Radwag PT0303.10 Cable

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Malvern Panalytical NanoSight NS500 instrument provides an easy-to-use, reproducible platform fo (more)r nanoparticle characterization. The NS500 provides detailed and intuitive analysis of the size distribution and concentration of all types of nanoparticles from 10nm to 2000nm in diameter, depending on the instrument configuration and sample type being analyzed. Single particle zeta potential measurements on the NS500 provide inherent high resolution zeta distributions which can be measured simultaneously with other NTA measurements parameters like size, particle concentration and can even operate whilst in fluorescence mode. Light source: 405nm (violet), 488nm (blue), 532nm (green) or 642nm (red) Size range: 10 nm – 1000 nm Particle concentration: 10⁶ to 10⁹ particles/mL Minimum sample volume: 250 μL Dimensions (WxDxH): 530 x 250 x 400 mm

Polyscience AD15R-40-A11B 15L Refrigerated Circulator, Advanced Digital (-40 to 200C), 120V, 60Hz3D  (more)Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD15R-40-A11B 15L Refrigerated Circulator is intended for the precisetemperature control of suitable liquids in a reservoir. Extremely easy to useand maintain, it combines design innovation with highly intuitive operation todeliver convenient and versatile liquid temperature control for a wide range ofapplications Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD15R-40-A11B 15L Refrigerated Circulator, -40°C to 200°C, 1000W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 10 x 50ml Conical Rotor The Hermle 10 x 50ml Conical Rotor is a high-capacity centrifuge roto (more)r designed for use with Hermle Z32-HK, Z36-HK, Z327, Z366, Z446, and Z496 Series centrifuges. With a maximum speed of 10,500 RPM and a maximum RCF of 16,022 x g, this rotor is capable of efficiently and effectively separating biological samples. Its 38° angle allows for optimal separation, while its maximum capacity of 10 x 50ml provides ample space for larger samples. It is important to note that the maximum speed may vary depending on the centrifuge model used with the rotor. Overall, the Hermle 10 x 50ml Conical Rotor is a reliable and high-performing centrifuge accessory that can help researchers achieve their separation goals. INCLUDED: The Hermle 10 x 50ml Conical Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards XDS Accoustic Enclosure (110V) Edwards’ acoustic enclosures are the ideal noise reduction so (more)lution for use in a laboratory or an industrial environment. The specially designed soundproof enclosures are made of materials with high noise absorption, reducing vacuum pump noise by up to 9 dB(A), with no impact on vacuum pump efficiency.INCLUDED: The Edwards XDS Accoustic Enclosure (110V) includes: - Operator's Manual - 1 Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

IKA C-MAG HS 7 hotplate stirrer. 180*180 mm glass-ceramic hotplate. Stirring capacity 10 L. Speed ra (more)nge from 100 to 1500 rpm on a scale from 0 to 6. Temperature range from 50 to 500 °C. Heating rate 5 °C/min. LCD indicator. Fixed 550 °C safety circuit. Hot surface warning. to protect against burns. Digital indicator of error codes. It has small defects in the paint due to splashes. Dimensions (W x H x D) 215*105*330 mm. Weight 5 kg. User manual. IKA C-MAG HS 7 hotplate stirrer. New magnetic stirrer with heating and glass ceramic hotplate, characterized by very high chemical resistance.

The PS.X7 series represents a new advanced level for precision balances. The X7 series balances feat (more)ure the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. Databases in X7 series balances In new PS.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 10 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Weighing Data Management USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Benchmark One-Block Digital Dry Bath Benchmark Digital Dry Baths provide accurate “set and walk away (more)” digital temperature selection, eliminating the need for external thermometers and repetitive “fine tuning” of a temperature control knob. Simply enter the desired temperature on the digital touchpad and the Benchmark Dry Bath provides accurate temperature with real time monitoring that continuously maintains the selected temperature within ±0.2C. In addition, a digital timer is built into the touchpad display. Although it is not designed to shut off the heater, it can be used to alert the user that a chosen time interval has timed out. The cavities of the high grade aluminum blocks are precision machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature transfer. Assorted blocks are available for compatibility with nearly all common laboratory tubes and plates. Custom blocks are also available upon request. All Benchmark dry baths offer a built-in user recalibration function, to guarantee long term temperature accuracy. Each dry bath includes an easy to use block lifter, with a temperature insulated handle for quick, convenient exchange of blocks, even while they’re still hot.INCLUDED: The Benchmark One-Block Digital Dry Bath includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty