Mettler Toledo FP62 Melting Point Meter

Accuris SmartBlue Blue Light Transilluminator Safer for samples, safer for you: The SmartBlue Transi (more)lluminator is the perfect partner for the most common safe DNA stains. It emits blue light at a wavelength of 465nm, perfect for excitation of most green fluorophors, including Accuris’ SmartGlow, SYBR Green, SYBR Safe, SYBR Gold, GelStar, GelGreen, to name a few. The SmartBlue also works for excitation of EtBr. Exposing DNA to this wavelength does not cause molecular damage, and results in a much higher downstream cloning efficiency as compared to even short UV light exposures. In addition, the visible blue light is not damaging to the user’s skin and is less harmful to the eyes. Two position filter cover: The SmartBlue transilluminator requires no special shielding, however, the light does need to be filtered for visualization of the dyes. The amber cover, which rests above the viewing surface and gel, filters out the blue light, allowing the bands to be seen clearly. The cover can be placed at a 60º angle to provide easy access to the gel for band excision. For documentation, the filter cover is easily removed completely. Optional amber viewing glasses: The E4000-VG Viewing Glasses offer efficient blocking of the blue light wavelength from the SmartBlue illuminator, allowing clear visualization of the fluorescing DNA bands without the filter cover in place. These convenient glasses are recommended for users that are frequently excising DNA bands from gels. UI technology, bright and clear images: Engineered diffusers and filters provide an extremely evenly lit viewing surface. Even in ambient light, bands of DNA can clearly be seen in gels. Images obtained using the SmartBlue Transilluminator are brighter and more balanced than those obtained using epi-illuminators which light from the sides. Reliable, durable and long lasting: An array of super bright LEDs with a long, 30,000 hour service life provide the light source for the SmartBlue Transilluminator. Unlike those in a UV transilluminator, the filters in the SmartBlue will not solarize and degrade in performance over time. Gel bands can be excised directly on the scratch resistant, glass viewing surface. To save energy, the power switch includes an automatic 5 minute shutoff. INCLUDED: The Accuris SmartBlue Blue Light Transilluminator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 23x2.6-8ml Adapters for S-4-104, Cat # 5825738004 New in box Eppendorf 23 x 2.6-8ml adapte (more)rs (Cat. # 5825738004) 23 x 2.6 to 8mL tube capacity for the Eppendorf S-4-104 rotor in Eppendorf 5810/5810R centrifuges. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 23x2.6-8ml Adapters for S-4-104, Cat # 5825738004 includes: - Full 6 Month Parts and Labor Warranty

Demo-Instrument in original packaging. 6 months warranty. Thermo product description: TF14 D A 200-2 (more)30/GL T1 1.0KW+ Features: - Digital Display - Power supply: 200-230V - 50/60 Hz - Heating power: 1 kw - Cooling power: 1170 W - Turbin pump (9,5 l/min at 4,1 bar)

Porcelain pestle French shape JIPO For laboratory mortar Diam 34mm Length 140mm

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immediate release.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

Christ Rotations Vacuum Concentrator System RVC 2-25 CT 02-50 This was removed from a university lab (more) where it was surplus to requirements. All elements of the system power up and are in good working order. The system is in good cosmetic condition with minor marks. Included are; Christ RVC 2-25Type - 100225 Christ CT 02-50Type - 100502 Vacubrand Diaphragm Vacuum PumpModel - MZ 2C

Fisher Scientific FS DryBath Standard 4 Block Heater This item was removed from a university laborat (more)ory where it was surplus to requirements. The dry bath is in very good cosmetic condition and operates as expected. (Thermometer not included.) Specifications: - Model: FS DryBath Standard 4 Block Heater - Cat No.: 88860026 - Serial No.: HBBF60026005 - Temperature Range: Ambient +5˚C to 130˚C - Temperature Accuracy: ±0.5˚C at 37˚C Included: - 1 x 12mm x 96 well block - 1 x written user manual

