Radwag KR-04-2 Converter

This compact device is ideally suited as an external light source for fluorescence excitation in mic (more)roscopy. The coupling takes place via liquid light guide. The optimized internal airflow cools the lamp effectively and ensures quiet operation. A resetable operating hour counter enables the control of lamp life. The brightness of the light can be varied with a mechanical dimming unit in 5 steps (0 to 100%). Lamp type: HXP R 120W/45C VIS with focussed reflector (OSRAM) Light output: Light guide retainer Storz long, for light guide active Ø 3 mm Shutter: Electrical control via interface, max. frequency 40 Hz, switching time approx. 6 ms Dimming: Mechanically, 5 Steps 0 to 100% Dimensions (WxHxD): 210 x 130 x 290 mm Weight: 4,7 kg

Capacity: 6100g Readability: 1 g Dimensions (WxDxH): 195 x 315 x 90 mm Weighing platform (WxD): 185  (more)x 230 mm

System consists of:  Spark Conditioned Stacker Model 931 Spark Autosampler Model 930 Spark LC-Pump M (more)odel 750 (x2) Spark High Pressure Dispensor Model 730 (x2) Spark ACE Model 725 Spark Mistral Model 885

Eppendorf 250ml Bottle Adapters for S-4-104, Cat # 5825741005 Eppendorf 250ml Bottle Adapters for S- (more)4-104, Cat # 5825741005. New in box 250mL conical tube capacity for the Eppendorf S-4-104 rotor in Eppendorf 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 250ml Bottle Adapters for S-4-104, Cat # 5825741005 includes: - Full 6 Month Parts and Labor Warranty

Motic Complete Epi-Fluorescence Attachment for BA410E The Motic Complete Epi-Fluorescence Attachment (more) for BA410E is designed to convert your BA410E microscope for fluorescence microscopy. This system connects easily to your BA410E and accommodates three filter cassettes for excitation observation. Fluorescence microscopy uses an optical phenomenon where light absorbed by a material creates molecular excitation, causing the material to re-emit light at a different wavelength. Epi-illuminators in fluorescence microscopy are adapted from vertical illuminators used in reflected light observation. The light source emits radiation that first passes through an exciting filter and then hits a short-pass filter (dichroic beam splitter). This reflected radiation enters the objective, which also acts as a condenser. The objective focuses the exciting radiation onto the object field. The emitted fluorescent light is then collected by the same objective, directed back to the short-pass filter, and finally passes through the barrier filter into the eyepiece for observation. INCLUDED: The Motic Complete Epi-Fluorescence Attachment for BA410E includes: - Epi-Fluorescence Attachment with Filter Cassette - Mercury Lamp 100W - Lamphouse HBO 100W, Collector Lens and Mercury Lamp Socket - Starter Unit HBO 100W - Lamp Centering Tool - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle 12 x 15ml Rotor The Hermle 12 x 15ml rotor is a high-performance centrifuge rotor designed fo (more)r use with the Hermle Z32-HK, Z307, and Z327 series centrifuges. With a maximum capacity of 12 x 15ml tubes, it allows for efficient processing of large volumes of samples. The rotor's 32° angle helps to ensure optimal separation of samples during centrifugation. With a maximum speed of 6,000 RPM and a maximum RCF of 4,427 x g, the Hermle 12 x 15ml rotor is capable of high-speed separations, making it ideal for applications such as molecular biology, biochemistry, and clinical research. INCLUDED: The Hermle 12 x 15ml Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Samples and applications - Food homogenization and preparation of spreadable creams and stuffing for (more) foods (e.g. meat, vegetables) - Preparation of samples for DNA analysis, organic tissue samples and dispersions of organic tissues - Homogenisation of tobacco leaves - Processing of textile fibres - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes

Memmert IN75 Natural Convection Incubator 74L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 74 L Features - 74 L (3 cu.ft.) capacity for versatile sample accommodation and efficient use of space - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Display resolution of 0.1°C for both set point and actual values - Adjustable parameters including temperature (Celsius or Fahrenheit), air flap position, and program time - SetpointWAIT function ensures process time starts only once set temperature is reached - Calibration with three selectable temperature values for precise adjustments - Language options: German, English, Spanish, and French - Stainless steel interior with a max chamber load of 264 lbs, resistant to corrosion and easy to clean - Autodiagnostic system and overtemperature monitor for enhanced safety The Memmert IN75 Natural Convection Incubator 74L, 115V is designed to provide precise temperature control and reliable performance for low-temperature applications. With a spacious 74 L (3 cu.ft.) capacity, this incubator offers versatile sample accommodation and even heat distribution through its natural convection system. Equipped with a Pt100 sensor in a 4-wire circuit, the IN75 maintains temperature accuracy to 0.1°C, managed through a SingleDISPLAY digital PID-microprocessor controller. Additional features include AtmoCONTROL software, allowing efficient data management and programming via Ethernet, and an autodiagnostic system with an overtemperature monitor for enhanced safety. Its easy-to-clean stainless steel interior and robust design make it ideal for rigorous lab environments. INCLUDED: The Memmert IN75 Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

PS.R2 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. Communication interfaces New PS.R2 balances, like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm balances with a smaller pan have a draft shield. The balance precision and the measurement accuracy is assured by automatic internal adjustment, which takes into consideration temperature changes and time flow. PS.R2 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard. Database - a direct access to databasis Function - a direct access to the basic functions F1 do F4 - programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Benchmark C2417-R MC-24R Refrigerated High Speed Microcentrifuge with COMBI-Rotor Speed Range 200 to (more) 13,500 RPM Capacity 24 x 1.5/2.0 ml + 2 x PCR Strips (w/ COMBI-rotor) Temperature -20°C to +40°C Features - The next generation touch control panel is user-friendly even with gloves - High-speed centrifugation reaches up to 13,500 RPM and 16,800 xg - Real-time RPM and RCF conversion ensures accuracy - Program storage allows saving up to 99 programs - Unique status indicator light shows the running, standby, or completed status - Compact design with a powerful motor drive reaches speeds up to 13,500 RPM - Refrigeration cools down to 4°C in less than 10 minutes - Quiet operation even at full speed Benchmark’s flagship MC-24R refrigerated microcentrifuge features a next generation touch control panel, high speed centrifugation (up to 13,500 rpm / 16,800 xg) and a unique COMBI-Rotor™ that accepts both standard microtubes (1.5/2.0 ml) and PCR tubes/strips (0.2 ml), eliminating the need for a dedicated PCR strip/tube rotor. These features combine to make this the perfect partner for any molecular biology laboratory. The MC-24R includes Benchmark’s unique COMBI-Rotor™ and features an optional hermetically sealed rotor, and a four-place PCR strip rotor. The MC-24R features adjustable acceleration/decelerations rates, real time rpm and rcf conversion, program storage up to 99, and a unique status indicator light. The status indicator light informs the user if the unit is running, in standby, or has completed a run. The MC-24R is a compact and convenient refrigerated centrifuge perfectly suited to be the workhorse for any lab.INCLUDED: The Benchmark C2417-R MC-24R Refrigerated High Speed Microcentrifuge with COMBI-Rotor includes: - COMBI-Rotor - Snap On Lid - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty