Masterflex Ismatec Reglo Digital Miniflex 2.0 78018-40 ISM351 NEW!

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

For fluid group: 1 Capacity: 50Ltr Weight: 14.6kg Max. Operating pressure: 4bar Operating temperatur (more)e: -20 to 80°C Central opening diameter: 97mm Side openings diamter: 23mm

Scilogex Circular Tube Holder for 1.5ml x 60 TubesThe Scilogex Circular Tube Holder accommodates 60  (more)x 1.5ml tubes. For use with the Mx-RD-Pro LCD Digital Tube Rotator. INCLUDED: The Scilogex Circular Tube Holder for 1.5ml x 60 Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 13 x 50ml Adapters, Cat. #: 5920715003 The Eppendorf 13 x 50ml Adapters, Cat. #: 592071500 (more)3 are for use with the high capacity buckets of the Eppendorf S-4x1000 Rotors. These adapters feature a capacity for 13 x 50ml conical tubes each with the maximum tube dimensions (Diameter x Height) of 30mm x 116mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 13 x 50ml Adapters, Cat. #: 5920715003 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 13 x 50ml Adapters, Cat. #: 5920715003 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf S-4x1000 Swing Bucket Rotors

Accuris myGel InstaView Gel Tank w/ Blue LED Illuminator For labs that prefer to use a separate powe (more)r supply, theInstaView Gel Tank is the perfect choice for running, viewing and documentingelectrophoretic separations. The InstaView Gel Tank accommodates one large(10.5x10cm) or one small (10.5x6cm) gel tray and is supplied with trays, combsand a leak-proof casting stand. The gel tank lid includes attached power leadswhich prevent the unit from operating without the lid properly in place. Anystandard power supply can be connected, including the Accuris myVolt™ Mini andmyVolt Touch. The InstaView Gel Tank is shaped to allow the mini LED transilluminator(included) to slide underneath. Blue light, at a wavelength of 465nm, providesexcitation of common green fluorescent stains such as SmartGlow™, SYBR™ Green,and GelGreen. An orange filter is incorporated into the gel tank lid forvisualizing the DNA in the gel box without any additional equipment or glasses.The transilluminator can be turned on at any time during a run to trackprogress, and automatically shuts off after 5 minutes. After electrophoresis,simply place the included imaging enclosure over the InstaView Gel Tank tocapture high resolution images with a smart phone. Images are easily printed orshared via email or text message. INCLUDED: The Accuris myGel InstaView Gel Tank w/ Blue LED Illuminator includes: - Gel Trays - Combs - Leak-proof Casting Stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The 4titude a4S Automatic Heat Sealer requires no air supply, enabling the flexibility to be used on (more) standard lab benches as a stand-alone unit, or integrated within a robotic set up. The unit features a rapid heating element for quick start-up, and the stand-by function saves energy when the unit is not in use. The 4titude a4S Automatic Heat Sealer is compatible with a wide range of SBS footprint plates, including all PCR plate formats from 96 well to 1536 well, assay plates, deep well storage plates and microplates. Varying plate heights, from 3 mm to 60 mm can be accommodated with minimal adjustments of the instrument. Plates are presented in the portrait format and the plate position on the shuttle allows good access for robotic integration. Rolls with a width of between 75-85 mm can be loaded in either of two roll positions, depending on roll length and available space, enabling the 4titude a4S Automatic Heat Sealer to fit under the gantree of most liquid handling robots. The width and length of the applied seals are set to precisely cover an SBS footprint plate without interfering with plate stacking. The seal position can be adjusted to give an overhang at one end of the plate to facilitate ease of seal removal. Specifications: Sealing Temperature Range: 100 – 195°C Sealing Time Range: 0.1 – 10 Sec Connection: RS-232 Serial Port, USB Port Dimensions: 230 x 507 x 276 mm Weight: 27 kg

Heidolph Reax 2000 mixer. Speed 200-2400 l/min. Heidolph Reax 2000 vortex is a high-quality laborato (more)ry equipment that provides fast and efficient agitation for liquid samples in test tubes or vials. With an adjustable stirring speed and compact design, this stirrer is ideal for homogeneously mixing liquids in molecular biology, biochemistry and chemistry applications. Additionally, its quiet operation and non-slip platform make it a reliable and safe tool for any laboratory.

The dusting brush for mass standards is an essential tool for anyone working with mass standards in  (more)metrology, chemical and other laboratories. Designed to maintain the highest standards of accuracy and hygiene, allows efficient yet safe removal of contaminants from the surface of the mass standard. Dusting Brush for Mass Standards by RADWAG – Features Dimensions Diameter: 30 mm, length: 250 mm. Precision bristles Soft and synthetic bristles do not scratch the surface of the mass standard, and as a result, do not interfere with its accuracy. Ergonomic handle The handle of the brush is adapted to the hand of the user, who can thus operate it precisely and comfortably even for many hours. Antistatic properties The brush reduces the risk of attracting dust and fine dirt. This is crucial when working with a mass standard of high accuracy class. Easy to clean Easy cleaning and maintenance of the brush translates into the ability to use it for a long time. Why Choose a Dusting Brush for Mass Standards? Highest quality workmanship Our brush is designed for demanding laboratory conditions. Trust of experts It is recommended by professionals in the field of metrology and calibration. Mass standard durability The fine bristles and anti-static properties of the brush ensure that the mass standards cleaned with it remain durable and thus do not lose their accuracy.

Accuris PR2121-N-25BLK qMAX Probe One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml) qM (more)AX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris Probe One-Step RT-qPCR Kit, No ROX, 2500 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty