Motic Panthera TEC POL (Binocular)

Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for unat (more)tended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Dispensing gun for additional flexability - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000521 WaterPro PS Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RET control-visc Speed Range 50 to 1,700 rpm Temperature Setting Range 0 - 340 °C Setting accuracy s (more)peed 10 rpm Features - BNC socket for connection of a pH electrode - Adjustable temperature control mode: rapid heating and very accurate temperature control - Dual sensor for simultaneous control of heat transfer fluid temperature and medium temperature - Timer and countdown functions - Display of viscosity change trend - Detached magnet detection - Intermittent operation - Several modes of operation available - Safety circuit adjustable from 50 to 380° - Transparent protective cover included - Error code display for easy troubleshooting - Exact temperature and speed adjustment by means of digital display; even when function switched off - Suitable for unsupervised operation - Sealed casing (IP 42) ensures a long service life PATENTED WORLD FIRST: Safety magnetic stirrer with heating and integrated balance. Clear, multilingual TFT display makes it easy to set all parameters. Integrated temperature control feature enables connection of a temperature probe, placed directly in the medium, to control medium temperature with a high degree of precision. PT 100 temperature sensor is included. The stainless steel composite hot plate, reaching a temperature of 340 °C, enables rapid heating. RS 232 and USB interfaces enable pc control of the magnetic stirrer and documentation of all test parameters. "Lock" function prevents inadvertent changes of speed and temperature settings. As a safety feature, the current temperature is displayed when the unit is switched off but surface is still hot. Below 50 °C the display turns off automatically.INCLUDED: The RET control-visc includes: - RET control-visc - PT 100.70 Temperature sensor - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - H 104 Cover for RET control - USB Cable - USB A to Micro-B, 2 m - 2 Year Manufacturer's Warranty

Set of 3 clips for 250 ml Erlenmeyer For universal platform/stirrer Gross weight: 0.132 kg Gross dim (more)ensions: 15 x 13 x 8 cm

CABINET CSB60 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Division into 4 compartments for storing the different families of non-flammable chemicals separately - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards In dotazione: - Compartment for ACIDS: 2 plasticized steel shelves - Compartment for BASES: 2 stainless steel shelves - Compartment for TOXIC SUBSTANCES: 2 painted steel shelves - Compartment for HARMFUL PRODUCTS: 2 painted steel shelves - For all shelves: maximum load of 40 kg evenly distributed Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

This Illumina High-Speed Microplate Shaker was removed from a university lab where it was surplus to (more) requirements. The unit is in full working order and has been assessed by a service engineer. It has had a brand new transformer fitted. It is in good cosmetic condition with only minor marks from use.

Hermle 44 x 1.5/2.0ml Rotor for Z216 Series The Hermle 44 x 1.5/2.0ml rotor is a high-capacity rotor (more) designed for use with the Hermle Z216 series centrifuges. With a maximum speed of 15,000 RPM and a maximum RCF of 21,127 x g, this rotor can accommodate up to 44 1.5/2.0ml tubes at a 32°/55° angle. The rotor's unique dual row and dual-angle design allows for efficient separation of samples, making it an ideal choice for a wide range of applications in molecular biology, cell biology, and biochemistry. One of the key features of the Hermle 44 x 1.5/2.0ml rotor is its high capacity. With the ability to accommodate up to 44 tubes at once, this rotor is ideal for high-throughput experiments where time and efficiency are critical. The rotor's dual-angle design ensures that samples are separated efficiently and consistently, minimizing the risk of cross-contamination and producing reliable results. INCLUDED: The Hermle 44 x 1.5/2.0ml Rotor for Z216 Series includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm Features: - Recommended for standard  (more)applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm includes: - 3 Year Manufacturer's Warranty

Heidolph 036110230 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate The Heidolph 03611023 (more)0 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm (also available with 135 mm on request). This makes it suitable for use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110230 Hei-PLATE Mix 'n' Heat Expert Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty