pfm medical Stretching Table 1100 Strecktisch Histo Pathology

IKA MultiDrive control BT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - TC 1 protective housing included for safe operation with dry samples - 5 spare seals included to extend the service life of blending tubes - USB interface for simplified actuation and documentation - Interval operation feature for efficient coarse crushing and thorough blending - Integrated cooling system in the milling cup for indirect heat dissipation - Built-in weighing function, allowing pre-crushing weighing in the same mixing cup - Batch processing capability with cutting, impact, blending, and dispersing operations - Brushless DC motor for reliable performance - Bluetooth interface for wireless communication Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm,and a 1000 Watt output.Interval operation is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation. Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control BT Package includes: - 5 Spare Seals - KA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive BT 250.5 Blending tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate Temperature Rang (more)e 20 to 300°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - User-friendly design of our entry-level model, featuring two rotary knobs for easy access to stirring and heating functions - Set your desired speed and temperature effortlessly using the intuitive scale, with maximum values of 1,400 rpm and 300 °C - Ensure safety with the large safety distance between the heating plate and control elements - Activate the heating function separately with the LED button indicator - Durable and reliable Kera-Disk made of anodized aluminum, offering chemical resistance and scratch proof-properties - Precise heating power and temperature control, backed by PID heating technology - Maximize efficiency with compact dimensions (168 × 101 × 299 mm) The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate is designed with two rotary knobs to allow direct access to the two main functions. The speed and temperature are set using a scale. The maximum values are 1,400 rpm and 300 °C. This magnetic stirrer is very easy to use and is equipped with the most important safety features. The large safety distance between the heating plate and the control elements, as well as the optical residual heat indicator at temperatures 50 °C, protect against burns. The heating function can be activated separately and is indicated by the LED button lighting up. The patented Kera-Disk® footprint made of anodized aluminum, is chemical-resistant, scratch-proof, and has a diameter of 135 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. The material used also enables the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110272 Hei-PLATE Mix 'n' Heat Core Advanced Sensor Package, 145mm Plate includes: - Hei-PLATE Mix'n'Heat Core magnetic stirrer (145 mm diameter) - EKT Hei-Con electronic contact thermometer and Holder - Silicone Protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Branson Disruptor Horn 1/2 in Diameter, Stepped, Solid Disruptor horn, 1/2″ diameter, stepped, soli (more)d, for processing sample volumes of 10 – 250 ml; used with Branson SFX250, SFX550, S250A, and S450AINCLUDED: The Branson Disruptor Horn 1/2 in Diameter, Stepped, Solid includes: - Branson Disruptor Horn 1/2 in Diameter, Stepped, Solid - Manufacturer's Documentation - Manufacturer's Warranty

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the stirrers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. The wide range of accessories allows Varioshake shakers to be adapted to any need without problems. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems. The video dedicated to the Lauda Varioshakes with digital control.

Patented lighting system guarantees homogeneous light distribution Variably positionable light casse (more)tte with 5 fluorescent tubes

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Suspensions/emulsions for infusion/injection - Preparation of pharmaceutical ointments and creams - Preparation of (soap, shampoo, conditioner, and creams) - Water analysis - Preparation of pigments, inks and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-5 µm - Ultimate fineness, suspensions: 5-25 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Memmert IF30 Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 32 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides - Max. loading capacity of chamber is 132 lbs, with each shelf supporting up to 44 lbs The Memmert IF30 Forced Circulation Incubator 32L, 115V is designed to deliver precise temperature control and uniform heating for a wide range of laboratory applications. With a setting temperature range from +20°C to +80°C and a working temperature range starting at 10°C above ambient, this incubator ensures reliable thermal processing. The 32L (1.1 cu.ft.) chamber, crafted from durable stainless steel with deep-drawn ribbing, is reinforced for easy cleaning and long-lasting durability. Equipped with the advanced ControlCOCKPIT, a multifunctional digital PID-microprocessor controller featuring a high-definition TFT-color display, users can easily adjust key parameters like temperature, fan speed, air flap position, and program time. To enhance operational efficiency, the IF30 incubator features forced air circulation by a quiet air turbine, adjustable in 10% increments, with an option for pre-heated fresh air admixture. Safety is prioritized through an adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880. Additionally, the incubator’s maximum chamber load is 132 lbs, with each shelf capable of supporting up to 44 lbs, making it a robust and dependable choice for precise temperature-controlled applications. INCLUDED: TheMemmert IF30 Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW