Radwag P0259.2 Cable

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Polyscience AP07R-20-A11B 7L Space-Saving Refrigerated Circulator, Advanced Programmable (-20 to 200 (more)C), 120V, 60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP07R-20-A11B 7L Space-Saving Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP07R-20-A11B 7L Space-Saving Refrigerated Circulator, -20°C to 200°C, 200W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CD-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Refrigera (more)nt R449A Working Temperature Range -30°C - 150°C Cooling Capacity 310W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CD-310F refrigerated/heating circulator with an operating range of -30…+150 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CD circulator incorporates easy change-over for control of fluid circulation internally or externally. The CORIO CD includes USB-B port for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 310W cooling power at 20 °C with 30W cooling at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CD-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 New in box Eppendorf 4 x 10ml Vacutainer Ad (more)apters, Cat. # 022639269 for the A-4-38 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022637269 are used in Eppendorf 5702/R Centrifuges. INCLUDED: The Eppendorf 4 x 10ml Vacutainer Adapters, Cat. # 022639269 includes: - Full 6 Month Parts and Labor Warranty

Square Wave Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltag (more)e Accuracy: LV Mode 5%, HV Mode 5% Pulse Length Range: LV Mode 10 µs to 999 µs/ 1 µs res, 1 ms to 999 ms/1 ms res, HV Mode 10 µs to 600 µs/1 µs Multiple Pulsing: LV Mode 1 to 120 (10 per sample), HV Mode 1 to 36 (3 per sample), Pulse Interval 0.1 s to 10 sec Capacitance in µF: LV Mode 3775 µF, HV Mode 85 µF, Voltage Droop 20% Load < 1 K Ω, 10% Load > 1 K Ω Exponential Decay Pulse Ranges Voltage Range: LV Mode 5 to 500/1 V res, HV Mode 505 to 3000/5 V res Voltage Accuracy: LV Mode 5%, HV Mode 5% Time Constant Range: LV Mode 1 ms to 5.158 S, HV Mode 0.5 ms to 133.875 ms Multiple Pulsing: Multiple Pulsing 1 to 12 (Rint <100 ohm), 1 to 24 (Rint >100 ohm), Pulse Interval 5 to 30 sec Capacitance in µF: LV Mode 25 to 3275 µF/25 µF res, HV Mode 10, 25, 35, 50, 60, 75, 85 µF Internal Resistance (in parallel with load): LV 25 to 1575 Ω / 25 Ω res, HV 50 to1575 Ω / 25 Ω res Sample Resistance (Load) Exponential Decay or Square: LV Mode PL ≤ 100ms, load ≥ 8-9 Ω, PL >100ms, load ≥100 Ω, HV Mode Load ≥ 40 Ω Charging Time: LV < 7 sec, HV < 4 sec Monitoring: Pulse Voltage, Width, Droop % and Sample Resistance Programmability: Storage over 1000 Protocols Arc Control: Yes Interlock Switches: Yes Pre-Pulse Sample Resistance Check: Yes Pulse Over Current Protection: Yes PC Control: Yes PC Communications: Yes Log Report: Yes Remote Operation: Yes Foot Switch Control: Yes Dimensions (HxWxD): 324 x 286 x 216 mm Weight: 7.3 kg

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Arctiko Flexaline LFE 60-US -10 C / -25 C Counter Top Freezer Refrigerant R600a Temperature Range - (more)25 / -10 °C (-77 / -50 °F) Capacity 2.3 Cu.Ft. (65 Liters) Features - Superior performance and temperature stability - High-quality MEC-183 digital controller with battery backup - Integrated data logger with USB interface - Attractive purchase price - Freeze guard (refrigerator models) - Door alarm - Solid door Lock - Power failure alarm (visual and acoustic) - LED light - Port hole (20mm) - Forced air cooling (refrigerator models) - UL61010 certification - Energy Star rating - 115V/60Hz supply - Sizes available from 2.11cu.ft. up to 21.11 cu.ft. The Arctiko Flexaline™ LFE 60-US counter top freezer offers the superior features required for biomedical applications at an attractive price. This model will fit anywhere due to its compact design and dimensions.INCLUDED: The Arctiko Flexaline LFE 60-US -10 C / -25 C Counter Top Freezer includes: - Key for Door Lock - Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box Design  (more)Air Displacement Piston Operated Pipette Volume Variable Number of Channels 1 Channel Features - Mechanical air-cushion pipettes manufactured in Germany - Fully automated calibration by robots - Volume-locking feature to prevent any accidental volume changes - Large and clearly visible display - Ergonomic and lightweight pipette with low pipetting and tip ejection forces to reduce strain and fatigue - Durable and robust construction using high quality UV resistant and chemical resistant materials - Fully autoclavable to ensure sterility and compliance to stringent laboratory standards - Maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance The IKA PETTE MicroKit B Vario features mechanical air-cushion pipettes with variable volume ranges of 0.1-2 µl, 2-20 µl, and 20-200 µl, all manufactured in Germany. These pipettes undergo fully automated calibration by robots and include a volume-locking feature to prevent accidental volume changes. The large, clearly visible display and ergonomic, lightweight design ensure low pipetting and tip ejection forces, reducing strain and fatigue. Constructed with high-quality UV and chemical-resistant materials, these pipettes are durable, robust, and fully autoclavable, ensuring sterility and compliance with stringent laboratory standards. The kit includes a Linea Stand, Tip xs box, and Tip s box, offering maximum user convenience with tool-less disassembly and calibration adjustment for regular maintenance.INCLUDED: The IKA PETTE MicroKit B Vario: 0.1-2 ul, 2-20 ul, 20-200 ul, Linea Stand, Tip xs box, Tip s box includes: - IKA PETTE vario 0.1-2 µl - IKA PETTE vario 2-20 µl - IKA PETTE vario 20-200 µl - IKA Linea - Tip s box (96 tips) - Tip xs box (96 tips) - Two Year Manufacturer's Warranty