Yamato LM-200A Overhead Flask Mixer, 115V Speed Range 50~1000 rpm Max. torque 0.1N•m Adaptable flas (more)k size 50~5000 ml Features - Wide range rotation speed of 50-1000 rpm - Maintenance free and superior DC brushless motor - Belt drive transmission minimizes noise and vibration - Capable of vacuuming up to 399.9Pa without impairing rotation efficiency - Directly attachable to a three-neck flask 24/40, 29/42 optional - Variety of stirring shafts and blades available to handle small to large volume samples - Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option - At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option - Equipped with 24/40 rotary joint, 29/42 optional - Capable of AC100-240V by changing power cord Compact design laboratory flask stirrer featuring integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. Equipped with digital indicator. Wide range rotation speed of 50-1000 rpm. Maintenance free and superior DC brushless motor. Belt drive transmission minimizes noise and vibration. Capable of vacuuming up to 399.9Pa without impairing rotation efficiency. Directly attachable to a three-neck flask 24/40, 29/42 optional. Variety of stirring shafts and blades available to handle small to large volume samples. Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflon®rubber seal available as option. At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez® o-ring available as option. Equipped with 24/40 rotary joint, 29/42 optional. Operating speed range 50-1000 rpm. INCLUDED: The Yamato LM-200A Overhead Flask Mixer, 115V includes: - Hexagon socket head cap screw & wrench - AC Adapter - 3m Power Cord - Coupling Cover - Handle - Flask Clip - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

PROFESSIONAL SCALE, SUITABLE FOR DIFFERENT USES Striking the ideal balance of inventive features and (more) simple, functional weighing capabilities, the OHAUS Adventurer Series has all the applications you need for routine weighing and measurement tasks. Featuring a color touchscreen, GLP/GMP compliance features, two USB ports, and more, the Adventurer is the most comprehensive scale in its class. - Color touchscreen, with icons and intuitive guidance - Useful for a wide variety of applications - Structure and construction among the best Ohaus: resistant, large weighing surfaces, space-saving design of the draft shield and protective hood allow use in laboratory, educational and industrial environments. Other standard features and equipment RS232 interface, integrated weigh below hook, protective cover for the entire base structure, removable stainless steel pan, die-cast metal base, safety bracket, front and illuminated level bubble, four feet adjustable, software lockout menu, stability indicator, overload/underload indicators in software, user selectable environmental settings, audible indicator, user selectable brightness level settings, auto dimming, touchscreen calibration, auto tare, operating language user selectable (nine). MODELLI DISPONIBILI LABORATORY INSTRUMENT Dual USB ports. Front USB easily accessible and simplifies data downlaod. On the back of the scale there is a second USB port to be able to connect it to the PC. It will also be possible to upload user settings to USB, saving different profiles and transporting them to other Adventurer scales. Real time clock with GLP/GMP data. This feature keeps accurate time even in the event of a power failure, and the GLP data function has the ability to log sample name, project names, and balance IDs to help meet traceability and compliance requirements. The draft shield doors consist of two glass panels that will take up very little space on your counter. The large side entrance will allow for unobstructed access and easy cleaning, ensuring a safe working environment while minimizing contamination. Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Dynamic/Animal Weighing, Totalization/Statistics, Formulation, Density Determination, Display Hold Display 4.3' (109 mm) touchscreen display with color VGA graphics resolution and user controlled brightness Operation AC adapter (included) Communication RS232, USB host, USB device (included). Real time clock with GLP/GMP data output. Framework Metal base, ABS top housing, stainless steel pan, glass draft shield with two-piece top-mounted side doors and sliding top door (1 mg models only), illuminated front level bubble, hook for weighing below, safety bar Construction features Selectable environmental filters, auto tare, user selectable pot life calibration points, software lockout and reset menu, user selectable communication settings and print options, user configurable project and user IDs, up to 9 operating languages