Radwag PT0439.10 Cable

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-37666 Perkin Elmer AutoSystem XL GC ITEM-37678 Pulsar Extreme 3000 Mge Ups SystemsITEM-37681 Pulsar Extreme 3000 Mge Ups Systems ITEM-37675 Edwards Plate Degasser PD3ITEM-37699 482 CO-OximeterITEM-37740 Biotage Flashmaster Personal Chromatography Stand System ITEM-37741 Barnstead STEM Cat No. RS 10 PSU ITEM-37742 Matrix Technologies Memowell ITEM-37746 Type R1 Water bath without top unit ITEM-37749 Olympus Tokyo 200481 MicroscopeITEM-37751 BERTHOLD TECHNOLOGIES - CentroPRO LB 962 ITEM-37752 Shimadzu Sipper Unit 160L Type L ITEM-37754 TTI 1604 40,000 count digital Multimeter ITEM-37757 Bio Rad CriterionITEM-37758 Farnell Instruments Stabilised Power Supply ITEM-37759 DaRo UV systems ITEM-37761 Sartius Tandem Model 1082 ITEM-37762 Rodwell Revotherm Hotplate Magnetic Stirrer ITEM-37763 Gallenkamp Ultraviolet LampITEM-37765 IKA RCT Classic ITEM-38559 Wessington Cryogenics DF Series Dewar ITEM-37598 Alcatel 2008A Rotary Vane Vacuum Pump ITEM-37785 CTC analytics CTD-A200S AutosamplerITEM-37786 Finnigan Mat GCQ Used Spare Parts

Accuris PR1000-6000 Taq Polymerase, 6000 Units Engineered for controlled polymerase activity, Accuri (more)s Hot Start Taq is bound with a monoclonal antibody that blocks enzyme activity. This allows reactions to be set up at room temperature without the risk of non-specific amplification.When samples are ready, the reaction mixture is heated to 95°C to denature the antibody and initiate the reaction. Similar to the standard Accuris Taq, Hot Start Taq is provided with a 5X buffer, or in a ready to use 2X Master Mix. The Master Mix can be ordered with or without an incorporated red gel loading dye. The Red Dye Master Mix incorporates a red loading dye that allows amplified samples to be loaded directly on an agarose gel. The red color aids in visualization during pipetting, and higher density of the buffer ensures that the samples will drop into the gel wells. INCLUDED: The Accuris PR1000-6000 Taq Polymerase, 6000 Units includes: - Accuris Taq DNA Polymerase 6000u 6000u (5u/µl) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Scientific ThermoFlex 900 Recirculating Chiller LabModel: ThermoFlex 900 101163010000001 This (more) item was removed from a university where it was surplus to requirement. It is in good cosmetic condition and in good working order.

Memmert IF450plus Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 449 L (15.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF450plus Forced Circulation Incubator 449L, 115V provides precise temperature control with a working range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, making it an ideal solution for sensitive laboratory applications. With a large 449 L (15.9 cu.ft.) stainless steel chamber, this incubator offers ample space and is designed for durability and easy cleaning. The TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller features dual high-definition TFT-color displays, enabling precise adjustments of temperature, fan speed, and other critical parameters. Equipped with AutoSAFETY features, the IF450plus offers over- and undertemperature monitoring along with a mechanical temperature limiter TB for enhanced safety. The forced air circulation system allows for fan speed adjustments in 10% increments and includes a pre-heated fresh air admixture for consistent performance. The Function SetpointWAIT ensures that the process only begins when the set temperature is reached, ensuring reliable outcomes. Additionally, the fixed sterilization program provides thorough chamber cleaning at 160°C for 4 hours, ensuring a hygienic environment for sensitive experiments. INCLUDED: The Memmert IF450plus Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Effective and Excellent Measurement The NANO.AK-4/500.5Y automatic nano mass comparator enables dete (more)rmining mass deviations of weights with the minimum possible operator participation. The comparator allows to compare weights of mass ranging between 0.05 mg to 500 mg. Excellent Measurement Repeatability NANO.AK-4/500.5Y automatic nano mass comparator, due to the elimination of the human factor, temperature changes and air drafts, guarantees excellent measurement repeatability when compared to manual mass comparator. Design and Functionality An element that controls mass comparator operation is a digital management module, which is placed inside comparator’s chamber along with an automatic mass standard feeder. Mass comparator is operated by means of indicator connected to the comparator controller. Control elements are not mechanically integrated with the construction thanks to what the influence of ambient conditions on mass comparator chamber is significantly reduced. Dedicated Software Specially designed RMCS computer software enables comprehensive realisation of calibration procedures in laboratory. The system manages the whole calibration process, starting from the moment the order is placed, through proced

IKA Oven 125 Basic Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 250 °C Opera (more)ting Area Inner chamber 550 x 525 x 450 mm Features - Temperature range: RT + 5°C to 250°C - Capacity: 125 l - Electronically adjustable ventilation - Clear display and control menu - Key lock function - Timer - Adjustable temperature limit Universal oven for tempering, drying, aging and heatingapplication in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools /universities, research, quality control and science. Fast heat up times and a precise temperature control guarantee reproducibletest results. A special odorless insulation also ensures lower operating costs. The oven can be controlled by USB and test parameters can be recorded forfurther analyses. INCLUDED: The IKA Oven 125 Basic Drying Oven includes: - IKA Oven 125 basic dry - Wire grid tray, chrome plated (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Basic Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 250 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature display yesTimer yesTimer display 7 segment LEDTime setting range1 - 144000 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight74 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20USB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1550 WPower input standby1 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) Particularly in the case o (more)f applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. You can find out more about this here. The VISCO JET® 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, and ideal volume: 1,90 -6,300 ml. This VISCO JET® 80 is made of POM plastic and can be used up to max. 90°C. A polyamide coated stirrer shaft with a diameter of approximately 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300490 Overhead Stirrer Visco Jet Impeller inoJET, 80mm (POM) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Eppendorf Rectangular Buckets for A-4-38 - 90 ml The Eppendorf A-4-38 rectangular bucketshave a max (more)imum capacity of 90 ml. You can spin at a maximum speed of 4400rpm and a max of 3000 x g RCF. The buckets are autoclavable at 121 °C (250 °F) for 20 minutes. INCLUDED: The Eppendorf Rectangular Buckets for A-4-38 - 90 ml includes: - Full 6 Month Parts and Labor Warranty