Radwag PT0439.5 Cable

RS 232 cable: scale (PUE C/31/H terminal) - computer. Lenght 10 m. Cable types: Standard P0259.2: 2  (more)m Customized P0259.5 (extra charge): 5 m Customized P0259.10 (extra charge): 10 m Compatible with: Scales operated via PUE H315 terminal Scales operated via PUE H315/Z terminal PUE H315 terminal PUE H315/Z terminal

Labconco Glass Liquid Trap Liquid Trap prevent liquid from entering the pump. LiquidTrap, is placed  (more)between the RapidVap and diaphragm pump to prevent liquids fromentering the pump when using high boiling point solvents. Consists ofborosilicate glass container with 2550 milliliter trapping capacity, two1/2" diameter stems with elbows, foam insulation lid, and epoxy-coatedsteel bracket with hooks that allow the trap to hang on the side of theRapidVap Vacuum System. Alternatively, the bracket serves as a stand tostabilize the glass container resting on a flat work surface. This trap mayalso be used with pre-2005 CentriVap Cold Traps. INCLUDED: The Labconco 7873400 Glass Liquid Trap includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Coated Glassware Set G5BDry Ice condenser for low-boiling solvents - With transparent plast (more)ic coating - suitable for a temperature range up to max. 80 ° C - Glassware set includes one 1,000-ml evaporating flask and one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints - Ventilation cap without ground joints for easy handling and grease-free operation included - A venting valve with refill function is optionally available - Not suitable for the automated distillation program Dynamic AUTOaccurate on Hei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhlet extraction and descending condenser system INCLUDED: The Heidolph Coated Glassware Set G5B includes: - G5B Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty

Powder-coated steel cart supports FreeZone benchtop and Triad Freeze Dryers during use, storage, or  (more)transportation. Lower shelf provides space for vacuum pump. Casters provide mobility. Maximum weight capacity of 200 kg. Dimensions: 711 x 711 x 820 mm Weight: 55 kg

Multisizer 3 Coulter Counter, with Aperture 70 µm and 100 µm. Complete with waste and Isoton plastic (more) reservoir left, original Beckman map and 12 chapter manual. No software available, but can be requested from Beckman.

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

RS 232 cable: Balance - computer. Standard cable length: 1.7 m. Compatible with: - Scales with PUE C (more)315 terminal - PUE C315 terminal

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

IKA MultiDrive control Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing range 5 -  (more)4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Regardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. MultiDrive control mixes, grinds and is also fitted with a dispersion vessel and a disposable tube. There is a USB interface available for easy actuation and documentation respectively. High performance Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval operation The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling A cooling system is integrated in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display A clear TFT-display guarantees user-friendly operation. Temperature measurement MultiDrive control offers temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function The weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required. Variety of vessels (accessory) MultiDrive provides the right vessel for each grinding task. Vessels don't belong to the scope of delivery.INCLUDED: The IKA MultiDrive control includes: - IKA MultiDrive control - Socket wrench - Disassembly tool 1 - Disassembly tool 2 - Cleaning brush - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

ELD500 Max. Measurement < 5x10-12 Cooling Method Forced Fan Max. Inlet Pressure 15 mbar Features  (more)- Color touch screen control with local graphical display and audible leak detection. Wireless models allow simultaneous control of up to 10 leak detectors. - Low weight and integrated carry handles which allow it to be bench top or trolley mounted. - Measurement of leaks for Helium of < 5x10-12 mbar ls-1 in vacuum mode and < 7x10-9 mbar ls-1 in sniffer mode. - ELD500 version with an integrated oil sealed rotary vane pump - ELD500 DRY version with an integrated helium optimised diaphragm pump - ELD500 FLEX version without a primary pump - Partial flow kit allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants. - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface. - Ensured by class leading 180° mass spectrometer. The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 DRYThe ELD500 DRY version uses a small diaphragm backing pump. This is the preferred choice when the ELD500 is operated in very clean processes where contamination needs to be avoided.INCLUDED: The Edwards ELD500 DRY - 200-240V 50/60Hz Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty