Radwag C315.6.F1.M

Easily accessible features - The special transport containers of B Medical Systems are made of polye (more)thylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 550 x 475 x 499 Internal dimensions L x W x H (mm): 340 x 260 x 270 Insulation: 90-105mm Storage capacity (gross volume of bags): 15 (450ml) / 25 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 96.14h at 43°C outdoors: up to 56.5h Conforme a ADR, RID, IMDG, ICAO-TI, IATA-DGR, Dispositivo medico di classe IIa secondo MDD 93/42 / CEE

This hand held instrument has an integral battery allowing it to be taken to where the cell cultures (more) are growing e.g. in incubation cabinets, under anaerobic conditions or even in a fume hood or safety cabinets. This robust instrument will accept a variety of cuvettes and tubes- including 10, 12, and 16 mm diameter test tubes. With no warm up time, just switch it on and it’s ready to use giving you results that are comparable to larger, more expensive spectrophotometers. The cell density of the cultures can be measured and the results stored in the memory. The results are given in Absorbance Units (OD). Once all measurements are taken, the up to 99 sample results can be viewed on the easy to read screen or the instrument can be connected to a PC or printer and the results downloaded. This low maintenance instrument uses an indefinite life LED with fibre optics and no filters. The rechargable battery automatically recharges when connected to the mains and allows up to 1 month’s normal use (under normal conditions) on a single charge. It is easily cleaned with ethanol or sterilized with formaldehyde or ethylene oxide. It is important to note that cell cultures are turbid samples, so the Absorbance (OD) measured is due to light scattering, and not due to molecular absorption. Clumping together of cells will also affect readings, so the medium they are suspended in will also make a difference. This means that the actual reading obtained is very dependent on the collecting area of the detector after the sample and the optical geometry of the system. These vary depending on the make and model of instrument, so differences in readings between types of instruments are to be expected. To use this instrument with cells other than yeast or E.coli known concentrations / cell counts (with replicates to gauge error limits) should be plotted against measured OD600 to construct a calibration curve. Wavelength range: 600 nm Lamp source: LED Beam: Single beam Optical system: LED Bandwidth: 40 nm Detector: Diode Photometric range: -0.3 to 1.99A Photometric accuracy: +/- 0.02A at 1A Photometric reproducibility: 0.02A at 1A in 10 mm cuvette Stray light: <1%T Cell compatibility: Cuvette 10mm Dimensions (WxDxH): 150 x 180 x 60 mm Weight: 0.6 Kg

Anti-siphon system for treatment of hot sterilizer wastewater.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm

Maximum Capacity: 22000 g Readability: 1 g Linearity: ±2 g Repeatability: 1 g Stabilization Time: 1  (more)s Pan Size: 174 x 230 mm Dimensions (LxHxW): 250 x 74 x 240 mm Weight: 1.5 kg