Ratings: Maximum operating pressure of 6 bar (87 psi) for fluids < 40°C; 4 bar (58 psi) for fluids > 40°C. Temperature Ratings: Maximum fluid temperature: 80°C (176°F). CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable up to 90°C (194°F) and 130°C (260°F), respectively. Suction Lift: 3° Shaft: 1-1.5 m (3.2-4.9 ft) 5° Shaft: 2-3 m (6.6-9.8 ft) Volume Specifications: Approximate volume per revolution: 3°: 0.72 ml 5°: 1.2 ml Total filling volume (without connectors): 15 ml. Material Construction: Wetted Materials: SS316L (pump housing, valve plate), Santoprene (diaphragms), EPDM (valves, O-rings). Non-Wetted Materials: SS316L for bearing housing and base plate. Dimensions and Weight: Length: 257 mm (10.2 in); Width: 164 mm (6.5 in); Height: 185 mm (7.2 in); Weight: 9.8 kg (22 lb). Slight variations in dimensions and weight depending on models. Advantages: Versatility: The QF150 can handle a wide range of fluids, including: Biological Solutions: Proteins (e.g., IgG, monoclonal antibodies), enzymes, and vaccines. Suspensions and Polymers: Silicon, latex, and chromatography media. Cell Suspensions: Bacteria, yeast, algae, and mammalian cells. Food Products: Dairy products and gelatine. Low-Shear Design: Ensures gentle handling of sensitive materials, maintaining their stability and functionality. CIP/SIP Capable: Facilitates easy cleaning and sterilization, crucial for maintaining hygiene in production environments. Compact and Lightweight: Easy to integrate into laboratory or production settings without occupying much space.

Front aperture (work mode)(HxL): 165 x 1800 mm Front aperture maximum height: 350 mm Dimensions (wit (more)hout support frame and filter unit)(LxDxH): 1943 x 844 x 1552 mm Height with support frame: 2297 mm Interior dimensons (LxDxH): 1800 x 605 x 725 mm Work area(LxD): 1719 x 440 mm Weight (without support frame and filter unit): 315 kg

This Beckman Coulter Biomek 4000 High Precision Liquid Handling System was removed from a university (more) lab where it was surplus to requirements. All the units are in very good used cosmetic condition but they do have various signs of general use. The system has been powered up and connected to the PC. We were able to get the head to go to the home position and all of the bays using the Biomek 4.1 software. It seems to be working as intended. The lab also said it was fully operational prior to removal. The system consists of: 1 x Beckman Coulter Biomek 4000 Main Unit.1 x Beckman Coulter P200L Tool 1-Tip.1 x Beckman Coulter P20 Tool 1-Tip.1 x Beckman Coulter MP20 Tool 8-Tip.1 x Beckman Coulter P/N 609119 5 Tool, Tool rack. 1 x Lenovo PC with Keyboard, LG Monitor and Dell Wireless Mouse.The PC contains Biomek 4.1 software. Various cables to connect the system up.

Yamato MB-800-115V Magnetic Stirrer 70~1200 Rpm 115V with External Transformer. Suitable For Bo500 O (more)il Bath. Top Plate Material Aluminum Top Plate Dimensions W250×D270 mm Stirring Capacity 100 ~ 10000 ml Features - Chemical-proof, anodized aluminum finish top plate - Employs a magnetic stirrer bar to agitate solutions - High-powered electronic controlled AC motor which provides stable - rotation - Power supply to the outlet for oil bath can be cut off and stopped when - the temperature of the bottom of the oil bath reaches the specified value - Suitable for BO500 oil bath Magnetic stirrer equipped with optimum heat prevention function for oil bath. 70 to 1200 rpm. Comes with external transformer. Suitable for BO-500 oil bath. 115V. INCLUDED: The Yamato MB-800-115V Magnetic Stirrer 70~1200 Rpm 115V with External Transformer. Suitable For Bo500 Oil Bath. includes: - Magnetic stirrer bar 40mm 1pc - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7&rdquo; TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software &quot;LABEL EDITOR&quot;, and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.