Thermo Scientific Accela HPLC Pump + Degasser 60057-60010 (2009)

Alsident arm for point extraction of vapours/gases.

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/8” (3mm) Intensity Ultra High Ampl. Range 116 - 494 Volume 0.25 – 10ml

CS 60 A+B (ACID+BASIC) BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in  (more)HD PVC - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL round bucket 4x Eppendorf insert for 4 round bottom tubes

This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it (more) was surplus to requirements. The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs. It is in reasonably good cosmetic condition with minor marks.

This Leica Reichert Ultracut S Microtome & Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound. Leica Reichert Ultracut SType - 702501SN - 420699 StereoZoom 6Zoom Range 0.67X - 4.0X 2 x Eye Pieces 15X W.F. Stereo (31-05-62) ControllerType - 654901SN - 89465

Labconco Fast-Freeze 45 Adapter (Stainless Steel)Fast-FreezeFlasks attach with adapters to valve por (more)ts on Labconco Drying Chambers andManifolds. Choose borosilicate glass or stainless steel adapters in 1/2"and 3/4" diameters. Click Here to View Product Video INCLUDED: The Labconco 7547400 Fast-Freeze 45 Adapter (Stainless Steel) includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty