Lighthouse Instruments FMS-1400H FMS-Water Activity Headspace Analyzer

Labconco CentriVap Cold Trap with stainless steel lid Brushed, Stainless Steel and Powder-Coated (more) Steel Exterior Illuminated Temperature Graph with Endpoint Indication (Operating temperature of -40° C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -50C in less than 30 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel DrainPort (with corrosion-resistant, nylon valve INCLUDED: The Labconco 7811021 CentriVap Cold Trap with stainless steel lid, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco CentriZap micro IR Strobe Light, ReplacementReplacementstrobe light enables user to shine a (more) strobe light into the CentriVap's microIR's chamber to easily view samples while the rotor is spinning. A strobe lightis included with each CentriVap micro IR. INCLUDED: The Labconco 7549000 CentriZap micro IR Strobe Light, Replacement includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo CORIO CP-1000F Refrigerated Circulator, 115V/60Hz Working Temperature Range -50°C to 200°C C (more)ooling Capacity 1000W at 20°C Refrigerant R449A Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB & RS232 connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 The CORIO™ CP refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperatures between -20°C to -50°C with an upper limit of 200°C. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. USB and RS232 connections for external PC control and data-logging. A space-saving cooling coil design yields more usable space in the bath tank. Bath lid and drain tap included. PID temperature control provides ± 0.03°C stability. Adjustable centrifugal pump capacity of 8…27 L/min with pressures 1.5…10.2 psi. Stainless steel bath tank. Class III (FL) according to DIN 12876-1. Click Here to View Product Video INCLUDED: The Julabo CORIO CP-1000F Refrigerated Circulator, 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

System consists of: Waters Acquity Solvent Tray Waters Acquity TUV Detector Waters Acquity FTN Sampl (more)e Manager Waters Acquity Quaternary Solvent Manager No software included

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Benchmark IPD1196-40 96 well plate, prefilled with 4mm beads, pack of 10 The Benchmark IPD1196-40 96 (more) well plate is a pre-filled bead-beating plate designed for the homogenization of biological samples. The pack contains 10 plates, each with 96 wells filled with 4mm beads. These beads effectively homogenize a variety of sample types, including tissue, plant material, and microbial cultures. The pre-filled plates save time and reduce the risk of cross-contamination as they are pre-sterilized and ready to use. The plates are compatible with popular homogenizers and can be used for a wide range of applications, including DNA and RNA extraction, protein isolation, and metabolomics studies. The Benchmark IPD1196-40 96 well plate is an excellent choice for high-throughput sample processing in research and clinical laboratories.INCLUDED: The Benchmark IPD1196-40 96 well plate, prefilled with 4mm beads, pack of 10 includes: - Operator's Manual - Manufacturer's Warranty