Stainless Steel Cabinet

S+B Plinth cabinet door LT White 600

Hermle 30 x 1.5ml Rotor, Hermetically Sealed The Hermle Rotor, 30 x 1.5/2.0ml Hermetically Sealed is (more) designed to fit the Z327 model centrifuge, this rotor is capable of spinning up to 30 tubes at once, each with a capacity of 1.5 or 2.0 ml. With a maximum speed of 13,000rpm/17,758xg (or 14,000rpm/20,505xg with the -K version), the Hermle rotor provides efficient and reliable sample separation, ensuring precise and reproducible results. The hermetically sealed design of this rotor prevents any leakage or contamination during the centrifugation process, ensuring the safety of users and the integrity of the samples. Whether you are working with biological samples, cell cultures, or other research materials, the Hermle Rotor provides a reliable and efficient solution for your laboratory centrifugation needs. The Hermle 30 x 1.5 Rotor is for use with the Z327 and Z327 K centrifugesINCLUDED: The Hermle 30 x 1.5ml Rotor, Hermetically Sealed includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 1 x 1.4ml Adapters, Cat. # 022639285 New in box Eppendorf 1 x 1.4ml Adapters, Cat. # 02263 (more)9285, for A-4-38 rectangular buckets for Eppendorf 5702 centrifuges. These adapters fit 5 tubes per adapter; 20 tubes per rotor. Maximum tube length without a cap is 100mm; with an aerosol tight cap maximum tube length is 100mm. Adapter bore diameter is 8.5mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 1 x 1.4ml Adapters, Cat. # 022639285 includes: - Full 6 Month Parts and Labor Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Alpha Series - Cooling thermostats with essential functions LAUDA Alpha offers reliable technology a (more)nd modern design for temperature ranges from -25°C to 100°C. This line of devices is suitable for internal and external thermostats with non-flammable liquids (water and water / glycol). Thermostats are the perfect solution for most laboratory temperature control applications. Reduced to the most essential functions, this product line will win you over for its reliability and ease of use. Under / over temperature alarm; countdown function; drain screw; 1 point calibration The RA 8, RA 12 and RA 24 cooling thermostats have a tank lid and pump connections as standard, helping refrigeration across the entire temperature range from -25 to 100°C. Finally, automatic compressor control extends compressor life and offers savings on operating costs. Examples of specific applications - Preparation of samples in chemistry and pharmacy - Functional tests of electronic components - Test of sliding bearings - Beer forcing test - Valve test - Stress test - Bending test of the notch - Expansion test - Brookfield test - Semiconductor coating Notable features - Cost savings thanks to automatic compressor control: cooling capacity is provided only when it is needed - Easy cleaning of the cooling air inlet by simply removing the front cover without tools - Stainless steel tank - Connection of the drain on the rear Graph of cooling performance of RA Alpha Lauda cryostats. Pump performance graph. TECHNICAL VISUALIZATION 1 - Control head 2 - Pump connections: return to bath and pump outflow 3 - Bath cover 4 - Handle on front and back 5 - Removable front cover 6 - Grille on both sides 7 - Four mounting feet 1 - Mains cable 2 - Rating label 3 - Cooler cable 4 - Bath drain nozzle

Bartington MS2WF Magnetic Susceptibility System This system was removed from a university laboratory (more) where it was surplus to requirements. The units power on and are in good condition with minimal wear. The pumps function correctly, but an alarm sounds on the MS2WFP PSU. Additionally, the system is missing the MS2 meter and probe.Therefore, this system is listed as Spares/Repair. Specifications: - MS2WFP Power Supply Unit - Model: MS2WFP - Serial No.: 134 - MS2WF Furnace - Model: MS2WF - Serial No.: 134 - MS2W Sensor - Model: MS2W - Serial No.: 150

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Overhead track scale H315 series is designed for weighing half carcass and porkhalf which are transp (more)orted on scale’s track. The weighing process starts when a roller with measured load enters a measuring section of the track. The load cells are installed lengthwise to the weighing track which is fixed with spherical mandrels. Such design eliminates tensions in the construction. Scales can cooperate with carcass grading equipment. The H315 series is manufactured either in galvanized or in stainless steel version, as dual range weighing instruments. They are equipped with a stainless steel backlit LCD indicator PUE H315 installed on a cable.

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 50 g) Wooden box Number of piec (more)es in the set: 8 weights 1 g i 2 g – solid masses without adjusting chamber