Ohaus 30314826 6 x 85ml Fixed Angle Rotor

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz Working Temperature Range 20°C to 300°C Heatin (more)g Capacity 3000W Fluid Type Water, Silicone Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in cooling coil and drain tap The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz with 6L bath tank and lid with 3kW heating power to +300°C. Large, color touchscreen UI with built-in help functions. For internal and external temperature applications. Includes Intelligent Cascade Control, self-optimizing for optimum results with settings for band limit, limit setting, co-speed factor and control dynamics. A variable speed pressure / suction pump provides strong circulation for internal or external applications. A built-in cooling coil enables counter cooling with tap water. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male). Includes Pt100 connection for external monitoring and control, electronically adjustable pressure/suction pump, RS232/RS285, USB and Ethernet ports with optional slot for analog communication (requires module 9900100). Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

S+B End Sink cabinet Ice blue 425x600x910

SIGMA 11222 oscillating rotor with 2 rectangular buckets 13222 Max. plate height : 56mm Max speed (3 (more)-18KS / 3-18KHS): 3,000 rpm Max RCF (3-18KS / 3-18KHS): 1.218 x g Max load per support: 337 g Tmin at max speed. : <4°C Angle: 90°

LABOMAG Be9 magnetic stirrer - 1 liter New equipment in its original packaging Model: Be 9 (nine) Sp (more)eed ​​range: 100 - 1000 min⁻¹ Max mixing capacity H₂O: 1000 ml Stirring power: 4 W W×D×H: 130×195×22 mm

VACUUBRAND MZ 1C Chemistry Diaphragm Pump Ultimate Vacuum 12 mbar / 9 torr Maximum Pumping Speed 0.5 (more) cfm at 60Hz Number of Heads/Stages 2/2 Features - Outstanding chemical resistance and superior vapor tolerance. - Convenient, quick and simple to use due to the top mounted power switch. - Optimized vacuum even with gas ballast for continuous purge. - Whisper quiet and very low vibration. - Maintenance-free drive system and proven long diaphragm life. Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE-sandwich diaphragms increase reliability and extend operating life. The MZ 1C pump is equipped with a gas ballast valve for continuous condensate purge increasing the pumping capability of condensable vapors. It features slim design for space-saving installation and good vacuum performance. A manual vacuum regulator valve with dial gauge for adjustment of pumping speed and ultimate vacuum is available as accessory. Two-stage chemistry-design diaphragm pumps are an excellent choice for continuous, oil-free pumping of gases at medium vacuum requirements. In contrast to water jet pumps, they do not consume water and therefore do not produce any contaminated waste water. Typical applications are rotary evaporators, gel dryers, filtrations and many other lab applications. The MZ 1C is a powerful pump for smaller vacuum apparatus enabling continuous pumping of solvent vapors. It´s a compact, stand alone pump with low ultimate vacuum. If the process requires atmospheric condensation of pumped vapors or electronic vacuum control, we recommend the pump families based on the MZ 2C NT or MD 1C. INCLUDED: The VACUUBRAND MZ 1C Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MS 3 Digital Shaker Type of Movement Orbital Speed Range 0 to 3,000 RPM Shaking Stroke 4.5 mm F (more)eatures - Wide range of attachments - Attachment detection - Timer with countdown function - Continuous or touch operation (with standard attachment) - Stable in all speed ranges - Sturdy zinc die cast casing The IKA MS 3 Digital Shaker is a compact, universal small shaker suitable for shaking tasks with all small vessels and microtiter plates. It offers a wide range of attachments and features attachment detection, ensuring stable operation across all speed ranges. The timer with countdown function and the option for continuous or touch operation (with the standard attachment) add to its versatility. The sturdy zinc die-cast casing provides durability. It operates in two modes: Mode A, which limits the speed to 1,300 rpm with non-standard attachments and allows up to 3,000 rpm in touch mode with the standard attachment, and Mode B, which allows speeds up to 3,000 rpm with all attachments. The shaker has an orbital movement with a 4.5 mm shaking stroke, a speed range of 0 - 3000 rpm, and a 7-segment LED timer display. It is suitable for continuous operation and can handle a permissible shaking weight of 0.5 kg.

The CF1 will process up to 100 mL per minute (at maximum pressure) and is ideal for customers workin (more)g with up to 5 L of sample. 99% cell lysis efficiency with Saccharomyces cerevisiae Minimal dead loss of up to 2 mL Quick & easy to use, simply plug in and switch on No need to prime Touch screen control Cooling jacket surrounds the disruption head, simply fit your chiller to the disruption head to keep your sample cool whilst it is being processed Consistent pressure giving you repeatable results Automatic shutdown allowing you to continue with other tasks once sample has been processed Disruption head can easily be dismantled for autoclaving