Telstar IF150 Ice Flake Machine

The Pallchek™ Rapid Microbiology System is the first of its type to be used in an approved protocol  (more)for microbiological applications in FDA and EMEA registered drug manufacturing processes, using the ATP bioluminescence technique. The Pallchek system can be used as a much faster alternative to conventional microbiological quality control methods, or may be used to supplement existing methods. It is also a much lower cost, more convenient option than all other rapid microbiological test methods, with equivalent or better sensitivity. Excl. accessories See PDF for more info: 5656

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Labconco 12-Port Drying chamber, PTFE-coated 12-port drying chamber made of type 304 stainless s (more)teel with corrosion-resistant PTFE-coated interior Includes arcylic lid with neoprene gasket, latching pin, and 12 neoprene valves with molded plastic knobs for 1/2 in. & 3/4 in. adapters For use with FreeZone™ 1, 2.5, 4.5, 6, 8, 12, or 18 Liter Freeze Dryers INCLUDED: The Labconco 7522801 12-Port Drying chamber, PTFE-coated includes: - Neoprene Valves x 12 (accomodates 1/2" & 3/4" adapters) - 1/2" Thick Acrylic Lid with Neoprene Gasket - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo FT900 Immersion Cooler, 115V/60Hz Working Temperature Range -90°C to 30°C Refrigerant R404A/ (more)R23 Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT900 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CP-1001F Refrigerated Circulator, 230V/50-60Hz Working Temperature Range -38°C to 100° (more)C Cooling Capacity 1000W at 20°C Refrigerant R449A Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB & RS232 connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 The CORIO™ CP refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperatures between -20°C to -50°C with an upper limit of 200°C. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. USB and RS232 connections for external PC control and data-logging. A space-saving cooling coil design yields more usable space in the bath tank. Bath lid and drain tap included. PID temperature control provides ± 0.03°C stability. Adjustable centrifugal pump capacity of 8…27 L/min with pressures 1.5…10.2 psi. Stainless steel bath tank. Class III (FL) according to DIN 12876-1. Click Here to View Product Video INCLUDED: The Julabo CORIO CP-1001F Refrigerated Circulator, 230V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 20 x 10ml High Speed Rotor The Hermle 20 x 10ml High-Speed Rotor is a centrifuge rotor that c (more)an be used with Hermle Z32-HK, Z36-HK, Z327, Z366, and Z446 series centrifuges. This rotor can accommodate up to 20 tubes of 10ml each and has a maximum speed of 12,000 RPM, which can be increased to 16,000 RPM with the Z36-HK centrifuge model only. It generates a maximum relative centrifugal force (RCF) of 15,775 x g or 28,045 x g with the Z36-HK centrifuge model. The rotor has a maximum radius of 9.8 cm and a 30° angle to ensure proper and even sample distribution. With its high speed and large capacity, this rotor is ideal for processing many samples in a short amount of time, making it useful in various applications such as biochemistry, microbiology, and molecular biology. Its compatibility with multiple Hermle centrifuge models makes it an extremely versatile tool. INCLUDED: The Hermle 20 x 10ml High Speed Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SARTORIUS EA6DCE-I precision balance 6000g / 0.2g Laboratory balance Weighing capacity: 6000g (6kg)  (more)Readability: 0.2 g Linearity: 0.4g Calibration Weight: 5 kg Weighing pan dimensions: 30.4 x 22.8 cm Tested at 100g / 2kg / 5kg In good condition

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Equipped with non-slip rubber mats on the shelves.

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel This was removed from a univ (more)ersity engineering department where it was surplus to requirements. The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling. It is in five sections: Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor. Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters. Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm. Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal. Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 100 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

The HX7.4P2 C is a powder coated beam scale equipped with the PUE HX7 indicator. This 4-load-cell me (more)chanical design can be used in a wider range of applications when compared to the standard pallet solutions. Beam spacing allows to place any loads onto the scale using either a forklift or a transporter crane. Transport-supporting handles facilitate transfer of the device to the place of use. The indicator has been outfitted with a colour 7" graphic display and a diode bar graph which via red and green lights presents the current load mass referred to the scale range or preset minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.