Omron Microscan LVS 9580 Barcode Verifier Typ 9580-C-3

Water Bath for incubation and inactivation of cultures. With internal circulating system Cover frame (more) and lid have mirror finish. Lift-up, insulating lid with inner camber, no dripping back of condensate into the tubes. Corrosion-resistant outer housing, made of electrolytically galvanised sheet steel, powder-coated. Drain dock at the back. The circulation system of the water bath ensures optimum temperature uniformity throughout the whole bath. An electric motor with rotary magnet is flanged to the bath floor. Its torque is transmitted to a PTFE coated stirring magnet in the bath. The stirring magnet forces the water into the centre of the bath and then evenly back again. Max. temp: 100°C Capacity: 14L Dimensions (w x d x h): 500mm x 440mm x 325mm Interior dimensions (w x d x h): 400mm x 245mm x 145mm Weight: 14.6kg 230V / 50-60Hz / 1500W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MULTI-HS 15 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display whe (more)n the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 74 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Circulation chiller DLK 402 FRYKA Product features: - Electronic temperature control with LED displa (more)y - Float switch for monitoring the coolant level - Level indicator on the front of the appliance - Alarms - Cooling unit: silent, completely hermetically sealed, air cooled, low maintenance - Several hose fittings are included - Fill neck and 3/4 'vent valve on the top of the appliance - Case made of rigid polyurethane foam - Heat exchanger in non-ferrous metal version - Alternative version DLK 402 DP: with double pump and flow rate increased to 5l / min (8mm hose), 6l / min (10mm hose) and flow pressure at 0.3 bar Technical features: Operation from -10°C to +40°C Control accuracy +/- 1 K Cooling capacity in watts at +30°C, 380W; at +10°C, 270W Circulation pump: Flow rate 4l / min; Flow pressure 0.15 bar External dimensions [LxWxH]: 26 x 37 x 40.5 cm Weight: 18kg Ambient temperature from +12°C to +30°C Electric connection: 230V / 50Hz Max current: 1,5A Coolant tank: 4l